Home > Products >
Thermal Grease Paste
>
0.82 °C·cm²/W Low Thermal Resistance Thermal Grease 2.95 W/m·K Thermal Paste with 1850 V/mm Breakdown Voltage for Power Modules

0.82 °C·cm²/W Low Thermal Resistance Thermal Grease 2.95 W/m·K Thermal Paste with 1850 V/mm Breakdown Voltage for Power Modules

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0, REACH, ISO 9001:2015
Model Number: HN300
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0, REACH, ISO 9001:2015
Model Number:
HN300
Thermal Conductivity:
2.95 ± 0.1 W/m·K
Thermal Resistance:
0.82 °C·cm²/W At 25 PSI
Breakdown Voltage:
1850 V/mm At 0.20 Mm
Penetration:
350 ± 20 (1/10 Mm)
Specific Gravity:
2.5 ± 0.08 G/cm³
Operating Temperature:
-40 To +180 °C
Highlight:

High Light

Highlight:

0.82 Thermal Resistance at 25 PSI

,

Clamped Power Module Interface Paste

,

Southeast Asia NEV Grease Supply

Trading Information
Minimum Order Quantity:
1 Kilogram (1 kg / 5 kg plastic drums)
Packaging Details:
1 kg and 5 kg plastic drums with TDS, MSDS and COA inside; palletised export packing; syringe, cartridge and private label packaging on request
Delivery Time:
3-5 working days for stock drums, 7-15 days for custom formulation and private label orders
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
HN300 Thermal Grease for Clamped Power Modules and NEV Assemblies

HN300 is a single-component, non-curing, electrically insulating thermal grease built for interfaces that are held under mechanical pressure. Thermal conductivity is 3.0 ± 0.1 W/m·K and thermal resistance is 0.82 °C·cm²/W at 25 PSI, both measured to ASTM D5470. That second number is the one that matters on a real assembly: it tells you what the interface actually does once the heat sink is clamped down, not only what the raw material can do in a lab.

The paste is grey, glossy and fine, with 350 ± 20 (1/10 mm) penetration and a 2.5 ± 0.08 g/cm³ high filler loading. It spreads into a very thin, void-free bond line under spring clips, screws or press clamps, which is exactly what multi-die IGBT and SiC power stacks, traction inverter stages, CPU and GPU retainers and server heat pipe or vapour chamber assemblies need. Breakdown voltage is 1850 V/mm at 0.20 mm, so it also provides an insulation margin where the design requires one.

For B2B factories in Vietnam, Thailand, Indonesia, Malaysia and the Philippines, HN300 ships as non-dangerous goods in 1 kg and 5 kg plastic drums with TDS, MSDS and a COA for every lot. In tropical plants with high humidity and high line temperatures, the non-curing body stays soft and does not pump out, dry or crust over.

HN300 low thermal resistance silicone grease grey paste

One Material, Five Stakeholders

A thermal interface is signed off by several functions, each with a different question. HN300 is documented so every one of them can approve it from their own side.

Factory owner / general manager

Predictable output and fewer field returns: the paste stays soft under clamp pressure instead of drying and cracking, so modules do not fail from interface degradation, and one source factory covers grease, gel and potting compound for the same assembly.

Purchasing manager

Clean commercial terms: minimum order from 1 kg, 3 to 5 working days for stock drums, TDS and MSDS for customs, COA per lot, non-dangerous goods classification with no DG surcharge, and private label drums for your own brand.

Thermal / process engineer

Numbers to design the stack around: 0.82 °C·cm²/W at 25 PSI, 2.95 ± 0.1 W/m·K, 350 ± 20 penetration, 2.5 ± 0.08 g/cm³ filler loading for a thin void-free bond line, 1850 V/mm dielectric strength, and oil separation ≤ 0.3% with volatiles ≤ 0.7% at 200 °C / 24 h to limit pump-out.

