HN100 Thermal Compound Paste is a single-component, non-curing insulating silicone compound rated 1.0 W/m·K. It almost never solidifies, keeps its paste state from −40 °C to +180 °C, and combines reliable electrical insulation with stable heat transfer for CPUs, GPUs, power modules and LED assemblies.
1.0 W/mKThermal conductivity
1.85 g/cm³Density
−40~+180 °COperating range
≤0.6%Volatile matter
Product Description
HN100 is a high thermal conductivity, electrically insulating organic silicone material that almost never solidifies and remains in a paste-like state for long-term use at temperatures from −40 °C to +180 °C. It offers excellent electrical insulation together with outstanding thermal conductivity, a very low impurity level tending towards zero, and resistance to high and low temperatures, water, ozone and climate ageing.
Because the paste does not cure, thermal contact stays stable through repeated heat cycles and components can be disassembled and re-applied without scraping. The compound is safe, non-toxic, odourless and non-corrosive, and is supplied in 1 kg cans or 5 kg barrels.
Why Choose HN100
- Non-curing stability: keeps its paste consistency indefinitely, so thermal performance does not degrade over time.
- Insulation plus conduction: excellent dielectric behaviour together with 1.0 W/m·K conductivity for general electronics cooling.
- Ultra-low impurity level: near-zero ion content protects sensitive circuits and long-life assemblies.
- Environmental resistance: water, ozone and climate ageing resistance for outdoor and automotive use.
- Easy application: suitable for brushing, stencil printing, screen printing and automatic dispensing.
- Full technical support: TDS, MSDS and formula customisation provided.
Model Selection Guide
| Model | Appearance | Thermal Conductivity (W/m·K) | Density (g/cm³) | Oil Separation (200 °C / 24 h) | Volatile Matter (200 °C / 24 h) |
| HN100 | White / grey paste | 1.0 | 1.85 ± 0.08 | ≤0.3% | ≤0.6% |
| HN150 | White / grey paste | 1.5 | 2.77 ± 0.08 | ≤0.4% | ≤0.8% |
| HN250 | Grey paste | 2.5 | 3.1 ± 0.08 | ≤0.5% | ≤0.8% |
| HN300 | Shiny, smooth grey paste | 3.0 | 2.5 ± 0.08 | ≤0.3% | ≤0.7% |
All grades are single-component, non-curing and rated −40 °C to +180 °C. Other conductivities and packaging can be customised on request.
Typical Applications
- Transistors, CPU assemblies, thermistors and temperature sensors
- Automotive electronic components and automotive refrigerators
- Power modules, power templates and printer heads
- LED lamp heat dissipation interfaces and electrical components
- General heat transfer interfaces in electronic and electrical equipment
Application Instructions
- Surface preparation: clean contact surfaces with solvent to remove grease, dust and oxidation; dry completely.
- Application: apply by brushing, rolling, screen printing or automatic dispensing.
- Spreading: transfer a small amount with a clean tool and spread evenly to the target thickness.
- Thickness control: thinner layers transfer heat better; wipe excess from edges with a lint-free cloth.
- Assembly: mount the heat sink immediately and torque fasteners to specification.
Packaging and Storage
- Standard packing: 1 kg can and 5 kg barrel; custom packaging on request
- Store sealed below 27 °C in a cool, dry, ventilated area, protected from direct sunlight
- Shelf life: 12 months from date of manufacture
Technical Service
- Complete product technical documentation, TDS and MSDS provided with every shipment
- Formula adjustment to match customer-specific performance requirements
- Application support for dispensing, stencil printing and automated lines
- Sample evaluation before volume orders and custom packaging on request
Frequently Asked Questions
What is the thermal conductivity of HN100?1.0 W/m·K, measured under standard laboratory conditions.
Does HN100 cure or harden?No. It is a non-curing silicone compound that stays paste-like throughout its service life and can be reworked.
What is the operating temperature range?−40 °C to +180 °C, with resistance to high and low temperature, water, ozone and climate ageing.
Which other grades are available?HN100 (1.0), HN150 (1.5), HN250 (2.5) and HN300 (3.0 W/m·K); custom values can be developed on request.
How is it packaged?1 kg can and 5 kg barrel as standard; larger and custom packaging available on request.
What is the shelf life?12 months from date of manufacture when stored sealed below 27 °C, away from direct sunlight.
Product Gallery
Need an HN100 sample or bulk quotation?
Tell us your application, heat load and packaging requirement. We reply with a matched grade, TDS and MSDS within one working day.