OEM and ODM Silicone Potting Compound 1:1 High Voltage for RF Power Module

5G Communication Silicone Potting Compound 1:1 High Voltage for RF Power Module

This SGS certified, two-component RTV addition-cure silicone potting compound is engineered for 5G communication equipment and RF power modules. Using a 1:1 mix ratio, it cures at room temperature or in about 0.2 hour at 80°C into a durable grey elastomer with 50±5 Shore A hardness. It delivers high-voltage electrical insulation (dielectric strength 18-25 kV/mm, volume resistivity 1.0x10¹⁶ ohm.cm), 0.76 W/m·K thermal conductivity and a wide -50°C to +250°C range, protecting antenna units, base station modules and dense communication boards against heat, moisture and electrical stress.

Key Features

• SGS Certified — verified quality and safety for demanding communication projects
• 5G Communication Ready — designed for base stations, RF power modules and antenna units
• High Voltage Insulation — dielectric strength 18-25 kV/mm and volume resistivity 1.0x10¹⁶ ohm.cm
• Thermally Conductive 0.76 W/m·K — effectively transfers heat from high-power RF components
• RF Module Protection — seals and stabilizes sensitive high-frequency circuits
• Wide Temperature Range -50°C to +250°C — stable in outdoor and high-load conditions
• Low Shrinkage, No By-products — addition cure releases no heat or corrosive by-products
• 1:1 Mix Ratio — simple, accurate dosing for consistent production

Applications

• 5G base station power and RF modules
• Antenna units and communication equipment
• High-voltage transformers and power modules
• Circuit boards requiring insulation and heat dissipation

Supplied as Part A (grey fluid) and Part B (white fluid) in 10 KG, 20 KG and 50 KG sets with 6-month shelf life. Contact us for samples and OEM/ODM bulk pricing.