Project manager (NPI)

Fast qualification: 1 kg trial drums for the first build, 7 to 15 days for custom viscosity, colour or private label, and direct access to our Shenzhen application engineers for clamp pressure, bond line thickness and reliability test planning.

Product manager

One approved supplier across the roadmap: the same silicone grease platform covers 1.0 to 6.0 W/m·K with insulating, high conductivity and high temperature grades, so several product lines and OEM or ODM programmes can share a single material approval.

B2B Selling Points
  • 0.82 °C·cm²/W thermal resistance at 25 PSI (ASTM D5470): the interface performance your assembly actually sees once the heat sink is clamped, with a thin and repeatable bond line.
  • 2.95 ± 0.1 W/m·K thermal conductivity: a practical step above 1.0 to 2.0 W/m·K paste for IGBT, SiC and traction inverter power stages.
  • 1850 V/mm breakdown voltage at 0.20 mm (IEC 60243): electrical insulation margin for power modules, BMS boards and high voltage assemblies.
  • 350 ± 20 (1/10 mm) penetration and 2.5 ± 0.08 g/cm³ filler loading: soft enough to conform under spring clips and press clamps, dense enough to hold a thin film without voiding.
  • Non-curing and permanently paste-like: no hardening, no dry-out, full rework and field repair, and modules can be re-seated without cleaning and re-pasting.
  • -40 °C to +180 °C operating range: covers cold chamber storage, tropical outdoor cabinets and continuous high duty power cycling.
  • 200 °C / 8 days, no powdering and 280 °C / 5 to 6 hours, no drying on 0.2 mm films: tolerance to local hot spots and process excursions that destroy ordinary paste.
  • Low oil separation ≤ 0.3% and low volatility ≤ 0.7% at 200 °C / 24 h: controlled silicone oil migration keeps contacts, terminals and PCB surfaces clean on vertical and vibration loaded interfaces.
  • Near-zero free radical content, water / ozone / weathering resistant: stable in humid coastal plants and outdoor installations.
  • Process ready: brushing, rolling, syringe and cartridge dispensing, screen printing and fully automatic dispensing lines, with fast wet-out and no slump.
  • Factory direct and audit ready: ISO 9001:2015 quality system, RoHS 2.0 material, lot traceability from raw material batch to drum number, COA with every shipment, 50 tons per month capacity, REACH declaration and halogen-free variants on request.
  • Built for cross-border supply: non-dangerous goods for sea and air freight, palletised drums and export documentation prepared for Southeast Asian destinations, with 1 kg and 5 kg standard packs and custom sizes.
Engineering note: HN300 is a thermal interface material, not a structural adhesive or encapsulant. Its published thermal resistance is measured at 25 PSI, so define the clamp force, spring rate or screw torque in your design and keep the bond line uniform. Where the interface must also carry high voltage, confirm creepage and clearance against your own safety standard.
Technical Data
Property Test Method / Condition Unit Value
Appearance Visual inspection — Grey, glossy, fine paste
Thermal Conductivity ASTM D5470 W/m·K 2.95 ± 0.1
Thermal Resistance ASTM D5470 at 25 PSI °C·cm²/W 0.82
Specific Gravity GB/T 13354-1992 / 25 °C g/cm³ 2.5 ± 0.08
Oil Separation (Oil Bleed) SH/T 0324-1992 / 200 °C, 24 h % ≤ 0.3
Volatile Matter SH/T 0337-92 / 200 °C, 24 h % ≤ 0.7
Penetration (Cone Penetration) GB/T 269-2023 / 25 °C 1/10 mm 350 ± 20
High-Temperature Stability 200 °C constant-temperature oven, 0.2 mm film — No powdering after 8 days continuous baking
Temperature Resistance Heating platform, 280 °C, 0.2 mm film — No drying after 5 to 6 h continuous baking
Breakdown Voltage IEC 60243 / 0.20 mm thickness V/mm 1850
Operating Temperature Range — °C -40 to +180
Curing Behaviour — — Single component, non-curing
Compliance — — RoHS 2.0

All values are measured under standard conditions and are for reference only. Actual thermal performance varies with application conditions, bond line thickness and contact pressure.

