![]() |
Brand Name: | Hanast |
Model Number: | HN-6600AB |
MOQ: | 1kg |
Price: | Negotiable |
Packaging Details: | 25KG/barrel |
Payment Terms: | T/T |
Professional Silicone Manufacturer Food Grade Silicone Gel Material Non-Toxic Decompression Relax Toy Soft And Low Hardness Squishy Silicone Gel
Product Introduction
Jelly silicone gel is a two-component silicone gel. It is a new type of insulating material synthesized from silicone. It has the characteristics of no heat release, no corrosion, and low shrinkage rate when cured. It is suitable for various sealing and pouring of cosmetic powder puffs, underwear breast pads, insoles, and electronic components to form an insulation system.
Characteristics before curing
|
||
Component
|
Component A
|
Component B
|
Color
|
Transparent liquid
|
Transparent liquid
|
viscosity(cp s. 25℃)
|
200-300
|
200-300
|
Relative density(mpa•s)
|
1 .0~1.12
|
0.98~1.02
|
The mixing ratio
|
A:B=1:1
|
|
Viscosity after mixing(cp s. 25℃)
|
200-300
|
|
Operate Time (25℃)
|
2 h
|
|
Penetration (1/10mm)
|
200 ~400 |
|
Curing conditions (120℃)
|
20~30 mins
|
|
Cured properties
Hardness(Shore A, 24hr) |
0~10
|
1. Before mixing, component A needs to be properly stirred manually or mechanically, and component B should be fully shaken in a sealed state before use. 2. When it needs to be attached to the application material, please confirm whether it can be attached before use, and then apply it. 3. Before construction, please weigh and mix according to the weight ratio of A:B = 1:1, and stir thoroughly before applying glue. Component A:20kgs/barrel,Component B:20kgs/barrel,
![]() |
Brand Name: | Hanast |
Model Number: | HN-6600AB |
MOQ: | 1kg |
Price: | Negotiable |
Packaging Details: | 25KG/barrel |
Payment Terms: | T/T |
Professional Silicone Manufacturer Food Grade Silicone Gel Material Non-Toxic Decompression Relax Toy Soft And Low Hardness Squishy Silicone Gel
Product Introduction
Jelly silicone gel is a two-component silicone gel. It is a new type of insulating material synthesized from silicone. It has the characteristics of no heat release, no corrosion, and low shrinkage rate when cured. It is suitable for various sealing and pouring of cosmetic powder puffs, underwear breast pads, insoles, and electronic components to form an insulation system.
Characteristics before curing
|
||
Component
|
Component A
|
Component B
|
Color
|
Transparent liquid
|
Transparent liquid
|
viscosity(cp s. 25℃)
|
200-300
|
200-300
|
Relative density(mpa•s)
|
1 .0~1.12
|
0.98~1.02
|
The mixing ratio
|
A:B=1:1
|
|
Viscosity after mixing(cp s. 25℃)
|
200-300
|
|
Operate Time (25℃)
|
2 h
|
|
Penetration (1/10mm)
|
200 ~400 |
|
Curing conditions (120℃)
|
20~30 mins
|
|
Cured properties
Hardness(Shore A, 24hr) |
0~10
|
1. Before mixing, component A needs to be properly stirred manually or mechanically, and component B should be fully shaken in a sealed state before use. 2. When it needs to be attached to the application material, please confirm whether it can be attached before use, and then apply it. 3. Before construction, please weigh and mix according to the weight ratio of A:B = 1:1, and stir thoroughly before applying glue. Component A:20kgs/barrel,Component B:20kgs/barrel,