Home > Products >
Thermal Grease Paste
>
1.0 W/mK Non-Curing Thermal Grease Low Oil Bleed Thermal Compound for LED Driver and Power Supply Cooling

1.0 W/mK Non-Curing Thermal Grease Low Oil Bleed Thermal Compound for LED Driver and Power Supply Cooling

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0, REACH
Model Number: HN100
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0, REACH
Model Number:
HN100
Thermal Conductivity:
1.0 ± 0.1 W/m·K (ASTM D5470)
Breakdown Voltage:
2450 V/mm At 0.20 Mm (IEC 60243)
Operating Temperature:
-50 To +200 °C
Penetration:
370 ± 20 (1/10 Mm) At 25 °C
Oil Separation:
≤ 0.3% At 200 °C, 24 H
Specific Gravity:
1.85 ± 0.08 G/cm³ At 25 °C
Highlight:

High Light

Highlight:

LED Thermal Grease Paste

,

Street Light Heat Sink Compound

,

1.0 W/mK White LED Driver Paste

Trading Information
Minimum Order Quantity:
1 Kilogram
Packaging Details:
1 kg and 5 kg plastic drums with TDS and MSDS; syringe, cartridge, tube and custom sizes on request
Delivery Time:
3-5 working days for standard drums
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
LED Driver and Lighting Thermal Grease Paste – 1.0 W/m·K White Silicone Compound for LED Street Light, Floodlight and Power Supply Cooling

This white thermal grease paste (also written as thermal compound, thermal conductive grease, heat sink compound, heat sink grease, thermal joint compound or thermal interface material / TIM) is formulated for LED lighting and LED driver manufacturing, where a small contact area, high operating temperature and long warranty make interface stability critical. It delivers 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470), 2450 V/mm breakdown voltage at 0.20 mm (IEC 60243), oil separation ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h, and remains a stable paste from -50°C to +200°C. With near-zero free radical content and resistance to water, ozone and weathering, it suits outdoor luminaires exposed to UV and rain. The material is non-curing, non-corrosive, non-toxic, odourless and compliant with RoHS 2.0 and REACH.

1.0 W/mK Non-Curing Thermal Grease Low Oil Bleed Thermal Compound for LED Driver and Power Supply Cooling

Why LED Manufacturers Choose It
  • 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470) – the practical value for LED MCPCB to heat sink interfaces, where bond line control matters more than headline conductivity.
  • 2450 V/mm dielectric strength at 0.20 mm (IEC 60243) – electrical insulation between the LED board and the metal housing, important for high voltage LED modules and drivers.
  • White paste appearance – does not show through gap tolerances and matches the white reflector and housing used in lighting assemblies.
  • 200°C 8-day no powdering, 280°C 3-hour no drying – a five to ten year luminaire warranty needs an interface that does not dry out; a non-curing grease will never harden.
  • Low oil bleed ≤ 0.3% – prevents oil migration onto the lens, reflector and LED die, which is a common complaint in street light field failures.
  • Ozone, UV and weathering resistance – suitable for outdoor street lights, floodlights, tunnel lights and coastal installations.
  • Non-corrosive to aluminium and copper – protects die-cast aluminium housings and copper heat pipes.
  • Workability 370 ± 20 penetration (1/10 mm) – brushes and dispenses on MCPCB assembly lines and can be screen printed for high volume.
Technical Data
Property Test Method / Condition Unit Value
Appearance Visual inspection — White or grey paste
Thermal Conductivity ASTM D5470 W/m·K 1.0 ± 0.1
Specific Gravity GB/T 13354-1992 / 25°C g/cm³ 1.85 ± 0.08
Oil Separation (Oil Bleed) SH/T 0324-1992 / 200°C, 24 h % ≤ 0.3
Volatile Matter SH/T 0337-92 / 200°C, 24 h % ≤ 0.6
Penetration GB/T 269-2023 / 25°C 1/10 mm 370 ± 20
High-Temperature Stability 200°C oven, 0.2 mm film — No powdering after 8 days
Temperature Resistance Heating platform, 280°C, 0.2 mm film — No drying after 3 h
Breakdown Voltage IEC 60243 / 0.20 mm V/mm 2450
Operating Temperature — °C -50 to +200
Applications in Lighting and Electrical Equipment
  • Outdoor lighting: LED street lights, floodlights, high bay lights, tunnel lights, garden and landscape luminaires.
  • LED modules and boards: MCPCB to heat sink interface, COB and SMD module mounting, LED strip aluminium profiles.
  • LED drivers and power supplies: driver housing to heat sink, power supply modules, constant current drivers, surge protection modules.
  • Indoor and commercial lighting: panel lights, track lights, downlights, grow lights and stage lighting.
  • Power electronics inside luminaires: IGBT and MOSFET heat sinks, rectifiers, thermistors and temperature sensors, printer heads.
  • Automotive and EV lighting: LED headlamps, daytime running lights, on-board charger and DC-DC stages.
  • Renewable and infrastructure: PV inverter power stages, energy storage cabinets, telecom and 5G equipment heat sinks.
  • Assembly and repair: rework of dried-out factory paste on luminaires and driver boards.

