家へ > 製品 >

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

Name: 100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold
Brand: Shenzhen Hanast New Material co.,LTD
SKU: HN-620
Availability: InStock

製品の詳細:

起源の場所:	広東省、中国
ブランド名:	Hanast
証明:	MSDS
モデル番号:	HN-620

詳細情報

起源の場所:

広東省、中国

ブランド名:

Hanast

証明:

MSDS

モデル番号:

HN-620

名前:

錫硬化液状シリコーン

特徴:

優れた弾性と優れたシミュレーションパフォーマンス

学年:

産業用

MOQ:

1KG

応用:

金型製作

色:

半透明

特徴:

低収縮

粘度(mPa.s):

18000 ±2000

混合比:

100：2

ショア硬度:

0-60 ショアA

ハイライト:

High Light

ハイライト:

tin cured silicone rubber for molds

industrial grade liquid silicone

silicone rubber for plaster molds

取引情報

最小注文数量:

1キログラム

価格:

交渉可能

パッケージの詳細:

25kg/鉄タンブール

受渡し時間:

5～8営業日

支払条件:

T/T、ウェスタンユニオン

供給の能力:

200トン/週

製品説明

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

Description of Tin Cure Silicone Rubber

Tin Cure Silicone Rubber (also known as condensation-cure silicone) is a two-component, room-temperature vulcanizing (RTV-2) silicone rubber that uses a tin-based catalyst to cure. It is the global industry standard for general mold making due to its high flexibility, cost-effectiveness, and ease of use.

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold 0

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold 1

Technical parameter of Tin Cure Silicone Rubber

Model	HN-620AB
Feature	high tear resistance
Viscosity (cs)	170000
Gravity ( G/cm 3 )	1.06
Hardness(A°)	20
Strength( MPa)	3.1-3.6
Tear Strength (kN/m )	19.8-24.3
Elongation(%)	600-720
Linear Shrinkage(%)	≤0.2
Curing Agent Addition Ratio(%)	2-3%
Operating Time( mins )	30-40
Curing Time( hours )	3-4

Feature of Tin Cure Silicone Rubber:

High Tear Strength: It is extremely stretchy and resistant to tearing, making it perfect for molds with deep undercuts.
Excellent Release Properties: It naturally repels most materials, meaning you rarely need to use chemical mold release agents.
Low Inhibition Risk: It is highly forgiving. Unlike platinum silicone, tin cure silicone will cure over almost any surface (clay, wood, 3D prints, plaster) without chemical failure.
Shrinkage Over Time: It shrinks slightly (typically 0.2% to 1%) during the curing process and continues to shrink very slowly over years.
Limited Lifespan: Tin cure molds degrade faster over time (usually within a few years) and will eventually become brittle.
Application of tin cured silicone rubber
Replicating plaster, concrete elements, cornices, and stone veneers.
Ideal for high-volume candle and soap production due to its low cost and high flexibility.
Making molds for production casting of polyurethane, epoxy, and polyester resins

Master Prep ➔ Build Mold Box ➔ Secure Master ➔ Weigh & Mix ➔ Vacuum Degas ➔ Pour ➔ Cure ➔ Demold ➔ Ready to Cast!

タグ:

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

High Light

ハイライト:

tin cured silicone rubber for molds

industrial grade liquid silicone

silicone rubber for plaster molds

シリコン,

LSR シリコン,

模具用シリコン液体

MSDS RTV シロチェスト液体シリコーンゴム型取り用 1KG

大量 RTV 2 シリコンゴム液体

20kg モメント性透明液体シリコンゴム RTV-2 FDA承認

2 部 RTV2 チンキュアシリコンゴム流体塗布ブラッシング注射鋳造

低収縮性チンの固化液体シリコン注射鋳造ゴム工芸品製造 HN-620 A/B

100工業用モメンティブティンキュアシリコンゴム PU樹脂カビのための液体ゴム

RTV2 シリコンゴム半透明液体鋳造模具製造用 200kg