Home > Products >
Thermal Grease Paste
>
3.04 g/cm³ Filler Loading 300 Penetration Thermal Grease Paste with 2.0 W/mK Thermal Conductivity for Heat Sink Cooling

3.04 g/cm³ Filler Loading 300 Penetration Thermal Grease Paste with 2.0 W/mK Thermal Conductivity for Heat Sink Cooling

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0
Model Number: HN200
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0
Model Number:
HN200
Thermal Conductivity:
2.05 ± 0.1 W/m·K
Thermal Resistance:
0.82 °C·cm²/W At 25 PSI
Specific Gravity:
3.04 ± 0.08 G/cm³ At 25°C
Penetration:
300 ± 20 (1/10 Mm) At 25°C
Breakdown Voltage:
2450 V/mm At 0.20 Mm
Operating Temperature:
-50 To +200 °C
Highlight:

High Light

Highlight:

3.04 g/cm3 Pump Out Resistance

,

Near Zero Ionisation Silicone Grease

,

300 Penetration Vertical Mount Paste

Trading Information
Minimum Order Quantity:
1 Kilogram
Packaging Details:
1 kg and 5 kg plastic drums with MSDS and TDS, custom package sizes on request
Delivery Time:
3-7 working days for stock, 15-20 days for bulk production
Payment Terms:
T/T,L/C,Western Union
Supply Ability:
50 Tons per Month
Product Description
2.0 W/mK Thermal Grease Paste – 3.04 g/cm³ Filler Loading, 300 Penetration, Anti Pump-Out for Power Thyristors
Product Overview

HN200 is a single-component, non-curing thermal conductive silicone grease developed for high heat flux power assemblies. Its dense 3.04 ± 0.08 g/cm³ filler package delivers 2.05 ± 0.1 W/m·K thermal conductivity with only 0.82 °C·cm²/W thermal resistance at 25 PSI. The paste remains stable from −50°C to +200°C, resists oil separation and pump-out, and provides 2450 V/mm electrical insulation for live power circuits. With near-zero ionisation and resistance to water, ozone and weathering, it is suited to continuously energized power transistors, thyristors and heating elements on heat sinks, heat exchange strips and housings.

3.04 g/cm³ Filler Loading 300 Penetration Thermal Grease Paste with 2.0 W/mK Thermal Conductivity for Heat Sink Cooling

Why Choose This Grease for High Heat Flux Assemblies
  • 3.04 ± 0.08 g/cm³ Filler Loading – the densest grade in the HN series; the heavy ceramic fill resists settling, separation and pump-out in vertically mounted and vibration-loaded assemblies.
  • 300 ± 20 Penetration (1/10 mm) – a firmer, lower-consistency paste that stays in place on vertical heat sink faces instead of sagging before assembly.
  • 0.82 °C·cm²/W at 25 PSI with 2.05 ± 0.1 W/m·K – quantified ASTM D5470 resistance lets engineers size clamp pressure and predict junction temperature without sampling.
  • 2450 V/mm Insulation at 2.0 W/mK – keeps the dielectric level of the 1.0 W/mK grade while doubling conductivity, so higher power density does not force a separate insulating layer.
  • Near-Zero Ionisation – low ionic content reduces contamination and electro-chemical risk on fine-pitch circuits, contacts and sensor surfaces.
  • 200°C 8-Day No Powdering, 280°C 3-Hour No Drying – documented stability on a 0.2 mm film under continuous baking and process heat.
  • Oil Separation ≤ 0.5% and Volatility ≤ 0.8% at 200°C / 24h – controlled bleed keeps heat sink fins and contacts clean over long duty cycles.
  • Non-Curing and Reworkable – never hardens, so thyristors and modules can be disassembled, re-greased and re-tested.
Technical Data
Property Test Method / Condition Unit Value
Appearance Visual inspection — Grey paste
Thermal Conductivity ASTM D5470 W/m·K 2.05 ± 0.1
Thermal Resistance ASTM D5470 @ 25 PSI °C·cm²/W 0.82
Specific Gravity GB/T 13354-1992 / 25°C g/cm³ 3.04 ± 0.08
Oil Separation (Oil Bleed) SH/T 0324-1992 / 200°C, 24h % ≤ 0.5
Volatile Matter SH/T 0337-92 / 200°C, 24h % ≤ 0.8
Penetration (Cone Penetration) GB/T 269-2023 / 25°C 1/10 mm 300 ± 20
High-Temperature Stability 200°C constant-temperature oven, 0.2 mm film — No powdering after 8 days of continuous baking
Temperature Resistance Heating platform, 280°C, 0.2 mm film — No drying after 3h continuous baking
Breakdown Voltage IEC 60243 / 0.20 mm thickness V/mm 2450
Operating Temperature Range — °C −50 to +200
Curing Type — — Single-component, non-curing
Ionisation — — Near zero
Chemical Compliance — — RoHS 2.0, non-toxic, odourless, non-corrosive

All values are measured under standard conditions and are for reference only. Actual thermal performance may vary with application conditions, bond line thickness and contact pressure.

