High Tensile Strength 5 Hardness Platinum Silicone For Sex Products Realistic Prostheses And Facial Prosthetic Skin Translucent Silicone Rubber

High Tensile Strength 5 Hardness Platinum Silicone For Sex Products Realistic Prostheses And Facial Prosthetic Skin Translucent Silicone Rubber

Description of platinum silicone:

With a hardness of 5 (Shore A), this platinum-cure liquid silicone is classified as an extremely soft, ultra-flexible, and highly elastic material. Due to its exceptionally low hardness—which gives it a tactile feel similar to human skin, jelly, or soft gummies—it is unsuitable for creating industrial molds that require structural support. Instead, it is specifically designed for applications demanding extreme comfort and high elasticity, such as biomimicry, special effects makeup, maternal and infant care products, and shock absorption.

Three Key Characteristics of Platinum Silicone
 

Technical parameters:

Application of platinum silicone rubber:

1. Bionic and Human-Simulating Silicone Products (Core Application): Sex Toys and Adult Novelties
2. Special Effects Makeup and Film/TV Props: Realistic Prosthetics and Facial Appliances
3. Maternal, Medical, and Health Protection: Mother & Baby Care Products
4. Complex, Intricate Molds with Deep Undercuts: Although 5-Shore A silicone is rarely used for standard molds, its exceptionally high elongation—typically exceeding 600%—and superior tear resistance make it ideally suited for creating "single-pour molds" for small-scale objects featuring deep undercuts, blind spots, openwork designs, or extremely intricate surface patterns.

Operation method of platinum silicone:
1. Accurately weigh the AB dual component according to a weight ratio of 1:1;
2. Mix and stir well-weighed components A and B together, and make sure to stir evenly;
3. Use a vacuum machine to vacuum and exhaust bubbles, making the product smoother and bubble-free. Generally, it takes about 5-8 minutes. If there is no vacuum pump, the curing time can be extended to allow the silicone gel to naturally bubble out, but this effect is not very ideal;
4. Pour the vacuum-filled silicone into the mold, heat it in an oven at 80-100 hardness, and it will solidify in about 10 minutes;
5. Finally, demold and remove the product.