HN400 Ultra-High Thermal Conductive Silicone Grease uses a low thermal resistance filler system to reach 4.05 W/m·K in a fine, easily spread paste. It keeps its consistency from −50 °C to +200 °C, resists water, ozone and weathering, and is RoHS 2.0 compliant — built for CPU coolers, power modules and other high power density interfaces.
4.05 W/mKThermal conductivity
1100 V/mmDielectric breakdown
−50~+200 °COperating range
≤0.3%Oil separation
Product Description
This single-component, non-curing ultra-high thermal conductive silicone grease uses low thermal resistance fillers to reach a thermal conductivity of 4.05 W/m·K. The paste has a fine texture and good spreadability in its class, quickly and effectively lowering the temperature of heating elements.
It works in ambient conditions and heated scenarios from −50 °C to +200 °C, combining excellent thermal conductivity with near-zero free radical content and resistance to high and low temperatures, water, ozone and weathering. Low oil separation (≤0.3%) and low volatile matter (≤0.7%) at 200 °C for 24 hours keep the interface clean through long duty cycles. The product is RoHS 2.0 compliant.
Standard packaging is 1 kg and 5 kg plastic drums sealed with a desiccant bag; custom sizes are available on request.
Why Choose HN400
- High conductivity in a fine paste: 4.05 W/m·K with 240 ± 20 penetration, so it spreads thin and covers evenly.
- Low thermal resistance fillers: the filler package is optimised for bond line resistance, not just bulk conductivity numbers.
- Wide service window: stable from −50 °C to +200 °C with near-zero free radical content.
- Clean interface: oil separation ≤0.3% and volatile matter ≤0.7% at 200 °C for 24 hours.
- Non-curing and reworkable: no hardening, no scraping during service or re-assembly.
- RoHS 2.0 compliant for EU and North American export programmes.
Technical Parameters
| Property | Test Method / Condition | Unit | Value |
| Appearance | Visual inspection | — | Grey, glossy, fine paste |
| Thermal Conductivity | ASTM D5470 | W/m·K | 4.05 ± 0.1 |
| Filler System | — | — | Low thermal resistance fillers |
| Specific Gravity | GB/T 13354-1992 / 25 °C | g/cm³ | 2.61 ± 0.08 |
| Oil Separation | SH/T 0324-1992 / 200 °C, 24 h | % | ≤ 0.3 |
| Volatile Matter | SH/T 0337-92 / 200 °C, 24 h | % | ≤ 0.7 |
| Penetration (Cone Penetration) | GB/T 269-2023 / 25 °C | 1/10 mm | 240 ± 20 |
| Breakdown Voltage | IEC 60243 / 0.20 mm thickness | V/mm | 1100 |
| Operating Temperature Range | — | °C | −50 to +200 |
| Shelf Life | Unopened, sealed | months | 12 |
Typical Applications
- CPU cooler and GPU thermal interfaces in desktops, workstations and servers
- Power modules, IGBT heat spreaders and power supply components
- LED lighting engines and driver boards
- Telecom equipment and network devices
- Industrial control units and motor drives
- Consumer electronics requiring long-term thermal stability
Application Instructions
- Surface preparation: clean contact surfaces with solvent to remove grease, dust and oxidation; dry completely.
- Application: apply by brushing, rolling, screen printing or automatic dispensing.
- Spreading: the fine paste spreads easily with a razor blade or plastic spatula at minimum thickness.
- Thickness control: thinner layers transfer heat better; wipe excess from edges with a lint-free cloth.
- Assembly: mount the heat sink immediately and torque fasteners to specification to control BLT.
Packaging and Storage
- Standard packages: 1 kg and 5 kg plastic drum sealed with desiccant bag, packed in export-grade carton
- Store below 27 °C in a cool, dry, ventilated area, protected from direct sunlight
- Shelf life: 12 months from date of manufacture when unopened and properly sealed
- Stir before use if a small amount of silicone oil separates during storage
Frequently Asked Questions
What is the thermal conductivity of HN400?4.05 ± 0.1 W/m·K by ASTM D5470, using a low thermal resistance filler system.
Is HN400 electrically insulating?Breakdown voltage is 1100 V/mm at 0.20 mm thickness. It is not intended for direct coating of exposed live parts such as bare circuit boards.
What is the operating temperature range?−50 °C to +200 °C with stable paste consistency throughout.
Does the paste cure?No. It is a single-component non-curing grease and remains reworkable.
How thin should the layer be?Use the thinnest layer that guarantees full contact. Excess grease can reduce efficiency.
What is the minimum order quantity and lead time?MOQ 1 kg; 3–7 working days for stock and 12–18 working days for bulk production, 3000 kg per month capacity.
Which payment terms are accepted?T/T, D/A, D/P and Alipay.
Need an HN400 sample or bulk quotation?
Send your heat load, target temperature and assembly pressure. Our engineers reply with a matched grade, TDS and MSDS within one working day.