Two Component Silicone Potting Compound For New Energy Vehicle Battery Systems

Two Component Silicone Potting Compound For New Energy Vehicle Battery Systems

Product Overview for Silicone Potting Compound:

HN-8808, a two-part low viscosity potting compound, transforms at room temperature into a soft, pliable rubber with a gentle, yielding touch. Its initial liquid state flows smoothly, like warm honey, easily filling intricate spaces and crevices with minimal effort. As it cures, the air around it seems to hum with a quiet transformation, the compound gradually solidifying into a supple, almost living material. The resulting rubber boasts a velvety surface, inviting gentle pressure that yields softly before springing back, offering a tactile experience that is both comforting and resilient. Its pliability ensures it conforms seamlessly to irregular shapes, creating a protective barrier that feels as much like a second skin as it does a robust shield.

Key Performance Parameters for Silicone Potting Compound:

Application:

1. Functions: Sealing, Potting, Insulation, Anti-fouling, Waterproofing, Shockproofing.
2. Industries: Electronics, Electrical, Comprehensive Home Appliances.

Detailed Operating Guide for Silicone Potting Compound:

1. Substrate Cleaning: Ensure surfaces are perfectly free of dust, grease, or mold release agents to secure maximum bonding strength and a flawless finish.
2. Activate Sedimentary Fillers: Always stir Part A thoroughly before use to evenly redistribute ingredients—the vital first step for uniform quality.
3. Accurate Weight Blending: Precisely weigh Parts A and B at a 10:1 ratio, strictly controlling tolerances to prevent non-curing or performance loss from the source.
4. Meticulous Mixing Technique: Stir gently in a clean cup for over 3 minutes, making sure to scrape all dead zones to eliminate streaks and achieve full integration.
5. High-Efficiency Vacuuming: Vacuum-degas for 2-4 minutes to draw out trapped air until surface bubbles collapse, delivering a mirror-like appearance.
6. Smooth Casting & Curing: Pour steadily for natural leveling and let it rest at 25°C room temperature. Handles safely after 24 hours; reaches peak performance in 7 days.

Key Precautions for Silicone Potting Compound:

• Color Consistency: Filler settling in Component A causes uneven color. Must stir thoroughly before use.
• Contamination Control: Mixing and potting tools must be clean; any impurities will be very visible in the white compound.
• Do Not Heat Cure: Heating is prohibited as it causes foaming and discoloration, affecting appearance and performance.
• Controlled Environment: The curing environment should be clean to prevent dust from settling on the uncured surface.

Packaging:

10KG /20KG plastic barrelPart

A:Part B:1KG plastic barrel