1:1 Platinum Cure Liquid Silicone Rubber Wide Temperature Range For Plaster Culture Stone Molds

1:1 Platinum Cure Liquid Silicone Rubber Wide Temperature Range for Plaster Culture Stone Molds

Product Details

① High tear resistance and outstanding tensile strength deliver durable silicone molds resistant to deformation.

② Formulated to be non-oozing, it effectively eliminates oil bleeding issues during resin casting.

③ Ultra-low shrinkage ≤0.1%. Supports repeated demolding and extends mold service life.

④ Hardness, viscosity and pot life of the mold silicone are customizable to satisfy diverse customer demands.

⑤ Superior heat resistance: stable up to 180°C–250°C. With special heat-resistant additives, temperature resistance can reach 300°C, preventing mold scorching induced by exothermic heat during resin curing.

Characteristic

① Boasting superior tensile and tear strength, the silicone mold stays rigid and deformation-free for prolonged repeated use.

② Adopts a non-oozing customized formula, completely solving oil bleeding issues during resin demolding and casting.

③ Ultra-low shrinkage of ≤0.1% allows extensive mold cycling and significantly extends mold service life.

④ Hardness, viscosity and working time are fully customizable to accommodate diverse molding and production demands.

⑤ Features outstanding thermal stability, tolerating continuous temperatures of 180°C–250°C. With specialized heat-resistant additives, the temperature resistance can be upgraded to 300°C, effectively preventing mold scorching caused by resin curing exotherm.

Operation method

Process demonstration for condensation-type silicone, using simply patterned small handicrafts as samples:

① Mix silicone and curing agent at 100:2–2.5, stir evenly.

② Degas the mixed silicone in a vacuum chamber to avoid bubbles and ensure smooth mold surfaces. Without vacuum equipment, bubbles can rise naturally by prolonging curing time, yet the result will not be ideal.

③ Coat the master mold and mold frame with Vaseline. Fix the master in the center, slowly pour degassed silicone into the frame to fully cover the prototype, then leave to cure.

④ Demold after full silicone curing, and trim rough edges of the silicone mold.

⑤ It is recommended to age the silicone mold for 24 hours prior to use to obtain the best molding performance.

Precautions

Hardness selection

Technical parameters

Packaging