HN600 Ultra-Low Thermal Resistance Thermal Grease is a single-component, non-curing, metal-filled silicone grease built for high-power thermal interfaces. Its metal-filled filler system and low bond line thickness cut contact thermal resistance between heat source and heat sink, keeping GPUs, CPUs, PLCs and power electronics stable under continuous load. Operating range −40 °C to +200 °C, RoHS 2.0, halogen-free and REACH compliant.
6.05 W/mKThermal conductivity
Metal-filledLow BLT filler system
−40~+200 °COperating range
≤0.3%Oil separation
Product Description
HN600 is a single-component, non-curing thermal grease engineered for ultra-low thermal resistance in high-power thermal interface applications. Its metal-filled formulation and low bond line thickness (BLT) work together to minimise contact thermal resistance between heat sink and heat source, delivering stable heat transfer on temperature-sensitive devices such as GPUs, CPUs and PLCs.
With 6.05 ± 0.1 W/m·K conductivity, low oil separation (≤0.3%) and low volatile matter (≤0.7%) at 200 °C for 24 hours, HN600 keeps the interface clean and thermally stable through long duty cycles. The paste stays soft and non-curing from −40 °C to +200 °C, so rework and re-assembly remain simple.
It is supplied in 1 kg and 5 kg plastic drums, sealed with a desiccant bag and packed in export-grade cartons, with custom sizes available on request.
Why Choose HN600
- Ultra-low thermal resistance: metal-filled fillers plus low BLT minimise the interface barrier where it matters most.
- Benchmarked against premium grades: performance positioned against Dow TC-5888 and Shin-Etsu XY-23-7921 class products.
- High-temperature endurance: stable operation from −40 °C up to +200 °C without hardening.
- Non-curing and reworkable: the paste never sets, so components can be disassembled and re-applied without scraping.
- Clean interface: low oil bleed and low volatility protect boards, sockets and inspection optics.
- Compliance ready: RoHS 2.0, halogen-free and REACH compliant for export markets.
Technical Parameters
| Property | Test Method / Condition | Unit | Value |
| Appearance | Visual inspection | — | Grey, glossy, fine paste |
| Thermal Conductivity | ASTM D5470 | W/m·K | 6.05 ± 0.1 |
| Filler System | — | — | Metal-filled |
| Specific Gravity | GB/T 13354-1992 / 25 °C | g/cm³ | 2.8 ± 0.1 |
| Oil Separation | SH/T 0324-1992 / 200 °C, 24 h | % | ≤ 0.3 |
| Volatile Matter | SH/T 0337-92 / 200 °C, 24 h | % | ≤ 0.7 |
| Penetration (Cone Penetration) | GB/T 269-2023 / 25 °C | 1/10 mm | 260 ± 20 |
| Operating Temperature Range | — | °C | −40 to +200 |
| Shelf Life | Unopened, sealed | months | 12 |
Typical Applications
- High-end CPU and GPU thermal interfaces in desktop, workstation and server systems
- High-performance processors and integrated circuits
- Network communication equipment and base station modules
- Electrical control systems and on-board chargers (OBC)
- Automotive electronics and photovoltaic inverters
- PLCs and industrial drives requiring maximum heat transfer
Application Instructions
- Surface preparation: clean all contact surfaces with a solvent to remove grease, dust and oxidation; ensure surfaces are completely dry.
- Application: apply by brushing, rolling, automatic dispensing or screen printing.
- Spreading: transfer a small amount with a clean tool and spread evenly to the desired thickness.
- Thickness control: thinner layers transfer heat better; wipe excess from the edges with a lint-free cloth.
- Assembly: assemble the heat sink and heat source immediately and torque fasteners to specification for the correct bond line thickness.
Packaging and Storage
- Standard packages: 1 kg and 5 kg plastic drum, sealed with desiccant bag and packed in export-grade carton
- Store below 27 °C in a cool, dry, well-ventilated area away from direct sunlight
- Shelf life: 12 months from date of manufacture when unopened and properly sealed
- Stir before use if a small amount of silicone oil separates during storage; performance is not affected
Frequently Asked Questions
What is the thermal conductivity of HN600?6.05 ± 0.1 W/m·K measured by ASTM D5470, with ultra-low thermal resistance from a metal-filled filler system and low BLT.
How does it compare with Dow TC-5888?HN600 is positioned in the same high-conductivity class and is benchmarked against Dow TC-5888 and Shin-Etsu XY-23-7921 type products.
Does the paste cure?No. It is a single-component non-curing grease that stays paste-like and can be reworked at any time.
What is the operating temperature range?−40 °C to +200 °C, with volatile matter ≤0.7% after 200 °C for 24 hours.
Is it safe for sensitive electronics?Yes. Oil separation is ≤0.3%, and the product is halogen-free, RoHS 2.0 and REACH compliant.
What is the minimum order quantity and lead time?MOQ 1 kg; 3–7 working days for stock and 12–18 working days for bulk production, with 3000 kg per month supply capacity.
Which payment terms are accepted?T/T, D/A, D/P and Alipay.
Need an HN600 sample or bulk quotation?
Tell us your device, power density and target case temperature. We reply with a matched grade, TDS and MSDS within one working day.