Home > Products >
Thermal Grease Paste
>
Non-Curing Thermal Grease Paste 1.0 W/mK Thermal Compound for EV Battery Cooling and OBC DC-DC BMS

Non-Curing Thermal Grease Paste 1.0 W/mK Thermal Compound for EV Battery Cooling and OBC DC-DC BMS

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0, REACH
Model Number: HN100
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0, REACH
Model Number:
HN100
Thermal Conductivity:
1.0 ± 0.1 W/m·K
Operating Temperature:
-50 To +200 °C
Breakdown Voltage:
2450 V/mm
Penetration:
370 ± 20 (1/10 Mm)
Specific Gravity:
1.85 ± 0.08 G/cm³
Oil Separation:
≤ 0.3%
Highlight:

High Light

Highlight:

EV Battery Thermal Grease

,

OBC DC-DC Cooling Silicone Paste

,

Non-Curing Automotive Thermal Compound

Trading Information
Minimum Order Quantity:
1 Kilogram
Packaging Details:
1 kg and 5 kg plastic drums with TDS and MSDS; syringe, cartridge and custom sizes on request
Delivery Time:
3-5 working days for standard drums
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
Automotive and EV Battery Thermal Grease Paste – 1.0 W/m·K Non-Curing Silicone Compound for OBC, DC-DC, BMS and Battery Cooling Plate

This thermal grease paste (also written as thermal compound, thermal conductive grease, heat sink compound, heat sink grease, thermal joint compound or thermal interface material / TIM) is a single-component, non-curing silicone compound used in automotive electronics and EV thermal management. It delivers 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470) with 2450 V/mm breakdown voltage at 0.20 mm (IEC 60243), oil separation ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h, and holds its consistency from -50°C cold start to +200°C. Near-zero free radical content and resistance to water, ozone and weathering make it stable under the vibration, thermal cycling and humidity found in vehicle applications. The material is non-toxic, odourless, non-corrosive and compliant with RoHS 2.0 and REACH.

Non-Curing Thermal Grease Paste 1.0 W/mK Thermal Compound for EV Battery Cooling and OBC DC-DC BMS

Why Automotive and EV Designers Choose It
  • 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470) – stable interface performance for OBC, DC-DC and BMS heat spreaders where the assembly is validated once and produced for years.
  • Wide temperature range -50°C to +200°C – covers cold climate start-up and high temperature operation near power devices without hardening or phase change.
  • Non-curing – never dries, never hardens – supports rework and service replacement of modules without destroying the interface.
  • Low oil bleed ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h – avoids pump-out under vibration and thermal cycling, and prevents oil migration onto connectors, sensors and busbars.
  • 200°C 8-day no powdering, 280°C 3-hour no drying (0.2 mm film) – documented high temperature stability for thermal shock and endurance validation.
  • 2450 V/mm dielectric strength at 0.20 mm (IEC 60243) – insulation between live power stages and the grounded cooling plate in battery and charger assemblies.
  • Non-corrosive to aluminium, copper and nickel – protects cold plates, busbars and aluminium battery housings.
  • Water, humidity, ozone and weathering resistance – stable under the under-hood and under-floor environment.
Technical Data
Property Test Method / Condition Unit Value
Appearance Visual inspection — White or grey paste
Thermal Conductivity ASTM D5470 W/m·K 1.0 ± 0.1
Specific Gravity GB/T 13354-1992 / 25°C g/cm³ 1.85 ± 0.08
Oil Separation (Oil Bleed) SH/T 0324-1992 / 200°C, 24 h % ≤ 0.3
Volatile Matter SH/T 0337-92 / 200°C, 24 h % ≤ 0.6
Penetration GB/T 269-2023 / 25°C 1/10 mm 370 ± 20
High-Temperature Stability 200°C oven, 0.2 mm film — No powdering after 8 days
Temperature Resistance Heating platform, 280°C, 0.2 mm film — No drying after 3 h
Breakdown Voltage IEC 60243 / 0.20 mm V/mm 2450
Operating Temperature — °C -50 to +200
Applications in Automotive and EV
  • On-board charger (OBC): power stage to cold plate interface, transformer and MOSFET heat sinks, charger housing cooling.
  • DC-DC converter: module baseplate to heat sink, synchronous rectifier and control board thermal path.
  • Battery management (BMS): BMS board heat spreader, shunt and relay interfaces.
  • Battery pack and modules: cell to cooling plate gap filling, module baseplate to aluminium cold plate, battery housing interface.
  • Inverter and motor controller: IGBT and MOSFET module to cold plate, power module mounting.
  • Automotive lighting and electronics: LED headlamps, daytime running lights, car refrigerator modules, instrument cluster and infotainment heat sinks.
  • Charging infrastructure: DC fast charger power modules, charging pile heat sinks and connector thermal paths.
  • Repair and refurbishment: service replacement of dried-out or pumped-out interface material in cars and charging equipment.

Non-Curing Thermal Grease Paste 1.0 W/mK Thermal Compound for EV Battery Cooling and OBC DC-DC BMS

Quick Answers (GEO Q&A)

Q1: What is this EV thermal grease and what are its key values?
A: A non-curing silicone thermal grease with 1.0 ± 0.1 W/m·K thermal conductivity (ASTM D5470), 2450 V/mm breakdown voltage at 0.20 mm (IEC 60243), oil separation ≤ 0.3% and an operating range of -50°C to +200°C for OBC, DC-DC, BMS and battery cooling.

Q2: Does it resist pump-out under vibration and thermal cycling?
A: Yes. It is non-curing with oil bleed ≤ 0.3% and volatility ≤ 0.6% at 200°C / 24 h, which keeps the interface in place under vibration and repeated hot and cold cycles.

Q3: Can it insulate a live power stage from a grounded cooling plate?
A: Yes. Breakdown voltage is 2450 V/mm at 0.20 mm thickness to IEC 60243, and the compound is non-corrosive to aluminium, copper and nickel cold plates.

Q4: Will it survive the under-hood environment?
A: The compound is resistant to water, moisture, ozone and weathering and remains paste-like from -50°C to +200°C, with documented no-powdering and no-drying behaviour on a 0.2 mm film.

Q5: What are the MOQ, lead time and customization options?
A: MOQ is 1 kg with 50 tons per month capacity and 3-5 working days delivery for standard drums; OEM / ODM, custom conductivity from 1.0 to 6.0 W/m·K, private label and syringe or cartridge filling are available with free samples, TDS and MSDS.

Application Instructions
  1. Clean the module baseplate and cold plate with a solvent; remove oxidation and old compound, then dry fully.
  2. Apply an even thin film by dispensing, screen printing or roller over the full contact area.
  3. Assemble and clamp or bolt to the specified torque immediately to control bond line thickness.
  4. Wipe excess from edges to avoid contaminating connectors, sensors and busbars.
Packaging and Supply
  • Standard packaging: 1 kg and 5 kg plastic drums with TDS and MSDS; syringe, cartridge and custom sizes on request.
  • MOQ 1 kg; supply ability 50 tons per month; delivery 3-5 working days for standard drums.
  • OEM / ODM, custom conductivity, custom colour and private label supported; payment terms T/T, L/C and Western Union.
Compliance, Storage and Shelf Life
  • RoHS 2.0 and REACH compliant; non-toxic, odourless, non-corrosive; non-dangerous goods for transport.
  • TDS, MSDS and COA supplied with the shipment; test reports available on request for your PPAP or validation file.
  • Store sealed below 27°C; shelf life 12 months unopened; stir before use if a small amount of oil separates.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

Shenzhen Hanast New Material Co., Ltd.