This two-component soft silicone potting compound is engineered for the stress-free protection of sensitive PCB boards. With a 10:1 mix ratio, a long 40–60 minute pot life and room-temperature curing, it delivers a forgiving, easy-to-control process for prototypes, high-mix low-volume runs and precision modules. Cured at 30–40 Shore A, the elastic, reworkable and repairable encapsulant cushions components against vibration and thermal stress while allowing clean peel-off and removal during maintenance.
![]()
![]()
| Item | Value |
|---|---|
| Model | HN-8808A/B |
| Type | Two-component soft silicone potting compound |
| Mix Ratio | 10:1 (A:B) |
| Pot Life (25°C) | 40–60 minutes |
| Mixed Viscosity | 2000–2600 cP |
| Hardness | 30–40 Shore A |
| Curing Condition | Room temperature cure |
| Color | Transparent / Customizable |
| Shelf Life | 6 months (unopened, cool & dry storage) |
![]()
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
![]()
22 KG/set (20 KG A + 2 KG B); 11 KG/set (10 KG A + 1 KG B). Delivery within 5–7 days. Payment by T/T or PayPal.
Q1: What is HN-8808 A/B and what is it used for?
A1: HN-8808 A/B is a two-component condensation-cure (RTV-2) transparent silicone potting compound. Mixed at 10:1 by weight, it cures at room temperature into a soft, transparent elastomer for potting protection of PCBs, LED power supplies, waterproof power supplies and automotive electronic modules.
Q2: What are the mix ratio, pot life and curing schedule?
A2: Mix Component A and Component B at a 10:1 ratio by weight. Pot life is 40–60 minutes at 25°C; it cures at room temperature, achieving initial set and then complete cure in 8–24 hours. After initial cure, gentle heating not exceeding 60°C may be used to accelerate curing.
Q3: What are the key performance properties of HN-8808 A/B?
A3: It cures to a transparent elastomer with good adhesion to substrates (especially aluminium), is non-corrosive with small chemical shrinkage and no exotherm, and offers dielectric strength ≥14 kV/mm, dielectric constant ≤3.0, elongation ≤100% and an operating temperature range of −50°C to 200°C, with waterproof and moisture-proof protection.
Q4: What should be noted during mixing and curing?
A4: After mixing, vacuum-degas the compound to remove entrapped air. Do not completely seal the potted device or heat it above 100°C before the curing mass is fully released; if complete sealing is required, wait 3 days (summer) or 7 days (winter). Also, the 10:1 mixed compound must not be heated to accelerate curing immediately after mixing — gentle heating (not exceeding 60°C) is only allowed after initial cure.
Q5: How is it packaged and what is the shelf life?
A5: It is supplied as 22 kg/set (20 kg A + 2 kg B) or 11 kg/set (10 kg A + 1 kg B). Store sealed in a cool, dry place below 25°C; shelf life is 6 months unopened (best used within 3 months). Reseal immediately after opening to avoid moisture contamination. It is classified as non-dangerous goods for transport.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews