| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance | Visual inspection | - | Grey, glossy, fine paste |
| Thermal Conductivity | ASTM D5470 | W/mK | 4.05 +/- 0.1 |
| Specific Gravity | GB/T 13354-1992 / 25 C | g/cm3 | 2.61 +/- 0.08 |
| Oil Separation | SH/T 0324-1992 / 200 C, 24 h | % | <= 0.3 |
| Volatile Matter | SH/T 0337-92 / 200 C, 24 h | % | <= 0.7 |
| Penetration | GB/T 269-2023 / 25 C | 1/10 mm | 240 +/- 20 |
| Breakdown Voltage | IEC 60243 / 0.20 mm | V/mm | 1100 |
| Operating Temperature | Service range | C | -50 to +200 |
| Cure Behaviour | Single component | - | Non-curing, stays paste |
| RoHS | RoHS 2.0 | - | Compliant |
Values are typical laboratory data. Real thermal performance depends on bond line thickness (BLT), contact pressure, surface flatness and the flatness of the cold plate or heat sink in your own assembly.
Calculated interface resistance R = BLT / k for HN400 at k = 4.05 W/mK. Use it to compare a paste against a pad of the same thickness and to set a dispensing target for your line.
| Bond line thickness | Interface resistance (C cm2/W) | Typical use on EV line |
|---|---|---|
| 0.02 mm (20 um) | 0.049 | Polished cold plate, high clamp pressure, automatic dispensing |
| 0.05 mm (50 um) | 0.123 | Battery module cold plate, IGBT module base plate |
| 0.10 mm (100 um) | 0.247 | Aluminium housing with moderate flatness |
| 0.15 mm (150 um) | 0.370 | Rough casting surface, use gap pad instead if thicker than 0.2 mm |
| Assembly stage | Where HN400 is applied (English search terms) |
|---|---|
| Battery pack and module | battery pack thermal interface, battery module cold plate, prismatic cell module, cylindrical cell module, pouch cell module, module housing, pack tray, liquid cooling plate, cold plate, busbar heat path, BMS heat sink (non-live surface), thermal runaway barrier interface, module end plate |
| Power electronics | IGBT module, SiC module, power module base plate, traction inverter, motor controller, MCU housing, OBC on-board charger, DC-DC converter, PDU, fuse box heat sink, DC busbar, capacitor bank heat sink, gate driver heat spreader |
| Motor and drivetrain | traction motor housing, stator outer ring, e-axle housing, gearbox housing rib, motor end cap, resolver cover (non-live), oil cooler interface |
| Charging infrastructure | DC fast charger power stack, AC wallbox heat sink, charging pile module, EVSE power board heat sink, charging connector shell |
| Production and service | heat sink assembly, press-fit fixture, spring clamp interface, screw torque controlled assembly, rework and re-seating, thermal pad replacement, gap pad alternative for thin gaps, dispensing line start-up, incoming inspection sample |
| Role | What they actually ask | How HN400 answers it |
|---|---|---|
| Factory owner / plant director | Will this paste stop my line, and is the supplier stable for the next two years? | Non-curing paste with 12-month shelf life below 27 C, 20 t/month capacity, one model used across battery, OBC and inverter stations. |
| Purchasing manager | What is the landed cost per module, and does it ship as dangerous goods? | Non-dangerous goods classification avoids DG surcharges and special handling; 1 kg trial drum and 5 kg production drum limit dead stock; quote on request without price list. |
| Process engineer | Can my dispenser handle it, and what BLT do I set? | Penetration 240 +/- 20 (1/10 mm) supports brushing, roller, screen printing and automatic dispensing; target BLT 0.02-0.10 mm with torque-controlled fasteners. |
| Project manager | How fast can we validate and ramp a new CKD line? | TDS, SDS, batch COA and RoHS 2.0 declaration are ready for line trial; stock shipments in 3-7 working days let a trial run start before the PPAP style document set is complete. |
| Product manager | Does this fit our platform plan across models? | One 4.05 W/mK grade covers battery cold plate, power module and inverter interfaces, which reduces part numbers across vehicle platforms. |
| Model | Thermal conductivity | Positioning | Typical interface |
|---|---|---|---|
| HN100 | 1.0 W/mK | Insulating, high breakdown voltage | Power supply, inductor, PTC heater, transformer |
| HN400 | 4.05 W/mK | High conductivity, non-curing, dispensing friendly | EV battery cold plate, power module, OBC, inverter |
| HN500 | 5.05 W/mK | Metal-filled, liquid metal alternative | GPU and AI server, high power density module |
About this supplier
Shenzhen Hanast New Materials Co., Ltd. is a China-based source factory for RTV-2 liquid silicone, potting compounds and thermal interface materials. Established in 2010 with a 40,000 m² production base, the company is an export-driven manufacturer with 70 to 80 percent of its business overseas, supplying B2B clients with OEM and ODM encapsulation and thermal management solutions.
Our range covers thermal grease from 1.0 to 6.0 W/m·K, thermally conductive potting compounds, silicone gels, mould making rubber and food grade silicone. Because the thermal grease and the potting compound for the same assembly come from one factory, your engineering team works with one technical contact and your purchasing team consolidates one supplier, one documentation set and one shipment schedule.
![]()