logo
Huis > producten >
Silicone-pottenverbinding
>
Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1

Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1

Productdetails:
Plaats van herkomst: Guangdong, China
Merknaam: Hanast
Certificering: ROHS
Modelnummer: HN-8820
Gedetailleerde informatie
Plaats van herkomst:
Guangdong, China
Merknaam:
Hanast
Certificering:
ROHS
Modelnummer:
HN-8820
Naam:
Silicone-pottenverbinding voor elektronica
Mengverhouding:
1:1
Kleur:
Grijs, wit, zwart
Functies:
2.0 thermische geleidbaarheid
MOQ:
1 tot 2 kg
Brede Temperatuurwaaier:
-50°C tot 250°C
Hardheid:
50±5 Strand A
Sollicitatie:
Nieuwe energievoertuigbatterijen en thermische beheersystemen
Houdbaarheidstijd:
6 maanden
Cusomization:
Steun
Handelsinformatie
Min. bestelaantal:
1KG
Prijs:
Onderhandelbaar
Verpakking Details:
50KG/set, 25KG/bar
Levertijd:
5-7 dagen
Betalingscondities:
T/T, PayPal
Levering vermogen:
100ton/maand
Productbeschrijving

Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1

 

 
Product Overview for silicone potting compound:
High-conductivity potting compound is a two-component, thermally conductive silicone potting material. Utilizing an addition-curing silicone rubber system, it consists of two components—A and B—which, after being mixed in a 1:1 ratio, cure at room or moderate temperatures. The curing process generates no low-molecular-weight byproducts and exhibits low shrinkage. Its thermal conductivity can reach up to 3.0 W/m·K.
 
 

Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1 0
 
Technical Parameters for silicone potting compound:

Exterior:grey liquid
viscosity:2000-3000cps
hardness:45-50shore A
thermal conducitivity:2.0(W/M▪K)
Flame retardant rating (V) (UL94):V-0
Wide temperature range (-40℃-150℃)
 

Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1 1
 
Product Applications for silicone potting compound:

5G Communications, Microinverters, and Precision Electronics; Third-Generation Semiconductors and Power Module Packaging; New Energy Vehicle Power Batteries and Thermal Management Systems

Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1 2
 
 
 
 
How to use silicone potting compound:

  • Weigh & Stir: Accurately weigh components A and B in a 1:1 ratio. Stir each part thoroughly before mixing to disperse any settled fillers and ensure consistent performance.
  • Mix Thoroughly: Blend the two parts (by hand or machine) until the color is completely uniform. Tip: If mixing manually, work in small batches so the glue stays fluid and easy to pour.
  • Degas: Place the mixed glue into a vacuum chamber to completely remove any trapped air bubbles. [1]
  • Pot: Pour the bubble-free glue into your device. Tip: Ensure your device and mixing containers are completely clean and dry before starting.

Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1 3