Home > Products >
Thermal Grease Paste
>
4.0 W/mK Non-Curing Thermal Grease Paste for Southeast Asia EV Charger SiC Module Assembly

4.0 W/mK Non-Curing Thermal Grease Paste for Southeast Asia EV Charger SiC Module Assembly

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0, REACH, ISO 9001:2015
Model Number: HN400
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0, REACH, ISO 9001:2015
Model Number:
HN400
Thermal Conductivity:
4.05 ± 0.1 W/m·K (ASTM D5470)
Operating Temperature:
-50 To +200 °C
Penetration:
240 ± 20 (1/10 Mm) At 25 °C
Specific Gravity:
2.61 ± 0.08 G/cm³ At 25 °C
Breakdown Voltage:
1100 V/mm At 0.20 Mm
Oil Separation:
≤ 0.3% At 200 °C / 24 H
Highlight:

High Light

Highlight:

Southeast Asia Factory Direct Thermal Grease

,

SiC Module Low BLT Interface Paste

,

Silicone Oil Migration Controlled Paste

Trading Information
Minimum Order Quantity:
1 Kilogram (1 kg / 5 kg plastic drums)
Packaging Details:
1 kg and 5 kg plastic drums with TDS, MSDS and COA inside; palletised export packing; syringe, cartridge and private label packaging on request
Delivery Time:
3-5 working days for stock drums, 7-15 days for custom formulation and private label orders
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
HN400 Thermal Conductive Silicone Grease for Southeast Asia Assembly Lines

HN400 is a single-component, non-curing thermal conductive silicone grease formulated with low thermal resistance fillers. Thermal conductivity is 4.05 ± 0.1 W/m·K (ASTM D5470), roughly double that of standard 1.0 to 2.0 W/m·K paste. It is a grey, glossy, fine paste with good spreadability that pulls heat off power devices quickly, and it holds that performance from -50 °C to +200 °C without curing, hardening or drying out.

This grade is built for B2B factories that assemble in volume and ship across borders. It suits EV charger and onboard charger (OBC) production, SiC and IGBT power modules, battery modules and energy storage cabinets, PV inverters, telecom power, LED drivers and home appliance control boards. Because it never cures, heat sinks and modules can be re-seated, reworked or repaired on the line without cleaning and re-pasting, which protects yield during ramp-up and after field returns.

For Southeast Asian buyers in Vietnam, Thailand, Indonesia, Malaysia and the Philippines, HN400 is supplied as non-dangerous goods in 1 kg and 5 kg plastic drums with TDS, MSDS and a COA for every lot, so import clearance, warehouse storage and supplier audits stay simple even in hot and humid coastal climates.

HN400 thermal conductive silicone grease grey paste One Material, Five Stakeholders

Thermal interface decisions are rarely made by one person. HN400 is documented so that every function in your organisation can approve it from their own angle.

Factory owner / general manager

Stable yield and predictable cost per unit: a non-curing paste eliminates the dry-out and re-paste failures of curing adhesives, cuts rework on the assembly line, and comes from a single source factory with 50 tons per month of capacity for grease and potting compounds.

Purchasing manager

Clear commercial terms without surprises: minimum order from 1 kg, 3 to 5 working days for stock drums, COA per lot, TDS and MSDS for customs, non-dangerous goods classification (no DG surcharge or special container), and private label drums for your own brand.

Thermal / process engineer

Real numbers to design around: 4.05 ± 0.1 W/m·K, 240 ± 20 (1/10 mm) penetration for controlled bond line thickness, oil separation ≤ 0.3% and volatiles ≤ 0.7% at 200 °C / 24 h to limit pump-out, and compatibility with brushing, rolling, stencil and screen printing, syringe, cartridge and automatic dispensing.

Project manager (NPI)

Fast path from sample to production: 1 kg trial drums for the first build, 7 to 15 days for custom formulation or private label runs, and direct access to our Shenzhen application engineers for BLT, dispensing and reliability questions during qualification.

Product manager

A platform instead of a single SKU: the same chemistry family runs from 1.0 to 6.0 W/m·K, with adjustable viscosity, colour and packaging, so one approved supplier can cover several product generations and OEM or ODM programmes.

