2026-11-13
Brick Carving Mold Silicone Hardness Selection Guide
When choosing the hardness of mold silicone for brick carving, there isn't a single, absolutely fixed value. It depends on the size and depth of the brick carving, as well as the mold material you intend to use. HANAST will analyze this in detail today: The Logic of Matching Brick Carving Characteristics with Mold Silicone Hardness: Brick carvings typically include intricate relief textures, openwork structures, or tiny bumps and depressions. This requires silicone with high fluidity to fill these details, while also having a tear resistance ≥20KN/m to prevent tearing during demolding.
Low-hardness silicone, such as 10-20A: Excellent fluidity, suitable for casting molds with complex details, but weaker tear resistance, requiring reinforcement with fiber cloth.
Medium-hardness silicone, such as 30-40 A: Balances fluidity and strength, suitable for medium-sized brick carvings, and can withstand minor external forces.
High-hardness silicone, such as above 50 A: High strength and wear resistance, suitable for large-sized molds or those requiring long-term repeated use, but poor fluidity, requiring vacuum degassing or layered casting.
Size and Support Requirements
For small brick carvings (under 10cm): 20-30 A silicone is recommended. It has good fluidity, is easy to demold, and has a lower cost.
For medium to large brick carvings (over 30cm): 40-50 A silicone is recommended. It needs to be used in conjunction with fiberglass cloth or a plaster mold for reinforcement and to prevent mold deformation.
For irregularly shaped or thin-walled structures: A silicone thickener needs to be added to increase viscosity and prevent excessive flow that could blur details.
Application Environment and Durability
* Outdoor Scenarios: Weather-resistant silicone is required, with a temperature range of -50℃ to 200℃ and strong anti-aging properties.
* High-Temperature Environments: High-temperature resistant silicone is required to prevent softening and deformation.
* Chemical Corrosion Environments: Acid and alkali resistant silicone is required to resist corrosion from acid rain, cleaning agents, and other chemicals.
When creating molds for brick carving, HANAST recommends selecting a mold silicone of 30-50 Ayered pouring, heat curing, and fiber cloth reinforcement processes can be used to enhance mold strength and detail capture capabilities. For further optimization, purchasing HANAST brick carving mold silicone allows for sample delivery and adjustment of silicone hardness and process parameters.