Rumah > Produk >
Gel Silikon Elektronik
>
10:1 Transparent Silicone Potting Compound Flame Retardant High Dielectric Strength for Power Module

10:1 Transparent Silicone Potting Compound Flame Retardant High Dielectric Strength for Power Module

Detail Produk:
Tempat asal: Shenzhen, Guangdong, Tiongkok
Nama merek: HANAST
Sertifikasi: RoHS, REACH, SDS available
Nomor model: HN-8808 A/B
Informasi Rinci
Tempat asal:
Shenzhen, Guangdong, Tiongkok
Nama merek:
HANAST
Sertifikasi:
RoHS, REACH, SDS available
Nomor model:
HN-8808 A/B
model:
HN-8808 A/B
Jenis:
Senyawa Pot Silikon Penyembuhan Kondensasi Dua Komponen (RTV-2).
Rasio campuran:
10:1 berdasarkan berat
Jadwal Penyembuhan:
Penyembuhan suhu kamar; penyembuhan penuh 8-24 jam pada 25 C
Penampilan:
cairan transparan
Komponen Viskositas A:
2200-2600 mPa.s pada 25 C
Komponen Viskositas B:
20-30 mPa.s pada 25 C
Kepadatan:
0,94 +/- 0,02 gram/cm3
Kekuatan dielektrik:
>=14 kV/mm
Konstanta dielektrik:
<=3.0
Perpanjangan saat putus:
<=100%
Suhu Operasional:
-50C hingga 200C
Tahan Api:
Ya (formulasi tahan api)
Adhesi:
Daya rekat tanpa primer pada aluminium, besi, akrilik, dan PC
Kepatuhan:
RoHS, REACH, bebas halogen; SDS tersedia
Klasifikasi Keselamatan:
Tidak Berbahaya (bahan kimia umum)
Kemasan:
22kg/set (20kg A + 2kg B) atau 11kg/set (10kg A + 1kg B)
Umur Simpan:
6 Bulan
Menyoroti:

High Light

Menyoroti:

Custom OEM Flame Retardant Potting Compound

,

Wide Temperature Non-Corrosive Silicone Encapsulant

,

RoHS REACH High Dielectric Potting Gel

Informasi Perdagangan
Kuantitas min Order:
1kg
Harga:
Dapat dinegosiasikan
Kemasan rincian:
22kg/set (20kg drum A + 2kg botol B) atau 11kg/set (10kg + 1kg), kontainer tertutup, dikirim melalui
Waktu pengiriman:
3-5 hari kerja untuk sampel, 7-15 hari untuk pesanan massal
Syarat-syarat pembayaran:
T/T, L/C, Western Union, Paypal
Menyediakan kemampuan:
120 Ton per Bulan
Deskripsi Produk
HANAST HN-8808 A/B Transparent Silicone Potting Compound HN-8808 A/B is a two-component condensation-cure (RTV-2) liquid silicone potting compound supplied in a 10:1 ratio. After mixing Component A and Component B at 10:1 by weight, the compound cures at room temperature into a transparent, high-performance elastomer for potting and encapsulation of power modules, PCBs and electronic assemblies. The cured material features good adhesion, no corrosion, small chemical shrinkage
Penilaian & Ulasan

Peringkat Umum

5.0
Berdasarkan 50 ulasan untuk pemasok ini

Cuplikan Penilaian

Berikut ini adalah distribusi semua peringkat
5 bintang
100%
4 bintang
0%
3 bintang
0%
2 bintang
0%
1 bintang
0%

Semua Ulasan

I
I*y
India Aug 6.2026
Our technical department speaks highly of this silicone gel for electronics,very suitable for our flow maters; we have collaborated three times already and will continue to work together in the future.