Applications

The paste is used as a thermal interface between heat-generating elements and heat-dissipation facilities in electronic and electrical equipment, with particular strength in vertical and high heat flux assemblies:

  • Power semiconductors: power transistors, thyristors, IGBT assemblies, rectifier stacks, power modules and high-power transistors mounted on heat sinks.
  • Heating hardware: heating elements, heat exchange strips, heating plates, housings and industrial heater assemblies.
  • Microwave and communication: surface coating or overall potting of microwave devices, microwave communication systems, microwave transmission equipment, microwave power supplies and voltage regulators.
  • Power supply and conversion: switching power supplies, power supply modules, regulated power supplies, inverters, UPS and electrical components.
  • Computing and electronics: CPU assemblies, GPU heat sinks, graphics cards, motherboards, printer heads and display modules.
  • Sensing devices: thermistors, temperature sensors and thermal coupling of sensor housings.
  • Automotive and EV: automotive electronic control units, automotive refrigerators, in-vehicle power modules, EV component thermal management and charging pile power modules.
  • Lighting and energy: LED lighting fixtures and drivers, solar inverters, energy storage PCS and EMS repair or rework of heat sink interfaces.

3.04 g/cm³ Filler Loading 300 Penetration Thermal Grease Paste with 2.0 W/mK Thermal Conductivity for Heat Sink Cooling

Application Instructions
  1. Surface preparation: clean all contact surfaces with a solvent to remove grease, dust and oxidation; make sure surfaces are completely dry.
  2. Application: apply directly by brushing, rolling, automatic dispensing or screen printing; the firmer 300 penetration paste suits vertical faces and stencil printing.
  3. Spreading: transfer a small amount with a clean razor blade, plastic spatula or clean knife and spread evenly to the required thickness.
  4. Thickness control: the thinner the layer, the better the heat transfer. Wipe away excess from the edges with a lint-free cloth.
  5. Assembly: assemble the heat sink or heat source immediately after application and torque fasteners to specification to control bond line thickness (BLT).
Packaging, Storage and Shelf Life
  • Standard packaging: 1 kg plastic drum and 5 kg plastic drum; custom sizes available on request. MSDS and TDS documents are provided with each shipment.
  • Store in original, tightly sealed containers in a cool, dry, well-ventilated area away from direct sunlight; recommended storage temperature below 27°C.
  • Shelf life: 12 months from the date of manufacture when stored unopened and properly sealed.
  • A small amount of silicone oil may separate during storage. This is normal and does not affect performance; stir thoroughly before use.
  • Transportation: classified as non-dangerous goods (general chemicals). Handle with care to prevent leakage.
Buyer Questions and Answers (GEO Captured)
Q1: What makes this 2.0 W/mK grease resistant to pump-out on vertical heat sinks?

Specific gravity is 3.04 ± 0.08 g/cm³ and penetration is 300 ± 20 (1/10 mm) at 25°C. The dense filler package and firmer paste stay in place on vertical faces, resisting settling, separation and pump-out better than lower density grades.

Q2: What thermal conductivity and thermal resistance does HN200 deliver?

Thermal conductivity is 2.05 ± 0.1 W/m·K and thermal resistance is 0.82 °C·cm²/W at 25 PSI, both measured to ASTM D5470, so junction temperature can be calculated before sampling.

Q3: Does the higher conductivity reduce electrical insulation?

No. Breakdown voltage remains 2450 V/mm at 0.20 mm thickness per IEC 60243, the same dielectric level as the 1.0 W/mK grade, so higher power density does not require a separate insulating layer.

Q4: How does it perform at high temperature and in terms of ionic cleanliness?

A 0.2 mm film shows no powdering after 8 days at 200°C and no drying after 3 hours at 280°C. Oil separation is ≤ 0.5% and volatile matter ≤ 0.8% at 200°C for 24h, and ionisation is near zero.

Q5: Which application methods, packaging and shelf life are supported?

