|
| Nguồn gốc: | Quảng Đông, Trung Quốc |
| Hàng hiệu: | Hanast |
| Chứng nhận: | ROHS |
| Số mô hình: | HN-8808A/B |
Product Overview for Silicone Potting Compound:
HN-8808 series potting compounds satisfy rigorous reliability standards for automotive electronics. Featuring superior elastic performance, they efficiently buffer mechanical vibration and impact loads. With a broad service temperature window ranging from -50°C to 200°C, the material maintains consistent performance under harsh under-hood conditions. Formulated to shield automotive electronic modules against moisture, chemical corrosion, thermal cycling and continuous vibration, this compound enables assemblies to pass full automotive-grade reliability validation tests.
Key Performance Parameters for Silicone Potting Compound:
|
Appearance (Mixed) |
Transparent/Black/White Elastomer (select as needed) |
|
Mix Ratio (A:B) |
10 : 1 (by weight) |
|
Pot Life (25°C) |
40-60 minutes |
|
Cure Time (25°C) |
4-6 hours (tack-free), 24 hours (full cure) |
|
Hardness (Shore A) |
30-40 (GB/T531-1999) |
|
Volume Resistivity |
≥5.0×10¹⁴ Ω·cm (GB/T 31838.2-2019) |
|
Thermal Conductivity |
0.3-0.5 W/M·K (depending on color, GB/T 38712-2020) |
|
Dielectric Strength |
≥14 kV/mm |
Product Highlightsfor Silicone Potting Compound:
* Exceptional Environmental Resilience: Resistant to thermal shock, high temperature/humidity, with stable performance under extremes.
* Excellent Chemical Resistance: Good resistance to automotive oils, brake fluids, coolants, etc.
* Effective Stress Relief: Low hardness and high elasticity absorb stress between PCB and housing, protecting delicate components.
* Long-Term Durability: Superior anti-aging properties ensure continuous protection throughout the vehicle's lifecycle.
* Compliant with Environmental Standards: Products comply with directives like RoHS, meeting automotive industry environmental requirements.
Application Areas for Silicone Potting Compound:
* Engine Control Units (ECU)
* Battery Management Systems (BMS), Onboard Chargers (OBC)
* Sensors (e.g., pressure, position sensors)
* Light controllers, wiper controllers
* Infotainment systems & dashboards
Detailed Operating Guide for Silicone Potting Compound:
1. Pre-Production Process Verification
Full process verification prior to mass manufacturing is highly advised to verify compatibility with base materials including epoxy PCBs and polyurethane enameled wires.
2. Accurate Metering & Homogeneous Mixing
Dual-fluid dispensing machines paired with static mixing nozzles are recommended. Precise proportioning and complete blending are essential to guarantee long-term automotive-grade reliability.
3. Mandatory Vacuum Defoaming
Vacuum degassing must be carried out to avoid partial discharge risks and elevated thermal resistance caused by trapped air bubbles.
4. Clean & Climate-Controlled Potting Workshop
Carry out potting operations within a dust-free space with stable temperature and humidity to reduce contamination of electronic components.
5. Standard Curing & Full Post-Curing Cycle
Wait a minimum of 24 hours at room temperature post potting before conducting electrical performance tests. Complete assembly sealing and strict environmental reliability tests after full 7-day curing.
Packaging & Storage for Silicone Potting Compound:
Two standard package sizes are offered
11kg complete set (10kg Component A + 1kg Component B)
22kg complete set (20kg Component A + 2kg Component B).
200kg steel drums are optional for large-scale mass production.
Băng hình
Băng hình
Băng hình
Băng hình
Băng hình
Băng hình
Băng hình
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