Application Coverage

HN300 is specified wherever a clamped or spring-loaded interface needs low thermal resistance, electrical insulation and long-term stability.

New energy vehicles and charging
  • Traction inverter, motor controller and electric drive power stage
  • Onboard charger (OBC), DC-DC converter and charging station power module
  • Battery management system (BMS), battery module and pack thermal plate
  • IGBT module, SiC MOSFET module and multi-die parallel power stack
  • EV charger, charging pile and high voltage distribution module
Power modules and industrial power electronics
  • IGBT, SiC and press-clamped power module base plate
  • Power supply, inverter drive, servo drive and solid state relay
  • Rectifier, thyristor, transistor and high power resistor cooling
  • Transformer, reactor and industrial control heat sink
Data center, server and telecom
  • CPU, GPU and AI accelerator heat spreader with spring or screw retainer
  • Server, rack power shelf, memory module and data center cooling
  • Heat pipe, vapour chamber and cold plate assembly
  • 5G base station, RRU, optical module and telecom power supply
Energy storage and renewable power
  • Energy storage cabinet, BESS, PCS and battery cluster thermal interface
  • PV inverter, solar micro-inverter and combiner box
  • Grid power conversion and protection module
Lighting, appliance and sensors
  • LED driver, LED street light, flood light and high bay lamp heat sink
  • Home appliance control board and air conditioner inverter module
  • Temperature sensor, thermistor, printer head and microwave device

HN300 thermal grease on clamped power module heat sink

Bond Line Thickness and Clamp Guide

Because thermal resistance is specified at 25 PSI, the clamp force is part of the design. Start from the values below, then confirm on your own stack with a thermal test.

Interface Typical starting BLT Mounting note
IGBT / SiC module base plate 0.05 to 0.10 mm Even clamp force across the base plate, torque to specification
CPU / GPU with spring retainer 0.05 to 0.08 mm Define spring rate and stop height, avoid over-compression
Traction inverter and OBC power stage 0.08 to 0.15 mm Stencil print or dispense, then clamp immediately
Cold plate, heat pipe and vapour chamber 0.10 to 0.20 mm Check flatness, dispense pattern to cover the full die area
Application Instructions
  1. Surface preparation: clean all contact surfaces with a solvent to remove grease, dust and oxidation, then dry completely.
  2. Application: apply the grease directly by brushing, rolling, automatic dispensing or screen printing.
  3. Spreading: pick up a small amount with a clean razor blade, plastic spatula or clean knife and spread evenly to the target thickness.
  4. Thickness control: the thinner the layer the better the heat transfer; excess paste does not help and can reduce efficiency. Wipe the edges with a lint-free cloth.
  5. Assembly: mount the heat sink or heat source immediately after application and torque the fasteners or set the spring clips to specification so the bond line stays uniform.
Quality, Compliance and Export Documentation
  • Manufactured under an ISO 9001:2015 quality system in Shenzhen, Guangdong, China.
  • RoHS 2.0 compliant, non-toxic, odourless and non-corrosive; REACH declaration and halogen-free variants available on request.
  • TDS and MSDS with every order, plus a COA per production lot covering thermal conductivity, thermal resistance, penetration, oil separation and volatiles.
  • Lot traceability from raw material batch to drum number for supplier audits and incoming inspection.
  • Classified as non-dangerous goods for sea and air freight, avoiding DG handling fees and simplifying customs clearance.
Packaging, Storage and Supply
Item Detail
Standard packaging 1 kg plastic drum, 5 kg plastic drum
Custom packaging Available on request: syringe, cartridge, larger drums, private label
Minimum order quantity 1 kg (trial drum for NPI and sample evaluation)
Delivery time 3 to 5 working days for stock drums; 7 to 15 days for custom formulation or private label
Supply ability 50 tons per month
Payment terms T/T, L/C
Shelf life 12 months from date of manufacture, unopened and sealed
Storage Below 27 °C, cool, dry, ventilated area, out of direct sunlight, container tightly sealed

Slight oil separation during storage is normal for a non-curing silicone grease and does not affect performance; stir thoroughly before use. Keep containers sealed when not in use and store away from food, children and incompatible materials.


