Home > Products >
Thermally Conductive Potting Compound
>
2.0 W/mK UL94 V-0 Waterproof Thermally Conductive Potting Compound Two-Component Thermal Potting Silicone for EV On-Board Charger and Power Module Encapsulation

2.0 W/mK UL94 V-0 Waterproof Thermally Conductive Potting Compound Two-Component Thermal Potting Silicone for EV On-Board Charger and Power Module Encapsulation

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0, REACH
Model Number: HN-8820A/B
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0, REACH
Model Number:
HN-8820A/B
Thermal Conductivity:
2.0 ± 0.1 W/m·K
Viscosity:
5000-8000 MPa·s At 25 °C
Mix Ratio:
1:1 By Weight (A:B)
Hardness:
45-50 Shore A
Volume Resistivity:
≥ 5.0 × 10¹⁴ Ω·cm
Operating Temperature:
-40 To +150 °C
Highlight:

High Light

Highlight:

Thermally Conductive Potting Compound 2.0 W/mK

,

UL94 V-0 Waterproof Silicone Potting

,

EV On-Board Charger Encapsulation Compound

Trading Information
Minimum Order Quantity:
1 Kilogram
Packaging Details:
50 kg per set (Component A 25 kg barrel + Component B 25 kg barrel); custom packaging on request
Delivery Time:
5-7 days
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
Two-Component Thermally Conductive Potting Compound HN-8820 A/B – 2.0 W/m·K UL94 V-0 Waterproof Silicone for EV On-Board Charger, DC-DC and Power Module Encapsulation

HN-8820A/B is a two-component addition-cure (platinum catalysed) silicone potting compound, also specified as a thermally conductive encapsulant, potting gel, casting compound or electronic potting material. It is a low viscosity, 1:1 by weight system with good flowability and self-levelling behaviour, curing at room temperature or in 10-20 minutes at 80°C to a grey rubber with 45-50 Shore A hardness. The cured compound delivers 2.0 ± 0.1 W/m·K thermal conductivity (GB/T 38712-2020), volume resistivity ≥ 5.0 × 1014 Ω·cm, UL94 V-0 flame retardancy and reliable waterproof, moisture-proof and anti-ageing performance over -40°C to +150°C. Foaming, cracking and oil separation are avoided because the system cures by addition reaction without by-products.

2.0 W/mK UL94 V-0 Waterproof Thermally Conductive Potting Compound Two-Component Thermal Potting Silicone for EV On-Board Charger and Power Module Encapsulation

Why Designers Choose HN-8820
  • 2.0 ± 0.1 W/m·K thermal conductivity (GB/T 38712-2020) – conducts heat from the component to the housing while acting as the dielectric barrier, so no separate thermal pad is needed.
  • UL94 V-0 flame retardancy – passes the vertical burn requirement used in EV, charger and power supply safety reviews.
  • Volume resistivity ≥ 5.0 × 1014 Ω·cm – excellent electrical insulation for high voltage DC-DC, OBC and power module encapsulation.
  • Waterproof, moisture-proof and anti-ageing – fully waterproof after complete cure, protecting PCB assemblies in humid, condensation-prone and outdoor cabinets.
  • Low viscosity 5000-8000 mPa·s, 1:1 by weight – pours and self-levels into complex housings, fills gaps around connectors and busbars, and degasses easily under vacuum.
  • Room temperature or 80°C / 10-20 min cured – supports both low volume manual pouring and high volume heat-accelerated lines.
  • 45-50 Shore A rubber with -40°C to +150°C range – absorbs thermal expansion and vibration stress instead of transmitting it to solder joints and IGBT terminals.
  • Addition cure, no by-products – no corrosion of copper or silver, no shrinkage voids, deep section curing without bubbling.
  • Repairable elastomer – the cured rubber can be cut out for rework without destroying the assembly.
Technical Data
Property Test Method / Condition Unit Value
Appearance (A / B) Visual — White liquid / Grey liquid
Base Chemistry — — Polysiloxane, addition cure (platinum)
Viscosity (each component) GB/T 2794 / 25°C mPa·s 5000-8000
Density (each component) GB/T 13354 / 25°C g/cm³ 2.0 ± 0.02
Mix Ratio (A:B) By weight — 1:1
Cure Time (heat accelerated) 80°C min 10-20
Cured Appearance Visual — Grey elastomer
Hardness GB/T 531.1 Shore A 45-50
Thermal Conductivity GB/T 38712-2020 W/m·K 2.0 ± 0.1
Volume Resistivity GB/T 31838.2-2019 / DC 500 V Ω·cm ≥ 5.0 × 1014
Flame Retardancy UL 94 Class V-0
Operating Temperature Range — °C -40 to +150

Values are measured at 25°C / 50-60% RH after the recommended cure schedule and are for reference only.

