HN300 is a single-component, non-curing thermally conductive insulating silicone grease developed for automotive electronics and electric vehicle power assemblies. It delivers 2.95 ± 0.1 W/m·K thermal conductivity with 0.82 °C·cm²/W thermal resistance at 25 PSI, and maintains a paste-like state from −40°C to +180°C, covering cold start through under-hood heat soak. The dielectric compound provides 1850 V/mm breakdown voltage at 0.20 mm, low oil bleed and low volatility for sealed modules, and remains reworkable after assembly. It is non-corrosive to aluminium, copper and PCB materials and compliant with RoHS 2.0.
![]()
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance | Visual inspection | — | Grey, glossy, fine paste |
| Thermal Conductivity | ASTM D5470 | W/m·K | 2.95 ± 0.1 |
| Thermal Resistance | ASTM D5470 @ 25 PSI | °C·cm²/W | 0.82 |
| Specific Gravity | GB/T 13354-1992 / 25°C | g/cm³ | 2.5 ± 0.08 |
| Oil Separation (Oil Bleed) | SH/T 0324-1992 / 200°C, 24h | % | ≤ 0.3 |
| Volatile Matter | SH/T 0337-92 / 200°C, 24h | % | ≤ 0.7 |
| Penetration (Cone Penetration) | GB/T 269-2023 / 25°C | 1/10 mm | 350 ± 20 |
| High-Temperature Stability | 200°C constant-temperature oven, 0.2 mm film | — | No powdering after 8 days of continuous baking |
| Temperature Resistance | Heating platform, 280°C, 0.2 mm film | — | No drying after 5–6h continuous baking |
| Breakdown Voltage | IEC 60243 / 0.20 mm thickness | V/mm | 1850 |
| Operating Temperature Range | — | °C | −40 to +180 |
| Curing Type | — | — | Single-component, non-curing |
| Chemical Compliance | — | — | RoHS 2.0, non-toxic, odourless, non-corrosive |
All values are measured under standard conditions and are for reference only. Actual thermal performance may vary with application conditions, bond line thickness and contact pressure.
![]()
Yes. It provides 2.95 ± 0.1 W/m·K conductivity and 0.82 °C·cm²/W thermal resistance at 25 PSI (ASTM D5470), with a −40°C to +180°C operating range that covers both cold start and under-hood heat soak in OBC and DC-DC assemblies.
Breakdown voltage is 1850 V/mm at 0.20 mm thickness per IEC 60243. The compound is a non-conductive dielectric silicone grease, suitable between live power devices and grounded heat sinks, and it is non-corrosive to aluminium, copper and PCB materials.
It remains a non-curing paste from −40°C to +180°C. A 0.2 mm film shows no powdering after 8 days at 200°C and no drying after 5–6 hours at 280°C, so the interface does not harden, crack or dry out.
Oil separation is ≤ 0.3% and volatile matter is ≤ 0.7% after 200°C for 24 hours, tested to SH/T 0324-1992 and SH/T 0337-92. Low volatility and low oil bleed reduce contamination risk inside sealed automotive modules.
The HN series covers 1.0 to 6.0 W/m·K in six grades (HN100 to HN600). Standard packaging is 1 kg and 5 kg plastic drums with MSDS and TDS; syringe and cartridge filling are available. Shelf life is 12 months stored unopened below 27°C.
Send us your module type, clamp pressure, bond line thickness target and annual volume, and our engineering team will confirm the matching HN grade, packing format and lead time. OEM and ODM service, free samples and factory-direct supply are available. Contact us today for the full TDS and samples.
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
![]()
In RFQs, drawings and procurement portals this product family is also written as thermal paste, thermal compound, thermal conductive grease, heat sink compound, heatsink compound, heat sink grease, thermal joint compound or heat transfer compound, and is commonly abbreviated to TIM (thermal interface material). All of these names refer to the same non-curing silicone heat transfer paste described on this page, so buyers comparing quotations under different wording are comparing the same product type.
How to Compare Data Sheet ValuesWhen you compare this grade with other suppliers, ask for the same test conditions, otherwise the figures are not comparable:
| Parameter | Why it decides the result | What to request |
|---|---|---|
| Thermal conductivity (W/m·K) | Bulk capability of the paste to move heat | Test method, e.g. ASTM D5470, and tolerance |
| Thermal resistance / thermal impedance | Real interface performance at working bond line thickness and pressure | Value in °C·cm²/W at a stated pressure and BLT |
| Dielectric strength / breakdown voltage | Whether the paste can insulate a live power module | V/mm at a defined film thickness, e.g. IEC 60243 at 0.20 mm |
| Oil bleed and volatility | Risk of pump-out, dry-out and contamination over service life | % at 200°C / 24 h |
| Penetration and viscosity | Whether the line can dispense, stencil print or screen print it | Penetration (1/10 mm) at 25°C |
| Operating temperature range | Cold start and continuous high temperature capability | Continuous range plus short-term peak |
For automotive, outdoor and continuous-duty equipment, qualify the interface material against the following points before release to production:
We are a manufacturer rather than a trading company, so bulk orders, wholesale pricing and private label programs are handled directly in house. Free sample and small trial order are supported before a volume commitment, and OEM / ODM formulation changes (thermal conductivity, viscosity, colour, filler loading) can be quoted on request.
| Item | Details |
|---|---|
| MOQ | 1 Kilogram |
| Lead time | 3-7 working days for stock, 15-25 days for production |
| Packaging | 1 kg plastic drum and 5 kg plastic drum with MSDS and TDS, syringe or cartridge filling on request |
| Payment terms | T/T,L/C,Western Union |
| Supply ability | 50 Tons per Month |
For evaluation, a datasheet (TDS) with the full technical data and an MSDS are provided before shipment, and fast delivery is available for repeat orders.
Documents and ComplianceEvery figure on this page refers to the grade described above; values are typical and measured under standard conditions. Please request the current technical data sheet (TDS) and confirm the grade, packaging and test report requirements with our technical team before placing a bulk order.