2026-11-13
Silicone gel is a two-component, addition-cure silicone material. After components A and B are mixed at the specified formulation ratio, the material cures into a soft, jelly-like state. Its low cross-linking density helps it remain flexible and low-stress, making it different from rigid potting compounds and conventional liquid silicone materials.
HANAST silicone gel can be adapted to applications requiring soft cushioning, electrical insulation, moisture protection, transparent encapsulation, or gap filling. Hardness, viscosity, curing time, and color can be customized according to the product design and processing requirements.
| Characteristic | Application Value |
|---|---|
| Two-component addition cure | Cures after components A and B are thoroughly mixed according to the specified ratio for the selected formulation. |
| Low viscosity and self-leveling | Flows into grooves, gaps, and around complex components to support uniform filling. |
| Soft, low-stress structure | Helps cushion delicate parts and reduce mechanical stress on solder joints, chips, and other fragile components. |
| Electrical insulation and waterproofing | Supports the protection of electronic assemblies against moisture and environmental exposure. |
| Operating temperature range | -50°C to 200°C, depending on the selected formulation and actual operating conditions. |
| Low volatility and no cure byproducts | Suitable for applications where clean curing and dimensional stability are important. |
| Transparent options | Allow internal components to remain visible for inspection, testing, and maintenance. |
| Customizable properties | Hardness, viscosity, curing time, and color can be adjusted for different product and process requirements. |
| Certification | FDA-certified options are available for relevant applications. The applicable grade should be selected according to the intended use. |
The soft texture of silicone gel makes it suitable for products that require cushioning, conformability, and a skin-like tactile feel. For applications involving human contact, an appropriate FDA-certified grade should be selected and evaluated against the requirements of the finished product.
Silicone gel can be used in breast pads, breast stickers, and related intimate-fit accessories. Its soft and conformable structure helps the product follow body contours while maintaining a comfortable feel during wear.
For foot pads, insoles, seat cushions, and other pressure-relief components, silicone gel provides soft support and helps distribute localized pressure. The formulation can be adjusted to balance softness, deformation response, and product shape requirements.
Silicone gel can be integrated into lifelike models, film and television props, and other products requiring a soft, skin-like surface. Custom hardness and pigmentation allow the material to be matched to different tactile and visual design goals.
Electronic components can be damaged by moisture, vibration, impact, and stress caused by temperature changes. Compared with rigid potting materials, soft silicone gel forms a compliant protective layer that helps cushion delicate assemblies while providing insulation and environmental protection.
After transparent two-component silicone gel cures, the encapsulated components remain visible. This makes it easier to inspect the assembly and identify potential faults without immediately removing the entire protective layer.
The soft cured gel can also support probe access and localized removal where repair is required. After servicing, the affected area can be refilled with a compatible silicone gel, subject to the recommended repair process.
Within its specified temperature range of -50°C to 200°C, silicone gel can accommodate dimensional changes in encapsulated assemblies and reduce stress transfer to fragile components. This makes it suitable for selected electronic modules used in new energy vehicles, 5G infrastructure, and industrial control equipment.
Silicone gel can also be used in stress-relief toys, soft cushioning parts, and creative electronic accessories. High-transparency grades are suitable when both internal visibility and a clean appearance are required.
Low viscosity and self-leveling behavior allow silicone gel to flow into narrow spaces and irregular structures. These characteristics make it useful for industrial sealing and filling tasks where complete coverage and low mechanical stress are required.
Silicone gel can fill filter grooves, joints, and perimeter gaps to create a continuous seal. Proper application helps reduce leakage paths and supports the sealing reliability of filtration equipment.
The material can be used to seal selected liquid tanks and fill gaps in precision instruments. Its slight adhesion helps it conform to adjacent surfaces without introducing the rigidity associated with conventional hard potting materials.
Material compatibility and sealing performance should be verified using the actual tank material, liquid medium, component geometry, and service conditions before production use.
| Process Step | Recommended Consideration |
|---|---|
| Grade selection | Define the required hardness, viscosity, transparency, color, temperature exposure, and certification needs. |
| Surface preparation | Keep components and filling areas clean and free from dust, oil, water, and other contaminants. |
| Mixing | Mix components A and B at the ratio specified for the selected formulation until the material is uniform. |
| Filling or potting | Apply the mixed gel evenly and allow its self-leveling behavior to fill gaps and surround components. |
| Curing | Follow the product-specific curing conditions. Curing time can be customized to suit the production process. |
| Validation | Confirm cure condition, adhesion, insulation, sealing, temperature resistance, and compatibility under actual service conditions. |
HANAST silicone gel formulations can be adjusted to meet different application and manufacturing needs:
Corresponding process guidelines can be provided based on the selected formulation and intended application.
The stated operating temperature range is -50°C to 200°C. Suitability should be confirmed according to exposure duration, component design, mechanical load, and the specific formulation.
Yes. Curing time can be customized to match different production processes. The final curing parameters are defined for the selected formulation.
Transparent gel keeps internal components visible and its soft structure can facilitate localized access. Whether an assembly is repairable depends on its design, process, and component layout.
Yes. FDA-certified options are available for relevant applications. The required grade and compliance documentation should be confirmed based on the product’s intended use and contact conditions.
Key information includes the application, target hardness, desired viscosity, color or transparency, curing-time requirements, operating temperature, substrate materials, and any applicable certification requirements.