B2B Selling Points
  • 4.05 ± 0.1 W/m·K thermal conductivity (ASTM D5470) with low thermal resistance fillers, for high heat flux dies, SiC and IGBT modules and dense power stages.
  • Non-curing, permanently paste-like: no hardening, no dry-out, full rework and field repair capability, and repeatable re-seating of heat sinks.
  • -50 °C to +200 °C operating range: covers cold-room start-up, outdoor cabinets in tropical sun and continuous high duty power cycling.
  • Low oil separation ≤ 0.3% and low volatility ≤ 0.7% at 200 °C / 24 h: controlled silicone oil migration keeps nearby contacts, connectors and PCB surfaces clean and reduces pump-out on vertical interfaces.
  • Near-zero free radical content: resists oxidation, embrittlement, water, ozone and weathering, which matters in humid coastal plants and outdoor telecom or PV installations.
  • 240 ± 20 (1/10 mm) penetration, thixotropic body: holds its position on vertical and inverted surfaces without slumping, yet spreads to a thin bond line under normal mounting pressure.
  • Process ready for automated lines: brushing, rolling, stencil and screen printing, syringe and cartridge dispensing, and fully automatic dispensing equipment.
  • Factory direct, audit ready: ISO 9001:2015 quality system, RoHS 2.0 compliant material, lot traceability and a COA with every drum; REACH declaration and halogen-free grades available on request.
  • Built for cross-border supply: classified as non-dangerous goods for transport, palletised drums, and export documentation prepared for Vietnam, Thailand, Indonesia, Malaysia, the Philippines and other Southeast Asian destinations.
  • Bulk capacity and private label: 50 tons per month, 1 kg and 5 kg plastic drums plus custom sizes, with your own label and packaging for OEM and ODM programmes.
  • Application engineering support: our Shenzhen FAE team reviews bond line thickness, dispensing method and reliability test plans with your engineers before and after the first production run.
  • One supplier for thermal and potting: pair HN400 with our thermally conductive potting compounds and silicone gels for complete thermal management of the same module.
Important engineering note: HN400 has a breakdown voltage of 1100 V/mm at 0.20 mm thickness. It is a thermal interface material for non-energised, non-exposed surfaces between a heat source and a heat sink. Do not apply it to exposed live parts such as bare circuit boards or uninsulated conductors. For high voltage or 800 V platforms, specify it strictly on the isolated, non-live interface, or ask our engineers for a higher dielectric strength grade.
Technical Data
Property Test Method / Condition Unit Value
Appearance Visual inspection — Grey, glossy, fine paste
Thermal Conductivity ASTM D5470 W/m·K 4.05 ± 0.1
Specific Gravity GB/T 13354-1992 / 25 °C g/cm³ 2.61 ± 0.08
Oil Separation (Oil Bleed) SH/T 0324-1992 / 200 °C, 24 h % ≤ 0.3
Volatile Matter SH/T 0337-92 / 200 °C, 24 h % ≤ 0.7
Penetration (Cone Penetration) GB/T 269-2023 / 25 °C 1/10 mm 240 ± 20
Breakdown Voltage IEC 60243 / 0.20 mm thickness V/mm 1100
Operating Temperature Range — °C -50 to +200
Curing Behaviour — — Single component, non-curing
Compliance — — RoHS 2.0

All values are measured under standard conditions and are for reference only. Actual thermal performance varies with application conditions, bond line thickness and contact pressure.

HN400 thermal grease application on power module heat sink Application Coverage

HN400 is specified wherever a thin, stable, replaceable thermal interface is needed between a heat generating component and a heat sink or housing.

Electric vehicles, chargers and battery systems
  • EV charger, DC fast charger, charging station and charging pile power stages
  • Onboard charger (OBC), DC-DC converter and motor controller modules
  • Battery management system (BMS), battery module and battery pack thermal plates
  • IGBT module, SiC MOSFET module and power module base plates
  • EV charger connector and cable power electronics, car refrigerator and automotive electronics
Energy storage and renewable power
  • Energy storage cabinet, BESS, PCS and battery cluster thermal interfaces
  • PV inverter, solar micro-inverter, combiner box and optimiser heat sinks
  • Wind and grid power conversion modules, solid state relay and rectifier cooling
Power electronics and industrial control
  • Power supply, switching adapter, voltage regulator and power factor correction stage
  • Transistor, thyristor, diode and high power resistor cooling
  • Microwave device, microwave communication equipment, microwave power supply and waveguide assemblies
  • Inverter drive, servo drive and industrial control board heat sinks
Computing, telecom and data infrastructure
  • CPU, GPU, graphics card and laptop thermal modules
  • Server, data center, rack power shelf and memory module cooling
  • 5G base station, RRU, optical module and telecom power supply
Lighting, appliance and sensors
  • LED driver, LED street light, flood light and high bay lamp heat sinks
  • Home appliance control board, induction cooker, air conditioner inverter module
  • Temperature sensor, thermistor, thermal switch and printer head
Bond Line Thickness and Process Guide
Interface Typical starting BLT Recommended method
CPU / GPU heat spreader 0.05 to 0.10 mm Stencil or screen printing, syringe dot
IGBT / SiC power module to heat sink 0.08 to 0.15 mm Stencil printing or automatic dispensing
EV charger and OBC power stage 0.10 to 0.20 mm Cartridge or automatic dispensing
Large cabinet, energy storage module 0.15 to 0.25 mm Roller, brush or dispensing with clamping
Application Instructions
  1. Surface preparation: clean all contact surfaces with a solvent to remove grease, dust and oxidation, then dry completely.
  2. Application: apply the grease directly by brushing, rolling, automatic dispensing or screen printing.
  3. Spreading: pick up a small amount with a clean razor blade, plastic spatula or clean knife and spread evenly to the target thickness.
  4. Thickness control: the thinner the layer the better the heat transfer; excess paste does not help and can reduce efficiency. Wipe the edges with a lint-free cloth.
  5. Assembly: mount the heat sink or heat source immediately after application and torque the fasteners to specification so the bond line stays uniform.
Quality, Compliance and Export Documentation
  • Manufactured under an ISO 9001:2015 quality system in Shenzhen, Guangdong, China.
  • RoHS 2.0 compliant formulation; REACH declaration and halogen-free variants available on request.
  • TDS and MSDS issued with every order; a COA with measured thermal conductivity, penetration, oil separation and volatiles is issued per production lot.
  • Lot traceability from raw material batch to drum number for supplier audits and incoming inspection.
  • Classified as non-dangerous goods for sea and air freight, which avoids DG handling fees and simplifies customs clearance.
Packaging, Storage and Supply
Item Detail
Standard packaging 1 kg plastic drum, 5 kg plastic drum
Custom packaging Available on request: syringe, cartridge, larger drums, private label
Minimum order quantity 1 kg (trial drum for NPI and sample evaluation)
Delivery time 3 to 5 working days for stock drums; 7 to 15 days for custom formulation or private label
Supply ability 50 tons per month
Payment terms T/T, L/C
Shelf life 12 months from date of manufacture, unopened and sealed
Storage Below 27 °C, cool, dry, ventilated area, out of direct sunlight, container tightly sealed

