10:1 Soft 25 Shore A Two Part China Silicone Potting Gel RT Cure for Solar Inverter Household Appliance

HANAST HN-8808 A/B Soft Two Part Silicone Potting Gel

HN-8808 A/B is a soft, two-component condensation-cure (RTV-2) silicone potting gel supplied in a 10:1 ratio and formulated for solar inverter encapsulation and household appliance electronics protection. Mixed at 10:1 by weight, it cures at room temperature into a soft, stress-relieving transparent elastomer that cushions vibration and mechanical shock while insulating and moisture-sealing the assembly. The cured gel is non-toxic, odorless, non-corrosive and self-adhesive to metal and plastic substrates.

Key Features

• Soft stress-relief elastomer that absorbs vibration and cushions delicate components
• 10:1 mix ratio by weight with room temperature curing for easy, oven-free production
• Light formulation weighing less than water, reducing finished assembly mass
• High dielectric strength of 14 kV/mm or more for high-voltage isolation
• Wide operating temperature range from -50°C to 200°C for outdoor and thermal-cycling conditions
• Primerless adhesion to aluminium, iron, acrylic and PC plastics
• Non-toxic, odorless and non-corrosive curing, suitable for consumer appliance electronics
• Waterproof and moisture proof, protecting boards from humidity and condensation
• Small chemical shrinkage with no exotherm and no post-cure PCB warping
• RoHS and REACH compliant, supplied as a general chemical with SDS available
• 6 months shelf life with stable storage and easy shipping

Typical Applications

• Solar inverters: micro-inverter PCBs, string inverter control boards and MPPT charge controllers
• Household appliances: washing machine control boards, refrigerator inverter PCBs, air conditioner outdoor units and induction cooker power modules
• Smart home and IoT controllers requiring consumer-safe, non-toxic encapsulation
• Outdoor LED drivers, floodlight modules and street light power supplies
• Industrial equipment: motor controllers, power distribution boards and automation modules
• Aluminium substrate and general electronic encapsulation requiring transparent, waterproof insulation

Technical Data (per TDS HANAST-TDS-027)

OEM / ODM Customization & Bulk Supply

As a direct silicone potting gel manufacturer, Hanast supports OEM and ODM customization of hardness, viscosity, cure speed and dielectric formulation for specific solar inverter and household appliance applications, and provides an SDS on request. Wholesale and factory-direct bulk supply in iron drums is available for high-volume production lines.

Packaging & Storage

Supplied as Component A (20kg or 10kg iron/plastic drum) together with Component B (2kg or 1kg plastic bottle), or as ready 10:1 kits of 22kg/set or 11kg/set. Keep components sealed in a cool, dry, ventilated place below 25°C, protected from direct sunlight and moisture. Shelf life is 6 months; best used within 3 months. Classified as non-dangerous goods for transport.

FAQ

Q1: What is HN-8808 A/B and which applications does it suit?
A1: HN-8808 A/B is a soft 10:1 two-component room-temperature cure silicone potting gel. It is designed for solar inverter encapsulation (micro-inverters, string inverters, MPPT controllers) and household appliance electronics such as washing machine boards, refrigerator inverters, air conditioner outdoor units and induction cookers.

Q2: How soft is the cured gel and does it protect delicate components?
A2: The cured gel is a soft, stress-relieving Shore A 25 elastomer that absorbs vibration and mechanical shock and cushions thermal expansion stress, helping protect ceramic capacitors, fine-pitch SMD parts and flexible circuits.

Q3: What is the mix ratio and curing schedule?
A3: Mix Component A and Component B at a 10:1 ratio by weight. The compound cures at room temperature, with full cure in 8-24 hours at 25°C. After initial cure, gentle heating not exceeding 60°C may be used to accelerate curing.

Q4: Does it adhere without a primer and is it suitable for outdoor use?
A4: Yes. HN-8808 offers primerless adhesion to aluminium, iron, acrylic and PC plastic, and its wide -50°C to 200°C operating range and moisture resistance suit outdoor thermal cycling and humid conditions.

Q5: What certifications, MOQ and packaging are available?
A5: HN-8808 is RoHS and REACH compliant with an SDS available, and is classified as non-dangerous goods. It is supplied in 22kg/set or 11kg/set 10:1 kits, with wholesale and OEM/ODM bulk supply supported.