HN-8806 Two-component Addition Type Potting Compound
HN-8808, two parts, low viscosity potting compound that cures at room temperature to soft pliable rubber. 1. This potting silicone rubber has high moisture resistance and a wide temperature range of - 57°C to 250°C. 2. Condensed liquid silicone rubber does not use polar compounds as raw materials, and does not release by-products during cross-linking, and can maintain better electrical properties under harsh conditions. 3. Non-toxic, odorless, non-corrosive, non-swelling. 4. It has adhesive force, has adhesion to metal aluminum, iron, acrylic, and PC plastic, and can improve waterproof sealing performance
Technical Parameter
№.
Iterms
Technique Request
1
Extreior
Transparent / White/ Grey
Liquid
2
Viscosity mPa.S
(before curing)
A:2000 B:50
3
Specific gravity
(23C)
0.98
4
In commission time
(h,25C)
1-2h
5
Entirely sulphuration time
(min,25C)
8-12h
6
Hardness
(JIS A)
25A
7
Volume resistivity
(Ωcm)
≥1× 1014
8
Strength of breakdown voltage
(kv/mm)
18-25
9
Dielectric constant
(1MHZ)
2.5-3.0
10
Dielectric loss
(1MHZ)
≤4×10-3
11
Thermal conductivity
(w/m.k)
0.1-0.20
* Noted: 1. Parameters can be adjusted as required. 2. The data in this product description are non-standard values. 3. Test first before using.
Product Usage
Widely used in sealing, electrical, potting, insulation, antifouling, waterproof, shockproof, coating, electronic appliances, and comprehensive household appliances.
(2)Storage and transportation: This product is non-toxic and non-dangerous, handled as general chemicals, and stored in a cool (room temperature) dry place. (3)Shelf life: 6 months, please re-inspect after the expiration date; if it meets the standard, it can still be used.
Product pictures
Method of Application
According to the dosage, pour it into the mold after mixing according to A: B=10:1. Remove the surface bubbles and cure at room temperature (the proportion can be adjusted according to actual needs, the larger the proportion of component B, the faster the curing).