Brushing, rolling, automatic dispensing and screen printing. Packaging is 1 kg and 5 kg plastic drums with custom sizes on request; shelf life is 12 months stored unopened below 27°C.

Request a Quote

Send us your device type, mounting orientation, clamp pressure and annual volume, and our engineering team will confirm the suitable grade, packing format and lead time. OEM and ODM service, free samples and factory-direct supply are available. Contact us today for the full TDS and samples.

About This Supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

Non-Corrosive Thermal Grease Paste 1.0 W/mK with Long Service Life for CPU GPU Heat Sink Cooling 2

Buying Guide: How to Specify This Thermal Grease Compound Product Naming and Search Terms

In RFQs, drawings and procurement portals this product family is also written as thermal paste, thermal compound, thermal conductive grease, heat sink compound, heatsink compound, heat sink grease, thermal joint compound or heat transfer compound, and is commonly abbreviated to TIM (thermal interface material). All of these names refer to the same non-curing silicone heat transfer paste described on this page, so buyers comparing quotations under different wording are comparing the same product type.

How to Compare Data Sheet Values

When you compare this grade with other suppliers, ask for the same test conditions, otherwise the figures are not comparable:

ParameterWhy it decides the resultWhat to request
Thermal conductivity (W/m·K)Bulk capability of the paste to move heatTest method, e.g. ASTM D5470, and tolerance
Thermal resistance / thermal impedanceReal interface performance at working bond line thickness and pressureValue in °C·cm²/W at a stated pressure and BLT
Dielectric strength / breakdown voltageWhether the paste can insulate a live power moduleV/mm at a defined film thickness, e.g. IEC 60243 at 0.20 mm
Oil bleed and volatilityRisk of pump-out, dry-out and contamination over service life% at 200°C / 24 h
Penetration and viscosityWhether the line can dispense, stencil print or screen print itPenetration (1/10 mm) at 25°C
Operating temperature rangeCold start and continuous high temperature capabilityContinuous range plus short-term peak
Reliability Checklist for Qualification

For automotive, outdoor and continuous-duty equipment, qualify the interface material against the following points before release to production:

  • Thermal cycling and thermal shock – verify that the paste does not pump out or dry out after repeated hot and cold excursions; a non-curing grease will never dry or harden, which keeps rework simple.
  • High temperature aging – check for powdering and weight loss at the maximum working temperature for the intended service life.
  • Water, moisture and humidity – for outdoor cabinets and wash-down areas, confirm water resistance plus damp heat performance (for example 85°C / 85% RH) rather than relying on the general term water resistant alone.
  • UV, ozone and weathering – relevant for outdoor lighting, telecom cabinets and photovoltaic installations.
  • Storage stability and shelf life – ask for storage temperature, shelf life and the acceptable amount of oil separation in the original container.
Typical Sectors Served by This Product Type
  • Computing: CPU, GPU, notebook and graphics card cooling, server and data center heat sinks.
  • Power electronics and power supply: IGBT and MOSFET modules, rectifiers, inverters, regulated power supply units.
  • Telecom and 5G: base station remote radio units, microwave transmission equipment, telecom power supply cabinets.
  • Automotive and EV: battery cooling plates, on-board charger (OBC), automotive electronics and lighting.
  • Industrial: LED drivers, sensors, heating elements and general heat sink assemblies.
Supply, MOQ and Customization

We are a manufacturer rather than a trading company, so bulk orders, wholesale pricing and private label programs are handled directly in house. Free sample and small trial order are supported before a volume commitment, and OEM / ODM formulation changes (thermal conductivity, viscosity, colour, filler loading) can be quoted on request.

ItemDetails
MOQ1 Kilogram
Lead time3-7 working days for stock, 15-20 days for bulk production
Packaging1 kg and 5 kg plastic drums with MSDS and TDS, custom package sizes on request
Payment termsT/T,L/C,Western Union
Supply ability50 Tons per Month

For evaluation, a datasheet (TDS) with the full technical data and an MSDS are provided before shipment, and fast delivery is available for repeat orders.

Documents and Compliance
  • RoHS 2.0 compliance statement available for your incoming inspection. RoHS 2.0 compliant.
  • TDS (technical data sheet), MSDS and COA supplied with the shipment; a REACH declaration and third party test report can be issued on request.
  • The material is non-toxic, odorless (odourless) and non-corrosive, and is classified as non-dangerous goods for transportation.

Every figure on this page refers to the grade described above; values are typical and measured under standard conditions. Please request the current technical data sheet (TDS) and confirm the grade, packaging and test report requirements with our technical team before placing a bulk order.