집 > 상품 >

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

Name: 100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold
Brand: Shenzhen Hanast New Material co.,LTD
SKU: HN-620
Availability: InStock

제품 세부 사항:

원래 장소:	중국 광둥
브랜드 이름:	Hanast
인증:	MSDS
모델 번호:	HN-620

자세한 정보

원래 장소:

중국 광둥

브랜드 이름:

Hanast

인증:

MSDS

모델 번호:

HN-620

이름:

주석 경화 액체 실리콘

특징:

좋은 탄력성과 좋은 시뮬레이션 성능

등급:

산업용

MOQ:

1KG

애플리케이션:

금형 제작

색상:

반투명

특징:

낮은 수축

점도(mPa.s):

18000 ± 2000

혼합비율:

100 : 2

해안 경도:

0-60 해안 A

강조하다:

High Light

강조하다:

tin cured silicone rubber for molds

industrial grade liquid silicone

silicone rubber for plaster molds

거래 정보

최소 주문 수량:

1 킬로그램

가격:

협상 가능

포장 세부 사항:

25kg/철드럼

배달 시간:

5-8 근무일

지불 조건:

T/T, 서부 동맹

공급 능력:

200tons/주

제품 설명

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

Description of Tin Cure Silicone Rubber

Tin Cure Silicone Rubber (also known as condensation-cure silicone) is a two-component, room-temperature vulcanizing (RTV-2) silicone rubber that uses a tin-based catalyst to cure. It is the global industry standard for general mold making due to its high flexibility, cost-effectiveness, and ease of use.

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold 0

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold 1

Technical parameter of Tin Cure Silicone Rubber

Model	HN-620AB
Feature	high tear resistance
Viscosity (cs)	170000
Gravity ( G/cm 3 )	1.06
Hardness(A°)	20
Strength( MPa)	3.1-3.6
Tear Strength (kN/m )	19.8-24.3
Elongation(%)	600-720
Linear Shrinkage(%)	≤0.2
Curing Agent Addition Ratio(%)	2-3%
Operating Time( mins )	30-40
Curing Time( hours )	3-4

Feature of Tin Cure Silicone Rubber:

High Tear Strength: It is extremely stretchy and resistant to tearing, making it perfect for molds with deep undercuts.
Excellent Release Properties: It naturally repels most materials, meaning you rarely need to use chemical mold release agents.
Low Inhibition Risk: It is highly forgiving. Unlike platinum silicone, tin cure silicone will cure over almost any surface (clay, wood, 3D prints, plaster) without chemical failure.
Shrinkage Over Time: It shrinks slightly (typically 0.2% to 1%) during the curing process and continues to shrink very slowly over years.
Limited Lifespan: Tin cure molds degrade faster over time (usually within a few years) and will eventually become brittle.
Application of tin cured silicone rubber
Replicating plaster, concrete elements, cornices, and stone veneers.
Ideal for high-volume candle and soap production due to its low cost and high flexibility.
Making molds for production casting of polyurethane, epoxy, and polyester resins

Master Prep ➔ Build Mold Box ➔ Secure Master ➔ Weigh & Mix ➔ Vacuum Degas ➔ Pour ➔ Cure ➔ Demold ➔ Ready to Cast!

태그:

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

High Light

강조하다:

tin cured silicone rubber for molds

industrial grade liquid silicone

silicone rubber for plaster molds

진료 실리콘,

LSR 실리콘,

곰팡이용 실리콘 액체

MSDS RTV 실로체스트 액체 실리콘 고무

대량 RTV 2 주석 경화 실리콘 고무 액체 석고 몰드용

20kg 모멘티브 투명 액체 실리콘 고무 RTV-2 FDA 승인

주입, 붓기, 주입 성형에 사용되는 2액형 RTV2 주석 경화 실리콘 고무 액체

저수축 주석 경화 액상 실리콘 사출 성형 고무 공예 제작 HN-620 A/B

100:2 산업용 Momentive 주석 경화 실리콘 고무 액체 고무 (PU 수지 몰드용)

RTV2 주석 경화 LSR 실리콘 고무 반투명 액체 주조 금형 제작용 200kg