Zu Hause > produits >

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

Name: 100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold
Brand: Shenzhen Hanast New Material co.,LTD
SKU: HN-620
Availability: InStock

Produktdetails:

Herkunftsort:	Guangdong, China
Markenname:	Hanast
Zertifizierung:	MSDS
Modellnummer:	HN-620

Einzelheiten

Herkunftsort:

Guangdong, China

Markenname:

Hanast

Zertifizierung:

MSDS

Modellnummer:

HN-620

Name:

Zinnhärtendes flüssiges Silikon

Besonderheit:

gute Elastizität und gute Simulationsleistung

Grad:

Industriell

Mindestbestellmenge:

1 kg

Anwendung:

Formenbau

Farbe:

Halbtransparent

Merkmale:

niedriger Schrumpfung

Viskosität (mPa.s):

18000 ± 2000

Mischungsverhältnis:

100: 2

Shore-Härte:

0-60 Shore A

Hervorheben:

High Light

Hervorheben:

tin cured silicone rubber for molds

industrial grade liquid silicone

silicone rubber for plaster molds

Handelsinformationen

Min Bestellmenge:

1 Kilogramm

Preis:

Verhandlungsfähig

Verpackung Informationen:

25 kg/Eisentrommel

Lieferzeit:

5-8 Werktage

Zahlungsbedingungen:

T/T, Western Union

Versorgungsmaterial-Fähigkeit:

200 t/Woche

Beschreibung des Produkts

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

Description of Tin Cure Silicone Rubber

Tin Cure Silicone Rubber (also known as condensation-cure silicone) is a two-component, room-temperature vulcanizing (RTV-2) silicone rubber that uses a tin-based catalyst to cure. It is the global industry standard for general mold making due to its high flexibility, cost-effectiveness, and ease of use.

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold 0

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold 1

Technical parameter of Tin Cure Silicone Rubber

Model	HN-620AB
Feature	high tear resistance
Viscosity (cs)	170000
Gravity ( G/cm 3 )	1.06
Hardness(A°)	20
Strength( MPa)	3.1-3.6
Tear Strength (kN/m )	19.8-24.3
Elongation(%)	600-720
Linear Shrinkage(%)	≤0.2
Curing Agent Addition Ratio(%)	2-3%
Operating Time( mins )	30-40
Curing Time( hours )	3-4

Feature of Tin Cure Silicone Rubber:

High Tear Strength: It is extremely stretchy and resistant to tearing, making it perfect for molds with deep undercuts.
Excellent Release Properties: It naturally repels most materials, meaning you rarely need to use chemical mold release agents.
Low Inhibition Risk: It is highly forgiving. Unlike platinum silicone, tin cure silicone will cure over almost any surface (clay, wood, 3D prints, plaster) without chemical failure.
Shrinkage Over Time: It shrinks slightly (typically 0.2% to 1%) during the curing process and continues to shrink very slowly over years.
Limited Lifespan: Tin cure molds degrade faster over time (usually within a few years) and will eventually become brittle.
Application of tin cured silicone rubber
Replicating plaster, concrete elements, cornices, and stone veneers.
Ideal for high-volume candle and soap production due to its low cost and high flexibility.
Making molds for production casting of polyurethane, epoxy, and polyester resins

Master Prep ➔ Build Mold Box ➔ Secure Master ➔ Weigh & Mix ➔ Vacuum Degas ➔ Pour ➔ Cure ➔ Demold ➔ Ready to Cast!

Tags:

100:2 Tin Cured Silicone Rubber condensed Industrial Grade Liquid Silicone For Plaster Mold

High Light

Hervorheben:

tin cured silicone rubber for molds

industrial grade liquid silicone

silicone rubber for plaster molds

Silikon mit Zinngehalt,

LSR Silizium,

Silikonflüssigkeit für Formen

MSDS RTV Siloczest Flüssiges Silikonkautschuk zur Herstellung von 1 kg

Silikonkautschuk, flüssig, für Gips- und Stuckformen (Zinn-Vernetzung)

20 kg Momentive Liquid Transparent Silicone Gummi RTV-2 FDA zugelassen

Zweiteiliger RTV2 Zinn-Silikonkautschuk Flüssigkeit zum Gießen, Bürsten und Spritzgießen

Niedrigschrumpfbare Zinnkurflüssigkeit Silikon Spritzgießerei Kautschukhandwerk Herstellung HN-620 A/B

1002 Industrielle Momentive Tin Cure Silikonkautschuk Flüssigkautschuk für PU-Harz-Formen

RTV2 Zinngehärtetes LSR Silikonkautschuk Halbtransparent Flüssigguss für die Formherstellung 200kg