China Potting Compound Factory 10:1 Low Viscosity RTV Silicone Potting Compound for Sensor Automotive
China Potting Compound Factory 10:1 Low Viscosity RTV Silicone Potting Compound for Sensor Automotive
Ürün detayları:
Menşe yeri:
Shenzhen, Guangdong, Çin
Marka adı:
HANAST
Sertifika:
RoHS, REACH, SDS available
Model numarası:
HN-8808A/B
Ayrıntılı Bilgiler
Menşe yeri:
Shenzhen, Guangdong, Çin
Marka adı:
HANAST
Sertifika:
RoHS, REACH, SDS available
Model numarası:
HN-8808A/B
modeli:
HN-8808A/B
Tip:
İki Bileşenli Yoğuşma Kürlü (RTV-2) Silikon Saksı Bileşiği
Karışım oranı:
ağırlıkça 10:1
Tedavi Programı:
Oda sıcaklığında kürleme; Tam kürlenme 25 C'de 8-24 saat
Dış görünüş:
şeffaf sıvı
Viskozite Bileşen A:
25 C'de 2200-2600 mPa.s
Viskozite Bileşen B:
25 C'de 20-30 mPa.s
Yoğunluk:
0,94 +/- 0,02 g/cm3
Dielektrik dayanım:
>=14 kV/mm
Dielektrik sabiti:
<=3.0
Kopma uzaması:
<=%100
Çalışma Sıcaklığı:
-50 C ila 200 C
Yapışma:
Alüminyum, demir, akrilik ve PC'ye astarsız
fabrika yeri:
Shenzhen, Guangdong, Çin
Uyumluluk:
RoHS, REACH, halojensiz; GBF mevcut
Güvenlik Sınıflandırması:
Tehlikeli olmayan (genel kimyasal)
Ambalajlama:
22kg/takım (20kg A + 2kg B) veya 11kg/takım (10kg A + 1kg B)
Raf ömrü:
6 Ay
Vurgulamak:
High Light
Vurgulamak:
Low Viscosity RTV Silicone Potting Compound
,
Sensor Automotive ECU Encapsulant
,
Room Temperature Cure Silicone Potting Gel
Ticaret Bilgisi
Min sipariş miktarı:
1 kg
Ambalaj bilgileri:
22kg/set (20kg varil A + 2kg şişe B) veya 11kg/set (10kg + 1kg), kapalı kaplar, hava veya deniz yolu
Teslim süresi:
Numuneler için 3-5 iş günü, toplu siparişler için 7-15 gün
Ödeme koşulları:
T/T,L/C,Western Union,Paypal
Yetenek temini:
Aylık 120 Ton
Ürün Tanımı
HANAST HN-8808AB Low Viscosity RTV Silicone Potting Compound for Sensor and Automotive ECU HN-8808AB is a low-viscosity, two-component condensation-cure RTV-2 silicone potting compound supplied in a 10:1 ratio. Produced by our China potting compound factory in Shenzhen, Guangdong, it flows readily into densely populated PCB assemblies and narrow sensor housings, then cures at room temperature into a transparent elastomer. The cured compound insulates, cushions vibration and
Our technical department speaks highly of this silicone gel for electronics,very suitable for our flow maters; we have collaborated three times already and will continue to work together in the future.
Genel Puan
Sıralama Fotoğrafı
Aşağıdaki, tüm derecelendirmelerin dağılımıdır.Tüm Yorumlar