HN200 High Thermal Conductive Silicone Grease is a single-component, non-curing insulating paste that pairs 2.05 W/m·K conductivity with 2450 V/mm dielectric strength. It keeps its paste consistency from −50 °C to +200 °C, resists water, ozone and weathering, and is RoHS 2.0 compliant — a balanced choice for LED drivers, CPU assemblies and power modules that need heat transfer and electrical safety at the same time.
2.05 W/mKThermal conductivity
2450 V/mmDielectric breakdown
0.82°C·cm²/W thermal resistance
−50~+200 °COperating range
Product Description
This single-component, non-curing high thermal conductive silicone grease delivers a thermal conductivity above 2.0 W/m·K with excellent temperature resistance, oil separation resistance and easy application. It works reliably in both ambient and heated environments from −50 °C to +200 °C, combining good electrical insulation with efficient heat transfer.
The compound shows near-zero ionisation and resists high and low temperatures, water, ozone and weathering. It remains soft and reworkable in service, spreads easily by brush, stencil or automatic dispensing, and is safe, non-toxic, odourless, non-corrosive and RoHS 2.0 compliant.
Standard packaging is 1 kg and 5 kg plastic drums sealed with a desiccant bag; custom sizes are available on request.
Why Choose HN200
- Insulation and conduction together: 2450 V/mm breakdown voltage at 0.20 mm allows direct contact with live electronics.
- Low interface resistance: 0.82 °C·cm²/W at 25 PSI keeps case temperatures in check at moderate pressure.
- Wide temperature window: −50 °C to +200 °C, with no powdering after 8 days at 200 °C.
- High filler loading: 3.04 g/cm³ specific gravity reflects a dense filler package for stable conductivity.
- Clean and stable: oil separation ≤0.5% and volatile matter ≤0.8% at 200 °C for 24 hours.
- Non-curing: the paste never hardens, so assemblies can be opened and re-applied without scraping.
Technical Parameters
| Property | Test Method / Condition | Unit | Value |
| Appearance | Visual inspection | — | Grey paste |
| Thermal Conductivity | ASTM D5470 | W/m·K | 2.05 ± 0.1 |
| Thermal Resistance | ASTM D5470 @ 25 PSI | °C·cm²/W | 0.82 |
| Specific Gravity | GB/T 13354-1992 / 25 °C | g/cm³ | 3.04 ± 0.08 |
| Oil Separation | SH/T 0324-1992 / 200 °C, 24 h | % | ≤ 0.5 |
| Volatile Matter | SH/T 0337-92 / 200 °C, 24 h | % | ≤ 0.8 |
| Penetration (Cone Penetration) | GB/T 269-2023 / 25 °C | 1/10 mm | 300 ± 20 |
| Breakdown Voltage | IEC 60243 / 0.20 mm thickness | V/mm | 2450 |
| High-Temperature Stability | 200 °C oven, 0.2 mm film | — | No powdering after 8 days |
| Temperature Resistance | 280 °C heating platform, 0.2 mm film | — | No drying after 3 h |
| Operating Temperature Range | — | °C | −50 to +200 |
Typical Applications
- LED lamp and LED driver heat dissipation interfaces
- CPU assemblies, power modules and power supply components
- Transistors, thermistors and temperature sensors
- Automotive electronics and car refrigerator modules
- Microwave communication equipment and voltage regulators
- Industrial control boards requiring electrical insulation
Application Instructions
- Surface preparation: clean contact surfaces with solvent to remove grease, dust and oxidation; dry completely.
- Application: apply by brushing, rolling, screen printing or automatic dispensing.
- Spreading: transfer a small amount with a clean tool and spread evenly to the target thickness.
- Thickness control: thinner layers transfer heat better; wipe excess from edges with a lint-free cloth.
- Assembly: mount the heat sink immediately and torque fasteners to specification to control BLT.
Packaging and Storage
- Standard packages: 1 kg and 5 kg plastic drum sealed with desiccant bag, packed in export-grade carton
- Store below 27 °C in a cool, dry, ventilated area, protected from direct sunlight
- Shelf life: 12 months from date of manufacture when unopened and properly sealed
- Stir before use if a small amount of silicone oil separates during storage
Frequently Asked Questions
What is the thermal conductivity of HN200?2.05 ± 0.1 W/m·K by ASTM D5470, with 0.82 °C·cm²/W thermal resistance at 25 PSI.
Is it electrically insulating?Yes. Breakdown voltage is 2450 V/mm at 0.20 mm thickness according to IEC 60243.
What is the operating temperature range?−50 °C to +200 °C, with no powdering after 8 days at 200 °C and no drying after 3 hours at 280 °C.
Does it cure or dry out?No. It is a non-curing grease that keeps its paste consistency throughout service life.
Will oil bleed affect my device?Oil separation is ≤0.5% at 200 °C for 24 h. A small amount of separation in storage is normal; stir before use.
What is the minimum order quantity and lead time?MOQ 1 kg; 3–7 working days for stock items and 12–18 working days for bulk production.
Which payment terms are accepted?T/T, D/A, D/P and Alipay.
Need an HN200 sample or bulk quotation?
Share your device type, power level and insulation requirement. We reply with a matched grade, TDS and MSDS within one working day.