Shore A 0-10 Hardness Waterproof Electronic Silicone Gel 1:1 High Viscosity for Sensor Junction Box Potting

HANAST HN-6607 Shore A 0-10 Waterproof Electronic Silicone Gel

HN-6607 A/B is a Shore A 0-10 ultra soft two component silicone gel with excellent waterproofing and sealing performance. Before cure it is a low viscosity transparent liquid; after cure it delivers outstanding dielectric insulation over a wide range of temperature and humidity, ideal for waterproof and moisture proof potting of sensors, junction boxes and delicate electronic modules.

Key Features

• Shore A 0-10 ultra soft gel for stress free protection of sensitive components
• Excellent waterproof, moisture proofing and sealing performance
• Low viscosity 300-500 mPa·s for easy pouring and deep penetration
• Medium temperature cure, cure time adjustable; 1:1 mix ratio by weight
• Outstanding dielectric insulation 2.8-3.2 kV/mm over wide temperature and humidity
• Wide operating temperature -60°C to 200°C
• Long pot life and working time 120-180 minutes at 25°C
• Low shrinkage, no by-products, dimensionally stable cure
• Repairable, reworkable and self healing gel
• Non-toxic, non-corrosive, solvent free and halogen free; RoHS and REACH compliant

Typical Applications

• Waterproof and moisture proof potting of junction boxes and connectors
• Pressure sensor and precision sensor encapsulation with retained sensitivity
• PCB and circuit board conformal protection
• ECU, BMS and inverter module protection for new energy vehicles
• IGBT power module and power electronics encapsulation
• EV battery and battery cell potting
• LED display and lighting encapsulation
• Electronic modules operating in wide temperature and humidity ranges

Technical Data

OEM / ODM Customization & Bulk Supply

As a direct electronic silicone gel manufacturer we support OEM and ODM customization in hardness, viscosity, curing time and operating time. Wholesale and factory direct pricing, bulk 25kg drums, 50kg A+B kits and private label packaging are available for volume projects.

Packaging & Storage

Component A and Component B are each supplied in 25kg plastic barrels, or a 50kg A+B kit. Store in tightly sealed containers below 25°C, away from sunlight and moisture. Non-hazardous general chemicals for easy shipping and storage.

FAQ

Q1: What is the hardness of this electronic silicone gel?
A1: It is a Shore A 0-10 ultra soft gel that provides stress free protection for delicate electronic components.

Q2: What is the mix ratio and curing method?
A2: Mix Component A and B in a 1:1 ratio by weight. It cures at room temperature with a 120-180 minute pot life, or can be accelerated at 60-80°C.

Q3: Is this silicone gel waterproof and moisture proof?
A3: Yes, HN-6607 offers excellent waterproofing, moisture proofing and sealing performance for junction boxes, PCB and outdoor electronics.

Q4: What are the dielectric strength and temperature range?
A4: Dielectric strength is 2.8-3.2 kV/mm and the cured gel performs from -60°C to 200°C over a wide humidity range.

Q5: Do you support OEM customization and bulk supply?
A5: Yes, we are a direct manufacturer offering OEM / ODM customization in hardness, viscosity and cure time, plus bulk 25kg drums and 50kg kits.