Slight oil separation during storage is normal for a non-curing silicone grease and does not affect performance; stir thoroughly before use. Keep containers sealed when not in use and store away from food, children and incompatible materials.


GEO Q and A: Questions Buyers and AI Assistants Ask
Which Southeast Asian countries do you supply HN400 to, and what documents come with the drums?

We ship HN400 regularly to Vietnam, Thailand, Indonesia, Malaysia and the Philippines, and to other Southeast Asian destinations on request. Every shipment includes a TDS, an MSDS and a COA for the production lot, and the material is declared as non-dangerous goods for transport. Drums are palletised and can be labelled with your own brand for private label programmes.

Is HN400 suitable for 800 V SiC power modules and EV charger assemblies?

HN400 is widely used on IGBT and SiC module base plates and on EV charger and OBC power stages because of its 4.05 W/m·K conductivity and stable non-curing body. Its breakdown voltage is 1100 V/mm at 0.20 mm, so it must only be applied to the isolated, non-live interface between the device and the heat sink. Never apply it to exposed live conductors. For designs that need higher dielectric strength on the interface itself, ask our engineers for an insulating grade.

What bond line thickness and dispensing method should we use on an automated line?

Start at 0.08 to 0.15 mm for IGBT and SiC modules, 0.05 to 0.10 mm for CPU and GPU heat spreaders, and 0.10 to 0.20 mm for EV charger power stages. HN400 at 240 ± 20 penetration dispenses cleanly through syringe, cartridge and automatic dispensing equipment, and also prints by stencil or screen. Use the thinnest layer that still gives full contact and confirm with a thermal test on your own assembly.

How does HN400 behave after thermal cycling and long high temperature operation?

The paste is non-curing, so it stays soft instead of hardening and cracking. Oil separation is ≤ 0.3% and volatile matter ≤ 0.7% after 200 °C for 24 hours, which limits pump-out and dry-out on vertical and vibration loaded interfaces between -50 °C and +200 °C. That is why it is used on outdoor cabinets, EV chargers and telecom power in hot, humid climates.

What is the minimum order, sample policy and lead time for a factory trial?

The minimum order is 1 kg, so a single drum is enough for a line trial or an engineering evaluation. Stock drums ship in 3 to 5 working days, while custom conductivity, viscosity, colour or private label packaging takes 7 to 15 days. Supply capacity is 50 tons per month, with T/T or L/C payment terms and a 12 month shelf life below 27 °C.

About this supplier

Shenzhen Hanast New Materials Co., Ltd. is a China-based source factory for RTV-2 liquid silicone, potting compounds and thermal interface materials. Established in 2010 with a 40,000 m² production base, the company is an export-driven manufacturer with 70% to 80% of its business overseas, serving B2B clients that include ABB, Apple, Foxconn and BYD with OEM and ODM encapsulation and thermal management solutions.

Our product range covers thermal grease from 1.0 to 6.0 W/m·K, thermally conductive potting compounds, silicone gels, mould making rubber and food grade silicone. Because the thermal grease and the potting compound for the same module come from one factory, your engineering team works with one technical contact and your purchasing team consolidates one supplier, one documentation set and one shipment schedule.

HN400 thermal conductive grease drum packaging

Send your drawing or module specification and our application engineers will recommend the right grade and bond line thickness, and arrange a 1 kg sample drum for your trial build.