HN100 is a single-component, non-curing silicone thermal grease supplied as a factory-direct OEM and private label platform, not only as a stock drum. The base grade delivers 1.0 ± 0.1 W/m·K (ASTM D5470) with 2450 V/mm breakdown voltage at 0.20 mm, a white or grey paste with 370 ± 20 (1/10 mm) penetration that spreads easily on stamped and cast heat sinks, and it stays paste-like from -50 °C to +200 °C.
For distributors, brand owners and contract manufacturers in Vietnam, Thailand, Indonesia, Malaysia and the Philippines, the value is in the flexibility around that base: conductivity grades from 1.0 to 6.0 W/m·K, adjusted viscosity and penetration, colour matching, syringe, cartridge or drum packaging, and your own label and artwork. You can launch a house-brand thermal compound without building a factory, and keep the same formulation as volume grows.
Every order ships as non-dangerous goods with TDS, MSDS and a lot COA, and the standard drum is 1 kg or 5 kg. That combination makes it practical to start with a 1 kg sample, run a pilot batch, then scale to pallet volumes with the same material and the same documentation.
![]()
The commercial value of an OEM programme is speed and repeatability. HN100 is set up so a private label project moves through five clear steps.
An OEM thermal compound is approved by several functions, each with a different concern. HN100 is documented so every one of them can sign off.
Launch a house brand without capital expenditure: no mixing line, no filling line, no regulatory paperwork of your own. You buy a finished, documented product and put your label on it, with one source factory behind grease, gel and potting compound.
Clear terms: minimum order from 1 kg, stock in 3 to 5 working days, custom or private label in 7 to 15 days, T/T or L/C, TDS and MSDS for customs, COA per lot, non-dangerous goods with no DG surcharge, and stable pricing structure for repeat orders.
Adjustable to your process: 1.0 ± 0.1 W/m·K base, 2450 V/mm dielectric strength, 1.85 ± 0.08 g/cm³, 370 ± 20 penetration, oil separation ≤ 0.3% and volatiles ≤ 0.6% at 200 °C / 24 h, and viscosity tuning for syringe, cartridge or automatic dispensing.
A predictable launch path: 1 kg sample, pilot batch, approval on the production lot, then repeat supply, with direct access to our Shenzhen application engineers for BLT, dispensing and packaging decisions.
Room to build a range: the same approved supplier covers 1.0 to 6.0 W/m·K, insulating and high conductivity grades, several colours and several pack formats, so one thermal compound can become a full product line under your brand.
| Option | Standard | Custom on request |
|---|---|---|
| Thermal conductivity | 1.0 ± 0.1 W/m·K | Grades across 1.0 to 6.0 W/m·K |
| Colour | White or grey paste | Colour matching to your sample or brand |
| Consistency | 370 ± 20 (1/10 mm) | Viscosity and penetration adjusted for your process |
| Packaging | 1 kg and 5 kg plastic drum | Syringe, cartridge, larger drums, private label |
| Branding | Neutral pack | Your label, artwork and multi-language text |
| Documentation | TDS, MSDS, lot COA | REACH declaration and SVHC information on request |
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance | Visual inspection | — | White or grey paste |
| Thermal Conductivity | ASTM D5470 | W/m·K | 1.0 ± 0.1 |
| Specific Gravity | GB/T 13354-1992 / 25 °C | g/cm³ | 1.85 ± 0.08 |
| Oil Separation (Oil Bleed) | SH/T 0324-1992 / 200 °C, 24 h | % | ≤ 0.3 |
| Volatile Matter | SH/T 0337-92 / 200 °C, 24 h | % | ≤ 0.6 |
| Penetration (Cone Penetration) | GB/T 269-2023 / 25 °C | 1/10 mm | 370 ± 20 |
| High-Temperature Stability | 200 °C constant-temperature oven, 0.2 mm film | — | No powdering after 8 days continuous baking |
| Temperature Resistance | Heating platform, 280 °C, 0.2 mm film | — | No drying after 3 h continuous baking |
| Breakdown Voltage | IEC 60243 / 0.20 mm thickness | V/mm | 2450 |
| Operating Temperature Range | — | °C | -50 to +200 |
| Curing Behaviour | — | — | Single component, non-curing |
| Compliance | — | — | RoHS 2.0 |
All values are measured under standard conditions and are for reference only. Actual thermal performance varies with application conditions, bond line thickness and contact pressure.
