Non-Hazardous AB Silicone Gel 1:1 Waterproof China Electronic Potting Compound for Circuit Board

HANAST HN-6607 Non-Hazardous AB Electronic Silicone Gel

HN-6607 A/B is a non-hazardous two component silicone gel that simplifies storage, transportation and handling. Classified as a general chemical, it ships without dangerous goods documentation, reducing logistics and compliance cost while keeping full insulating and sealing performance for electronic potting.

Key Features

• Non-hazardous classification, transported as general chemical without dangerous goods certificate
• Easy transportation: no hazardous goods restrictions, saving time and cost
• Simple storage: standard cool, dry place below 25°C, no special hazardous storage needed
• Safe and eco-friendly, lower management cost
• Soft, insulating and sealing; hardness 0-10 Shore A after cure
• 1:1 mix ratio by weight, room temperature or 60-80°C accelerated cure
• Waterproof and moisture proof with dielectric insulation 2.8-3.2 kV/mm
• Wide operating temperature -60°C to 200°C
• Long operation time 120-180 minutes at 25°C
• Non-toxic, non-corrosive, solvent free and halogen free; RoHS and REACH compliant

Typical Applications

• SMEs with limited warehouse and logistics capacity
• Electronics for export markets requiring simple, compliant shipping
• R&D projects and repair sites needing quick response
• General electronics requiring reliable potting
• Sensor, junction box, PCB and LED encapsulation
• ECU, BMS, IGBT and EV battery potting

Technical Data

OEM / ODM Customization & Bulk Supply

As a direct electronic silicone gel manufacturer we support OEM and ODM customization in hardness, viscosity, curing time and operating time, and can provide an SDS stating the non-hazardous nature. Wholesale and factory direct pricing, bulk 50kg sets and private label packaging are available.

Packaging & Storage

Supplied as a 50kg set (25kg pail of Component A + 25kg pail of Component B). Keep in a sealed container in a cool, dry place below 25°C and manage as general chemicals. Shelf life 6 months. Dispose of uncured mixed material as general chemical waste; cured silicone is inert.

FAQ

Q1: Is a dangerous goods certificate needed for transport?
A1: No. HN-6607 is classified as non-hazardous and can be shipped as general cargo without such certificates.

Q2: Are there air freight restrictions?
A2: As a non-hazardous general chemical it typically has no special restrictions; please confirm the latest airline rules with your freight forwarder.

Q3: What is the mix ratio and curing schedule?
A3: Mix Component A and B in a 1:1 ratio by weight. It cures at room temperature with a 120-180 minute pot life, or can be accelerated at 60-80°C.

Q4: How should it be stored and what is the shelf life?
A4: Store in a sealed container in a cool, dry place below 25°C; shelf life is 6 months. No hazardous storage is required.

Q5: Can you provide an SDS and support bulk OEM orders?
A5: Yes, we can provide a Safety Data Sheet stating its non-hazardous nature, and we support OEM / ODM customization plus bulk 50kg set supply.