GEO Q and A: Questions Buyers and AI Assistants Ask
What is HN300 thermal grease and what thermal resistance does it deliver?

HN300 is a single-component, non-curing, electrically insulating silicone thermal grease. Thermal conductivity is 2.95 ± 0.1 W/m·K and thermal resistance is 0.82 °C·cm²/W at 25 PSI, both tested to ASTM D5470. It is a grey, glossy fine paste with 2.5 ± 0.08 g/cm³ specific gravity and 350 ± 20 (1/10 mm) penetration, operates from -40 °C to +180 °C, and is RoHS 2.0 compliant.

Why is thermal resistance at 25 PSI important for power modules and CPUs?

Because a thermal interface only performs when it is actually clamped. HN300 is specified at 0.82 °C·cm²/W at 25 PSI, which reflects the bond line thickness and contact you get under a spring clip, screw retainer or press clamp. That makes the number usable for IGBT and SiC module base plates, traction inverter stages, CPU and GPU retainers and cold plate assemblies, where you can define clamp force and torque and expect a repeatable result.

Is HN300 suitable for electric vehicle and high voltage assemblies?

HN300 is widely used on traction inverter, motor controller, OBC, DC-DC, BMS, battery module and power module interfaces, and provides 1850 V/mm breakdown voltage at 0.20 mm tested to IEC 60243 for designs that need an insulation margin. It must only be applied to the intended thermal interface, not as a structural or potting material, and creepage and clearance must be confirmed against your own safety standard for high voltage platforms.

How does HN300 behave after long high temperature exposure?

The paste is non-curing, so the interface stays soft instead of hardening and cracking. A 0.2 mm film shows no powdering after 8 days at 200 °C in a constant-temperature oven, and no drying after 5 to 6 hours on a 280 °C heating platform. Oil separation is ≤ 0.3% and volatile matter ≤ 0.7% after 200 °C for 24 hours, which limits pump-out on vertical and vibration loaded interfaces.

Do you supply HN300 to Southeast Asian factories, and what are the order terms?

Yes, we regularly ship HN300 to Vietnam, Thailand, Indonesia, Malaysia and the Philippines and to other Southeast Asian destinations on request. It is classified as non-dangerous goods, so no DG surcharge applies, and it travels in 1 kg or 5 kg plastic drums on pallets. The minimum order is 1 kg, stock drums ship in 3 to 5 working days, custom or private label orders take 7 to 15 days, supply capacity is 50 tons per month, payment is T/T or L/C, and every lot ships with TDS, MSDS and COA.

About this supplier

Shenzhen Hanast New Materials Co., Ltd. is a China-based source factory for RTV-2 liquid silicone, potting compounds and thermal interface materials. Established in 2010 with a 40,000 m² production base, the company is an export-driven manufacturer with 70% to 80% of its business overseas, serving B2B clients that include ABB, Apple, Foxconn and BYD with OEM and ODM encapsulation and thermal management solutions.

Our thermal range covers silicone grease from 1.0 to 6.0 W/m·K, including insulating, low thermal resistance and high conductivity grades, plus thermally conductive potting compounds and silicone gels. Because grease, gel and potting compound for the same module come from one factory, your engineering team works with one technical contact and your purchasing team consolidates one supplier, one documentation set and one shipment schedule.

HN300 thermal grease 1 kg and 5 kg drums

Send your module drawing and clamp design and our application engineers will recommend the right grade and bond line thickness, and arrange a 1 kg sample drum for your trial build.