![]()
The HN100 platform is used across general electronics thermal management, and the same base grade can be tuned for each of the following groups.
Heat sinks, power supplies and industrial electronics| Item | Detail |
|---|---|
| Standard packaging | 1 kg plastic drum, 5 kg plastic drum |
| Custom packaging | Syringe, cartridge, larger drums and private label on request |
| Minimum order quantity | 1 kg (trial drum for sample evaluation and pilot runs) |
| Delivery time | 3 to 5 working days for stock drums; 7 to 15 days for custom formulation or private label |
| Supply ability | 50 tons per month |
| Payment terms | T/T, L/C |
| Shelf life | 12 months from date of manufacture, unopened and sealed |
| Storage | Below 27 °C, cool, dry, ventilated area, out of direct sunlight, container tightly sealed |
Slight oil separation during storage is normal for a non-curing silicone grease and does not affect performance; stir thoroughly before use. Keep containers sealed when not in use and store away from food, children and incompatible materials.
Yes. HN100 is supplied as an OEM and private label platform from 1 kg. We can fill 1 kg and 5 kg drums, syringes or cartridges with your label and artwork, and where needed adjust conductivity between 1.0 and 6.0 W/m·K, viscosity, penetration and colour before filling. Custom and private label runs take 7 to 15 days, and every lot ships with a TDS, an MSDS and a COA.
The base grade has 1.0 ± 0.1 W/m·K thermal conductivity to ASTM D5470, 2450 V/mm breakdown voltage at 0.20 mm to IEC 60243, 1.85 ± 0.08 g/cm³ specific gravity and 370 ± 20 (1/10 mm) penetration. It operates from -50 °C to +200 °C, shows no powdering after 8 days at 200 °C and no drying after 3 hours at 280 °C on a 0.2 mm film, keeps oil separation at or below 0.3% and volatile matter at or below 0.6%, and is RoHS 2.0 compliant.
A private label programme can start from 1 kg for evaluation. The standard grade ships from stock in 3 to 5 working days for bench or line trials, and custom formulation, colour or label packaging takes 7 to 15 days. A typical launch runs sample, pilot batch, approval of the production lot COA, then repeat supply, with capacity of 50 tons per month behind it.
HN100 is used on heat sinks in power supplies, adapters, transformers, relays, solid state relays, power resistors and industrial control boards, on EV chargers, OBC, DC-DC converters, BMS boards and battery modules, on energy storage cabinets, PCS and PV inverters, on servers, data center equipment, 5G telecom, printers and temperature sensors, and on LED drivers, home appliances, induction cookers and heating elements.
Yes. We regularly ship to Vietnam, Thailand, Indonesia, Malaysia and the Philippines and to other Southeast Asian destinations on request. The material is classified as non-dangerous goods, so no dangerous goods surcharge applies, and drums travel palletised. Every lot carries a TDS, MSDS and COA, and a REACH declaration or SVHC information can be supplied on request for your registration and customer questionnaires.
Shenzhen Hanast New Materials Co., Ltd. is a China-based source factory for RTV-2 liquid silicone, potting compounds and thermal interface materials. Established in 2010 with a 40,000 m² production base, the company is an export-driven manufacturer with 70% to 80% of its business overseas, serving B2B clients that include ABB, Apple, Foxconn and BYD with OEM and ODM encapsulation and thermal management solutions.
Our thermal range covers silicone grease from 1.0 to 6.0 W/m·K, including insulating, low thermal resistance and high conductivity grades, plus thermally conductive potting compounds and silicone gels. Private label filling, colour matching and formulation adjustment are handled in house, so a distributor or brand owner can build a thermal compound line without owning a mixing or filling facility.
![]()
Send your target specification and label artwork and our application engineers will confirm the grade, packing and lead time, and arrange a 1 kg sample drum for your trial build.