Weather Resistant Liquid Silicone Rubber For Outdoor Decoration And Garden Mold Making
Description of Tin Cure Silicone Rubber
HN-6XX series silicone is a tin-curing silicone,consisting of two components, A and B, in aratio of 100:2. It is a silicone that is cured bycondensation reaction at room temperatureafter being stirred evenly.
Application of Tin Cure Silicone Rubber
HN-620 A/B is an industrial-grade liquid silicone rubber engineered for high-performance mold making. It is ideal for the molding and reproduction of architectural elements such as large-scale stones, cement components, gypsum products, cultural stones, and Roman columns. Additionally, it excels in the arts and crafts sector, providing precision molding for simulated flora and fauna sculptures, resin and Polyresin crafts, religious Buddha carvings, and intricate decorative ornaments.
Technical parameter of Tin Cure Silicone Rubber
| Model |
HN-620AB |
| Feature |
high tear resistance |
| Viscosity (cs) |
170000 |
| Gravity ( G/cm 3 ) |
1.06 |
| Hardness(A°) |
20 |
| Strength( MPa) |
3.1-3.6 |
| Tear Strength (kN/m ) |
19.8-24.3 |
| Elongation(%) |
600-720 |
| Linear Shrinkage(%) |
≤0.2 |
| Curing Agent Addition Ratio(%) |
2-3% |
| Operating Time( mins ) |
30-40 |
| Curing Time( hours ) |
3-4 |
Standard Technical Manual Style (Clear & Professional)
- Mixing: Shake the curing agent (Part B) thoroughly before use. Weigh the components at a ratio of 100:2 (A:B) and mix until uniform. Ensure you scrape the sides and bottom of the container to prevent unmixed material, as insufficient mixing will reduce the mold’s service life.
- Degassing: Place the mixture in a vacuum chamber to remove air bubbles. Limit vacuuming time to under 10 minutes to avoid affecting the material's properties.
- Curing: The mold will fully cure within 4 hours at room temperature. Do not force-cure with high heat. If acceleration is necessary, do not exceed 100°C. For optimal performance, allow the mold to rest for 24 hours before its first production run.
Advantages of Tin-Cure Silicone Rubber
Built to Last
Stop worrying about mold tears. Hannast silicone is tougher and more flexible than the competition, giving you more pours per mold and saving you money.
Precision in Every Detail
Our ultra-low shrinkage rate (under 0.2%) means your finished pieces will be a perfect match for the original, down to the finest hair-thin textures.
Safe & Comfortable Workspace
Craft with confidence. Our premium, non-toxic silicone is virtually odorless, making your workspace a healthier environment.
Effortless Pouring
Thanks to its excellent fluidity and self-leveling nature, bubbles escape easily on their own. Perfect for beginners and pros alike to get a flawless finish.
Your message must be between 20-3,000 characters!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
