Wide Temperature Thermal Grease Paste – 1.0 W/m·K, 2450 V/mm Insulating Silicone Compound for Server Power, Data Center and High Voltage Heat Sinks
This thermal grease paste (also written as thermal compound, thermal conductive grease, heat sink compound, heat sink grease, thermal joint compound or thermal interface material / TIM) is a single-component, non-curing silicone compound engineered for equipment that runs continuously across a wide temperature span. It provides 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470), 2450 V/mm breakdown voltage at 0.20 mm (IEC 60243), oil separation ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h, and holds its paste consistency from -50°C cold start to +200°C operating temperature. With near-zero free radical content and resistance to water, ozone and weathering, it protects the interface against oxidation and embrittlement in 24/7 duty equipment. The material is non-toxic, odourless, non-corrosive and compliant with RoHS 2.0 and REACH.

Why Choose This Paste
- 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470) – repeatable heat transfer for server power shelves, heat sinks and high voltage assemblies where the interface must stay stable for years.
- 2450 V/mm dielectric strength at 0.20 mm (IEC 60243) – heat transfer plus electrical insulation in one layer, suitable for high voltage insulating joints in power supplies and rectifier stacks.
- Wide temperature range -50°C to +200°C – covers cold start in unheated facilities and high temperature operation near power components without hardening.
- Non-curing – never dries, never hardens – heat sinks can be re-seated during upgrades, RMA and field service without scraping paste.
- Low oil bleed ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h – controls pump-out in vertically mounted server racks and air-flow loaded assemblies.
- 200°C 8-day no powdering, 280°C 3-hour no drying (0.2 mm film) – documented high temperature stability for continuous duty and high temperature ageing tests.
- Near-zero free radical content with ozone and weathering resistance – resists oxidation, UV and ozone attack, extended service life under permanent load.
- Non-corrosive to aluminium, copper and nickel – protects plated heat sinks and prevents galvanic corrosion at the joint.
- Workability: 370 ± 20 penetration (1/10 mm) – brushing, roller application, screen printing, syringe and automatic dispensing for high volume assembly.
- Water and humidity resistant – stable in damp heat and effectively waterproof inside sealed enclosures.
Technical Data
| Property |
Test Method / Condition |
Unit |
Value |
| Appearance |
Visual inspection |
— |
White or grey paste |
| Thermal Conductivity |
ASTM D5470 |
W/m·K |
1.0 ± 0.1 |
| Specific Gravity |
GB/T 13354-1992 / 25°C |
g/cm³ |
1.85 ± 0.08 |
| Oil Separation (Oil Bleed) |
SH/T 0324-1992 / 200°C, 24 h |
% |
≤ 0.3 |
| Volatile Matter |
SH/T 0337-92 / 200°C, 24 h |
% |
≤ 0.6 |
| Penetration |
GB/T 269-2023 / 25°C |
1/10 mm |
370 ± 20 |
| High-Temperature Stability |
200°C oven, 0.2 mm film |
— |
No powdering after 8 days |
| Temperature Resistance |
Heating platform, 280°C, 0.2 mm film |
— |
No drying after 3 h |
| Breakdown Voltage |
IEC 60243 / 0.20 mm |
V/mm |
2450 |
| Operating Temperature |
— |
°C |
-50 to +200 |
Applications (Server, Data Center and Wide Temperature)
The compound is used as the thermal interface between heat generating elements and heat dissipation facilities in electronic and electrical equipment, with focus on continuous duty and wide temperature installations:
- Servers and data centers: CPU and GPU heat sinks, server power supply shelves, 1U and 2U cooling assemblies, cold plates, rack power distribution units and data center thermal management.
- Power supplies and adapters: switching power supplies, AC-DC and DC-DC modules, adapters, rectifiers, regulator boards and high voltage insulating interfaces.
- Telecom and networking: base station power cabinets, switch and router heat sinks, optical module cooling, 5G remote radio units.
- Power electronics: IGBT and MOSFET modules, thyristors, power transistors, solid state relays, inverters and motor drives.
- Industrial and outdoor equipment: UPS, welding machines, LED driver power stages, photovoltaic inverters, energy storage modules and outdoor cabinets exposed to ozone and weathering.
- Automotive and EV electronics: on-board charger (OBC) stages, DC-DC converters, BMS heat spreaders and battery cooling plates.
- Sensors and instruments: temperature sensors, thermistors, printer heads, heating elements and microwave devices.
- Repair and refurbishment: replacing dried-out factory paste on heat sinks, power modules and CPU coolers.

Quick Answers (GEO Q&A)
Q1: What is this wide temperature thermal grease and what are its key values?
A: A single-component non-curing silicone thermal grease with 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470), 2450 V/mm breakdown voltage at 0.20 mm (IEC 60243), oil separation ≤ 0.3% at 200°C / 24 h and an operating range of -50°C to +200°C.
Q2: Is it stable for 24/7 server and data center duty?
A: Yes. It is non-curing and never dries or hardens, oil bleed and volatility are controlled at 200°C / 24 h, and it passes 200°C 8-day no-powdering testing, which is what keeps the interface stable in continuously running racks.
Q3: Does the paste handle cold starts and high temperature at the same time?
A: The rated range is -50°C to +200°C, so it remains a paste at low ambient temperature and does not dry out at the high temperature side of the specified range.
Q4: Is it insulating enough for high voltage power supplies?
A: Breakdown voltage is 2450 V/mm at 0.20 mm thickness to IEC 60243, and the compound is non-corrosive to aluminium, copper and nickel, so it can be used on high voltage insulating joints.
Q5: What are the MOQ, delivery and customization options?
A: MOQ is 1 kg (1 drum), standard drums ship in 3-5 working days with 50 tons per month capacity, and OEM / ODM, custom conductivity, private label and syringe or cartridge filling plus free samples with TDS and MSDS are available.
Application Instructions
- Clean the heat sink and the heat source with a solvent to remove old grease, oxide and dust; allow to dry fully.
- Apply a thin and even film by brush, roller, screen printing or automatic dispensing.
- Assemble immediately and torque the fasteners to specification to keep the bond line thin and uniform.
- Remove excess material from the edges with a lint-free cloth before final assembly.
Packaging and Supply
- Standard packaging: 1 kg and 5 kg plastic drums supplied with TDS and MSDS; custom sizes, pail and private label packaging on request.
- Filling options: syringe, cartridge and tube for production lines and service kits.
- MOQ 1 kg; supply ability 50 tons per month; delivery 3-5 working days for stock and 12-18 working days for bulk production.
- OEM / ODM, custom formulation and private label supported; payment terms T/T, L/C and Western Union.
Compliance, Storage and Shelf Life
- RoHS 2.0 and REACH compliant; non-toxic, odourless, non-corrosive; classified as non-dangerous goods for transport.
- TDS, MSDS and COA supplied with the shipment; test reports for thermal conductivity, oil separation and dielectric strength available on request.
- Store sealed below 27°C in a cool, dry, ventilated area away from direct sunlight; shelf life 12 months unopened. Stir before use if a small amount of oil separates.
About this supplier
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
