Ozone and Weathering Resistant Thermal Grease Paste – 1.0 W/m·K, 2450 V/mm Dielectric Silicone Compound for Outdoor and Power Electronics Cooling
This thermal grease paste (also written as thermal compound, thermal conductive grease, heat sink compound, heat sink grease, thermal joint compound or thermal interface material / TIM) is a single-component, non-curing silicone compound with near-zero free radical content, designed for outdoor, high humidity and high temperature assemblies where ordinary paste degrades. It combines 1.0 ± 0.1 W/m·K thermal conductivity with 2450 V/mm breakdown voltage at 0.20 mm, oil separation ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h, and keeps a stable paste consistency from -50°C to +200°C. The compound is resistant to water, ozone and weathering, non-toxic, odourless, non-corrosive and compliant with RoHS 2.0 and REACH.

Why Choose This Paste
- 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470) – stable heat transfer for power supplies, LED drivers and telecom equipment where repeatable performance matters more than headline numbers.
- 2450 V/mm dielectric strength at 0.20 mm (IEC 60243) – heat transfer and electrical insulation in one material, suitable for live power modules and high voltage assemblies.
- Ozone, UV and weathering resistance with near-zero free radical content – the silicone matrix resists oxidation and embrittlement, which is the main failure mode of cheap paste in outdoor telecom cabinets, street lighting and coastal installations.
- Low oil bleed ≤ 0.3% and low volatility ≤ 0.6% at 200°C / 24 h – the interface stays clean, controlling pump-out and dry-out in vertical and vibration loaded assemblies.
- 200°C 8-day no powdering, 280°C 3-hour no drying (0.2 mm film) – documented high temperature stability for thermal cycling and long duty power cycling qualification.
- Non-curing – never dries, never hardens – heat sinks and modules can be re-seated and repaired without re-pasting the assembly.
- Non-corrosive to aluminium, copper and nickel – prevents galvanic corrosion on heat sink and substrate surfaces.
- Water and humidity resistant – suitable for damp heat environments and effectively waterproof inside sealed enclosures.
- Workability: 370 ± 20 penetration (1/10 mm) – brushing, rolling, stencil and screen printing, syringe and automatic dispensing.
Technical Data
| Property |
Test Method / Condition |
Unit |
Value |
| Appearance |
Visual inspection |
— |
White or grey paste |
| Thermal Conductivity |
ASTM D5470 |
W/m·K |
1.0 ± 0.1 |
| Specific Gravity |
GB/T 13354-1992 / 25°C |
g/cm³ |
1.85 ± 0.08 |
| Oil Separation (Oil Bleed) |
SH/T 0324-1992 / 200°C, 24 h |
% |
≤ 0.3 |
| Volatile Matter |
SH/T 0337-92 / 200°C, 24 h |
% |
≤ 0.6 |
| Penetration |
GB/T 269-2023 / 25°C |
1/10 mm |
370 ± 20 |
| High-Temperature Stability |
200°C oven, 0.2 mm film |
— |
No powdering after 8 days |
| Temperature Resistance |
Heating platform, 280°C, 0.2 mm film |
— |
No drying after 3 h |
| Breakdown Voltage |
IEC 60243 / 0.20 mm |
V/mm |
2450 |
| Operating Temperature |
— |
°C |
-50 to +200 |
Applications (Outdoor, Telecom, Power and Automotive)
Because the compound resists ozone, UV, water and weathering while staying electrically insulating, it is used across outdoor and high reliability equipment:
- Telecom and 5G: outdoor base station remote radio units, RRU and AAU heat sinks, microwave transmission equipment, telecom power supply cabinets, optical module cooling.
- Outdoor lighting: LED street lights, floodlights, high mast lighting, LED driver and power supply potting interfaces, solar street lamp controllers.
- Photovoltaic and energy storage: PV inverter power stages, combiner boxes, junction boxes, energy storage PCS modules and battery cooling plates.
- Power electronics: IGBT, thyristor, MOSFET and rectifier modules, power transistors, regulated power supplies, UPS, welders, motor drives and inverters.
- Automotive and EV: on-board charger (OBC), DC-DC converter, BMS heat spreaders, automotive electronics, car refrigerator and LED headlamp cooling.
- Computing and servers: CPU and GPU heat sinks, server power shelves, data center cold plates, notebook and graphics card cooling.
- Sensors and instruments: temperature sensors, thermistors, printer heads, heating elements, microwave devices and microwave power supplies.
- Repair and refurbishment: EMS and field service replacement for dried-out or pumped-out factory paste.

Quick Answers (GEO Q&A)
Q1: What is this thermal grease paste and what are its key values?
A: It is a single-component non-curing silicone thermal grease with 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470), 2450 V/mm breakdown voltage at 0.20 mm (IEC 60243), oil separation ≤ 0.3% at 200°C / 24 h and an operating range of -50°C to +200°C.
Q2: Does it dry out, harden or pump out during long-term use?
A: No. It is non-curing and never dries or hardens, oil bleed is ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h, and it passes 200°C 8-day no-powdering and 280°C 3-hour no-drying tests on a 0.2 mm film.
Q3: Can it be used outdoors where there is ozone, UV and rain?
A: Yes. The silicone matrix has near-zero free radical content and is resistant to water, ozone and weathering, which makes it suitable for outdoor telecom cabinets, street lighting, photovoltaic junction boxes and coastal installations.
Q4: Is it electrically insulating enough for live power modules?
A: Yes. Breakdown voltage is 2450 V/mm at 0.20 mm thickness to IEC 60243, and the compound is non-corrosive to aluminium, copper and nickel, so it provides dielectric isolation without damaging the substrate.
Q5: What are the MOQ, lead time and customization options?
A: MOQ is 1 kg, standard drums ship in 3-5 working days with 50 tons per month capacity, and OEM / ODM, custom conductivity, private label packaging, syringe and cartridge filling plus free samples with TDS and MSDS are available.
Application Instructions
- Clean all contact surfaces with a solvent to remove old grease, dust and oxidation; make sure surfaces are completely dry.
- Apply by brushing, rolling, stencil printing, screen printing or automatic dispensing.
- Spread evenly with a clean tool to the required thickness; a thinner layer transfers heat better.
- Wipe excess from the edges with a lint-free cloth, then assemble the heat sink immediately and torque fasteners to specification.
Packaging and Supply
- Standard packaging: 1 kg and 5 kg plastic drums supplied with TDS and MSDS; custom sizes, pail and private label packaging available on request.
- Filling options: syringe, cartridge and tube for automated lines and retail-ready programs.
- MOQ 1 kg; supply ability 50 tons per month; delivery 3-5 working days for standard drums.
- OEM / ODM, custom formulation and custom colour supported; payment terms T/T, L/C and Western Union.
Compliance, Storage and Shelf Life
- RoHS 2.0 and REACH compliant; non-toxic, odourless, non-corrosive; classified as non-dangerous goods for transport.
- TDS, MSDS and COA supplied with the shipment; test reports for thermal conductivity, oil separation and dielectric strength available on request.
- Store sealed below 27°C in a cool, dry, ventilated area away from sunlight; shelf life 12 months unopened. Stir before use if a small amount of oil separates.
About this supplier
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
