HN100 is a single-component, non-curing thermally conductive silicone grease formulated for power semiconductors that need heat transfer and electrical isolation at the same time. It combines 1.0 ± 0.1 W/m·K thermal conductivity with a breakdown voltage of 2450 V/mm at 0.20 mm thickness, and keeps a stable paste consistency from −50°C to +200°C. The compound has near-zero free radical content and resists water, ozone and weathering, so it stays stable in outdoor cabinets, microwave transmission equipment and continuously energized power assemblies. It is non-toxic, odourless, non-corrosive and compliant with RoHS 2.0.
![]()
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance | Visual inspection | — | White or grey paste |
| Thermal Conductivity | ASTM D5470 | W/m·K | 1.0 ± 0.1 |
| Specific Gravity | GB/T 13354-1992 / 25°C | g/cm³ | 1.85 ± 0.08 |
| Oil Separation (Oil Bleed) | SH/T 0324-1992 / 200°C, 24h | % | ≤ 0.3 |
| Volatile Matter | SH/T 0337-92 / 200°C, 24h | % | ≤ 0.6 |
| Penetration (Cone Penetration) | GB/T 269-2023 / 25°C | 1/10 mm | 370 ± 20 |
| High-Temperature Stability | 200°C constant-temperature oven, 0.2 mm film | — | No powdering after 8 days of continuous baking |
| Temperature Resistance | Heating platform, 280°C, 0.2 mm film | — | No drying after 3h continuous baking |
| Breakdown Voltage | IEC 60243 / 0.20 mm thickness | V/mm | 2450 |
| Operating Temperature Range | — | °C | −50 to +200 |
| Curing Type | — | — | Single-component, non-curing |
| Chemical Compliance | — | — | RoHS 2.0, non-toxic, odourless, non-corrosive |
All values are measured under standard conditions and are for reference only. Actual thermal performance may vary with application conditions, bond line thickness and contact pressure.
The paste is used as a thermal interface between heat-generating components and heat-dissipation components in electronic and electrical equipment, with particular strength in insulated power semiconductor assemblies:
![]()
Yes. Breakdown voltage is 2450 V/mm at 0.20 mm thickness per IEC 60243, the highest dielectric level in the HN series. It provides electrical isolation between power transistors, thyristors and IGBT assemblies while transferring heat at 1.0 ± 0.1 W/m·K.
Yes. The paste is designed for surface coating and full encapsulation of microwave devices, microwave communication systems, microwave transmission equipment and regulated power supplies, and it resists water, ozone and weathering.
A 0.2 mm film shows no powdering after 8 days of continuous baking at 200°C and no drying after 3 hours at 280°C. The operating range is −50°C to +200°C and the material stays a non-curing paste instead of hardening.
Oil separation is ≤ 0.3% and volatile matter is ≤ 0.6% after 200°C for 24 hours. Free radical content is near zero, and the compound resists water, ozone and weathering, which supports long service in outdoor cabinets and continuously energized equipment.
Brushing, rolling, automatic dispensing and screen printing, with penetration of 370 ± 20 (1/10 mm) at 25°C. Packaging is 1 kg and 5 kg plastic drums with custom sizes on request; shelf life is 12 months stored unopened below 27°C.
Send us your device type, working voltage, bond line thickness target and annual volume, and our engineering team will confirm the suitable grade, packing format and lead time. OEM and ODM service, free samples and factory-direct supply are available. Contact us today for the full TDS and samples.
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
![]()
In RFQs, drawings and procurement portals this product family is also written as thermal paste, thermal compound, thermal conductive grease, heat sink compound, heatsink compound, heat sink grease, thermal joint compound or heat transfer compound, and is commonly abbreviated to TIM (thermal interface material). All of these names refer to the same non-curing silicone heat transfer paste described on this page, so buyers comparing quotations under different wording are comparing the same product type.
How to Compare Data Sheet ValuesWhen you compare this grade with other suppliers, ask for the same test conditions, otherwise the figures are not comparable:
| Parameter | Why it decides the result | What to request |
|---|---|---|
| Thermal conductivity (W/m·K) | Bulk capability of the paste to move heat | Test method, e.g. ASTM D5470, and tolerance |
| Thermal resistance / thermal impedance | Real interface performance at working bond line thickness and pressure | Value in °C·cm²/W at a stated pressure and BLT |
| Dielectric strength / breakdown voltage | Whether the paste can insulate a live power module | V/mm at a defined film thickness, e.g. IEC 60243 at 0.20 mm |
| Oil bleed and volatility | Risk of pump-out, dry-out and contamination over service life | % at 200°C / 24 h |
| Penetration and viscosity | Whether the line can dispense, stencil print or screen print it | Penetration (1/10 mm) at 25°C |
| Operating temperature range | Cold start and continuous high temperature capability | Continuous range plus short-term peak |
For automotive, outdoor and continuous-duty equipment, qualify the interface material against the following points before release to production:
We are a manufacturer rather than a trading company, so bulk orders, wholesale pricing and private label programs are handled directly in house. Free sample and small trial order are supported before a volume commitment, and OEM / ODM formulation changes (thermal conductivity, viscosity, colour, filler loading) can be quoted on request.
| Item | Details |
|---|---|
| MOQ | 1 Kilogram |
| Lead time | 3-7 working days for stock, 15-20 days for bulk production |
| Packaging | 1 kg and 5 kg plastic drums with MSDS and TDS, custom package sizes on request |
| Payment terms | T/T,L/C,Western Union |
| Supply ability | 50 Tons per Month |
For evaluation, a datasheet (TDS) with the full technical data and an MSDS are provided before shipment, and fast delivery is available for repeat orders.
Documents and ComplianceEvery figure on this page refers to the grade described above; values are typical and measured under standard conditions. Please request the current technical data sheet (TDS) and confirm the grade, packaging and test report requirements with our technical team before placing a bulk order.