|
| مكان المنشأ: | قوانغدونغ، الصين |
| اسم العلامة التجارية: | Hanast |
| إصدار الشهادات: | MSDS |
| رقم الموديل: | HN-635 |
HN-625 A/B is a two-component liquid silicone material. The two components are mixed in a ratio of 100:2. This product cures at room temperature.
Application of Tin Cure Silicone Rubber
HN-6XX series silicone is a tin-curing silicone,consisting of two components, A and B, in aratio of 100:2. It is a silicone that is cured bycondensation reaction at room temperatureafter being stirred evenly.
Technical parameter of Tin Cure Silicone Rubber
| Model | HN-625AB |
| Feature | easy foaming |
| Viscosity (cs) | 170000 |
| Gravity ( G/cm 3 ) | 1.06 |
| Hardness(A°) | 20 |
| Strength( MPa) | 3.1-3.6 |
| Tear Strength (kN/m ) | 19.8-24.3 |
| Elongation(%) | 600-720 |
| Linear Shrinkage(%) | ≤0.2 |
| Curing Agent Addition Ratio(%) | 2-3% |
| Operating Time( mins ) | 30-40 |
| Curing Time( hours ) | 3-4 |
Feature of Tin Cure Silicone Rubber
1.Exceptional Fluidity and Penetration
Tin-cured silicone features a low initial viscosity, exhibiting excellent self-leveling properties akin to a true liquid. This allows it to effortlessly penetrate the intricate crevices and fine textures of a prototype, automatically displacing air bubbles to ensure that the resulting mold precisely replicates every single detail of the original object.
2.Exceptional Physical Strength (Tear and Tensile Resistance)
Upon curing, this type of silicone exhibits remarkable toughness. Even when used with stone carvings or artworks featuring deep undercuts or intricate structures, the mold resists tearing or deformation—even under forceful pulling—during the demolding process. This significantly enhances the mold's durability and extends its service life, allowing for a high number of repeated castings.
فيديو
فيديو
فيديو
فيديو
فيديو
فيديو
فيديو
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