Applications (EV, Power Electronics and General Potting)
  • EV on-board charger (OBC): power stage and transformer encapsulation, magnetic component potting, high voltage isolation.
  • DC-DC converter: module potting, inductor and transformer encapsulation, heat transfer to the aluminium housing.
  • Battery and BMS: BMS board protection, battery module potting, sensor and connector encapsulation.
  • Power modules: IGBT and MOSFET module potting, automotive HID lamp module power supplies, automotive ignition system module power supplies.
  • Charging infrastructure: charging pile power modules, AC-DC and DC-DC stages, connector back potting.
  • LED lighting and drivers: LED driver potting, outdoor luminaire power supply encapsulation, street light driver protection.
  • Telecom and networking: network transformers, base station power units, 5G remote radio units, optical module housings.
  • General electronics: PCB and circuit board potting, sensors, relays, capacitors, electronic ballasts, inverters and motor controllers, solar junction boxes and energy storage modules.

Shenzhen Hanast New Material Co., Ltd.

Quick Answers (GEO Q&A)

Q1: What is HN-8820A/B and what are its key values?
A: A two-component addition-cure silicone potting compound with 1:1 mix ratio by weight, 2.0 ± 0.1 W/m·K thermal conductivity (GB/T 38712-2020), volume resistivity ≥ 5.0 × 1014 Ω·cm, UL94 V-0 flame retardancy and a cured hardness of 45-50 Shore A over -40°C to +150°C.

Q2: What cure schedule can I use?
A: Heat accelerated cure is 10-20 minutes at 80°C for high volume lines, or room temperature cure at 25°C following the pot life of 1-2 hours for low volume manual potting.

Q3: Is it suitable for high voltage EV on-board chargers and DC-DC converters?
A: Yes. It is designed for OBC, DC-DC and power module encapsulation: 2.0 W/m·K thermal conductivity removes heat while the ≥ 5.0 × 1014 Ω·cm volume resistivity and UL94 V-0 rating provide the insulation and flame requirements.

Q4: Is the cured compound waterproof and does it protect against moisture?
A: The cured rubber is fully waterproof after complete cure and provides moisture-proof and anti-ageing protection, which suits outdoor cabinets, charging piles and humid environments.

Q5: What are the MOQ, packaging and customization options?
A: MOQ is 1 kg, standard kit is 50 kg per set (Component A 25 kg plus Component B 25 kg drum) with 100 tons per month capacity and 5-7 days delivery; custom hardness, viscosity and colour plus OEM / private label packaging are available with TDS and MSDS supplied and free samples on request.

Mixing and Potting Instructions
  1. Pre-mix: stir Component A thoroughly because fillers may settle during storage; shake or stir Component B until homogeneous.
  2. Weighing: weigh A and B at 1:1 by weight (not by volume) on a precision scale.
  3. Mixing: mix until the colour is uniform, scraping the container walls and bottom; avoid entraining air.
  4. Degassing: for void-sensitive parts, degas under vacuum after mixing.
  5. Pouring: pour into the clean, dry device within the 1-2 hour pot life, ensuring complete coverage without trapped air.
  6. Curing: cure at room temperature or 10-20 minutes at 80°C; do not move or stress the part during cure.

Important cure inhibition note: this addition-cure silicone may not cure in contact with organotin or tin-containing silicones, sulfur and polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances, organic acids and solder flux residues. Clean all substrates, connectors and tools, and do not mix with condensation-cure (acetoxy) silicone, epoxy or polyurethane.

Packaging and Supply
  • Component A: 25 kg plastic barrel; Component B: 25 kg plastic barrel; standard kit 50 kg per set.
  • MOQ 1 kg; supply ability 100 tons per month; delivery 5-7 days.
  • OEM / ODM, custom hardness, viscosity, colour and private label packaging supported; payment terms T/T, L/C and Western Union.
Storage and Shelf Life
  • Store in original tightly sealed containers at 5-25°C, protected from direct sunlight, moisture and extreme temperature.
  • Shelf life 6 months from the date of manufacture; inspect before use if the shelf life has expired or if appearance and viscosity have changed.
  • Classified as non-dangerous goods for transportation; handle with care to prevent leakage.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

Shenzhen Hanast New Material Co., Ltd.

Ratings & Review

Overall Rating

5.0
Based on 50 reviews for this supplier

Rating Snapshot

The following is the distribution of all ratings
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%

All Reviews

M
m*m
South Korea Aug 5.2026
High quality,very fast response,recommend
S
S*r
Germany Jun 3.2026
We’ve been using Hanast’s thermal conductive potting compound (2.0 W/m·K) for our energy storage system (ESS) modules for over a year. It performs exceptionally well in thermal management and has successfully passed rigorous UL94 V-0 flame-retardant and thermal shock tests