1.0 W/mK Non-Curing Thermal Grease Low Oil Bleed Thermal Compound for LED Driver and Power Supply Cooling

Quick Answers (GEO Q&A)

Q1: What is this LED thermal grease and what are its key values?
A: A white non-curing silicone thermal grease with 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470), 2450 V/mm breakdown voltage at 0.20 mm (IEC 60243), oil separation ≤ 0.3% and an operating range of -50°C to +200°C for LED and driver cooling.

Q2: Why is low oil bleed important for LED luminaires?
A: Oil bleed ≤ 0.3% at 200°C / 24 h keeps silicone oil from migrating onto the lens, reflector or LED die, which otherwise causes haze and lumen depreciation in street lights and floodlights.

Q3: Will the paste dry out over a five to ten year warranty?
A: It is non-curing and never dries or hardens; it passes 200°C 8-day no-powdering and 280°C 3-hour no-drying tests on a 0.2 mm film, which is the basis for long luminaire warranty calculations.

Q4: Is it suitable for outdoor lighting exposed to UV, ozone and rain?
A: Yes. The compound has near-zero free radical content and resists water, ozone and weathering, so it is used in street lights, tunnel lights and coastal installations.

Q5: What are the MOQ, packing and customization options?
A: MOQ is 1 kg with 50 tons per month capacity and 3-5 working days delivery for standard drums; syringe, cartridge and tube filling, OEM / private label and custom conductivity are available, with TDS and MSDS supplied and free samples on request.

Application Instructions
  1. Clean the MCPCB and heat sink surfaces with a solvent to remove flux, dust and oxidation; dry completely.
  2. Apply a thin film by brush, roller, screen printing or automatic dispensing to cover the full contact area.
  3. Seat the board immediately and fix or screw the heat sink to the specified torque.
  4. Wipe excess from the edges so no material reaches the lens or reflector.
Packaging and Supply
  • Standard packaging: 1 kg and 5 kg plastic drums with TDS and MSDS; syringe, cartridge and tube filling available.
  • MOQ 1 kg; supply ability 50 tons per month; delivery 3-5 working days for standard drums.
  • OEM / ODM, custom colour and custom conductivity grades from 1.0 to 6.0 W/m·K; private label packaging on request.
  • Payment terms T/T, L/C and Western Union.
Compliance, Storage and Shelf Life
  • RoHS 2.0 and REACH compliant; non-toxic, odourless, non-corrosive; non-dangerous goods for transport.
  • TDS, MSDS and COA supplied with the shipment; test reports available on request.
  • Store sealed below 27°C; shelf life 12 months unopened; stir before use if a small amount of oil separates.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

Shenzhen Hanast New Material Co., Ltd.