บ้าน > สินค้า >
กีลซิลิโคนอิเล็กทรอนิกส์
>
Shenzhen Potting Compound Factory 1:1 Low Viscosity RTV Silicone Potting Compound for IGBT Power Module

Shenzhen Potting Compound Factory 1:1 Low Viscosity RTV Silicone Potting Compound for IGBT Power Module

รายละเอียดผลิตภัณฑ์:
สถานที่กำเนิด: เซินเจิ้น กวางตุ้ง จีน
ชื่อแบรนด์: HANAST
ได้รับการรับรอง: RoHS, REACH, UL94 V-0, SDS available
หมายเลขรุ่น: HN-8806 เอ/บี
ข้อมูลรายละเอียด
สถานที่กำเนิด:
เซินเจิ้น กวางตุ้ง จีน
ชื่อแบรนด์:
HANAST
ได้รับการรับรอง:
RoHS, REACH, UL94 V-0, SDS available
หมายเลขรุ่น:
HN-8806 เอ/บี
แบบอย่าง:
HN-8806 เอ/บี
พิมพ์:
สารประกอบเติมซิลิโคนนำความร้อนแบบเติมองค์ประกอบสองส่วน (RTV)
อัตราส่วนผสม:
1: 1 โดยน้ำหนัก
ชีวิตหม้อ:
18-24 นาที ที่อุณหภูมิ 25 องศาเซลเซียส
ตารางการรักษา:
อุณหภูมิห้อง 2-3 ชั่วโมง (เบื้องต้น) 80 C เร่ง 12 นาที
ลักษณะที่ปรากฏ (ก่อนผสม):
ส่วนประกอบ A ของเหลวสีขาว / ส่วนประกอบ B ของเหลวสีเทา
ลักษณะที่ปรากฏ (หายขาด):
อีลาสโตเมอร์สีเทา
ความหนืด:
2000-3000 mPa.s ที่ 25 C
ความหนาแน่น:
1.60 +/- 0.05 ก./ซม.3
ความแข็ง:
ฝั่ง A 45 +/- 5
การนำความร้อน:
>=0.76 วัตต์/มิลลิเคล
ความต้านทานต่อปริมาตร:
1.0 x 10^16 โอห์ม.ซม
ความเป็นฉนวน:
25-30 กิโลโวลต์/มม
สารหน่วงไฟ:
UL94 V-0
อุณหภูมิในการทำงาน:
-50 องศาเซลเซียส ถึง 250 องศาเซลเซียส
ที่ตั้งโรงงาน:
เซินเจิ้น กวางตุ้ง จีน
แอปพลิเคชัน:
โมดูลพลังงาน IGBT, กองชาร์จ EV, ชุดแบตเตอรี่, หม้อแปลงไฟฟ้าแรงสูง
การปฏิบัติตาม:
RoHS เข้าถึง; มีเอกสารข้อมูลความปลอดภัย
การจำแนกประเภทความปลอดภัย:
ไม่เป็นอันตราย (สารเคมีทั่วไป)
บรรจุภัณฑ์:
50กก./ชุด (25กก. A + 25กก. B)
อายุการเก็บรักษา:
6 เดือน
เน้น:

High Light

เน้น:

1:1 Low Viscosity RTV Potting Compound

,

IGBT Power Module Encapsulant

,

EV Charging Pile Silicone Potting Gel

ข้อมูลการค้า
จำนวนสั่งซื้อขั้นต่ำ:
1 กก
รายละเอียดการบรรจุ:
50กก./ชุด (25กก.บาร์เรลA + 25กก.บาร์เรลB) ภาชนะปิดสนิทจัดส่งทางอากาศหรือทางทะเล
เวลาการส่งมอบ:
3-5 วันทำการสำหรับตัวอย่าง 7-15 วันสำหรับการสั่งซื้อจำนวนมาก
เงื่อนไขการชำระเงิน:
T/T, L/C, เวสเทิร์นยูเนี่ยน, เพย์พาล
สามารถในการผลิต:
120 ตันต่อเดือน
คําอธิบายสินค้า
HANAST HN-8806 A/B 1:1 Low Viscosity RTV Silicone Potting Compound for IGBT Power Module HN-8806 A/B is a two-component 1:1 RTV silicone potting compound developed for IGBT power module encapsulation and EV charging pile electronics protection. Produced by our Shenzhen potting compound factory in Guangdong, China, it flows readily for complete under-fill around IGBT modules and dense power assemblies, then cures at room temperature or by heating into a high-performance grey
เรตติ้งและรีวิว

คะแนนโดยรวม

5.0
อ้างอิงจาก 50 บทวิจารณ์สำหรับซัพพลายเออร์รายนี้

รูปฉบับการจัดอันดับ

ต่อไปนี้คือการกระจายการจัดอันดับทั้งหมด
5 ดาว
100%
4 ดาว
0%
3 ดาว
0%
2 ดาว
0%
1 ดาว
0%

รีวิวทั้งหมด

Our technical department speaks highly of this silicone gel for electronics,very suitable for our flow maters; we have collaborated three times already and will continue to work together in the future.

ผลิตภัณฑ์คล้ายกัน
10:1 Soft 25 Shore A Two Part China Silicone Potting Gel RT Cure for Solar Inverter Household Appliance วิดีโอ
Shenzhen Potting Compound Factory 10:1 RTV Silicone for Circuit Board Sealing Power Supply วิดีโอ
China Potting Compound Factory 10:1 Low Viscosity RTV Silicone Potting Compound for Sensor Automotive วิดีโอ
China Potting Compound Factory HN-8806AB 1:1 Thermal Conductive RTV Silicone Potting Compound for 5G Base Station วิดีโอ
Guangdong Potting Compound Factory 1:1 Waterproof Silicone Electronic Potting Gel for Solar Inverter BESS วิดีโอ
China Potting Compound Factory 1:1 UL94 V-0 Flame Retardant RTV Silicone Potting Compound for LED Driver วิดีโอ