Home > Products >
Thermally Conductive Potting Compound
>
Fast Heat Cure 2.0 W/mK UL94 V-0 Thermally Conductive Potting Compound Gel for Motor Drive Inverter Lines

Fast Heat Cure 2.0 W/mK UL94 V-0 Thermally Conductive Potting Compound Gel for Motor Drive Inverter Lines

Product Details:
Place of Origin: Shenzhen, Guangdong, China
Brand Name: Hanast
Certification: UL 94 V-0, RoHS, ISO 9001:2015
Model Number: HN-8820A/B
Detail Information
Place of Origin:
Shenzhen, Guangdong, China
Brand Name:
Hanast
Certification:
UL 94 V-0, RoHS, ISO 9001:2015
Model Number:
HN-8820A/B
Thermal Conductivity:
2.0 ± 0.1 W/m·K
Mix Ratio:
1:1 By Weight
Mixed Viscosity:
5,000-8,000 MPa·s At 25°C
Hardness:
Shore A 45-50
Volume Resistivity:
≥ 5.0 × 10^14 Ω·cm
Operating Temperature:
-40 To +150°C
Highlight:

High Light

Highlight:

Fast Heat Cure Potting Gel

,

Motor Drive Inverter Encapsulant Silicone

,

2.0 W/mK UL94 V-0 Potting Compound

Trading Information
Minimum Order Quantity:
1 Kilogram for trial, standard 50 kg set (A 25 kg + B 25 kg)
Packaging Details:
Component A 25 kg plastic barrel + Component B 25 kg plastic barrel in a 50 kg set, with TDS, MSDS and COA inside; export pallet; private label on request
Delivery Time:
7-10 days for standard sets, 15-20 days for custom formulation and private label
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
Product Overview

HN-8820A/B is a two-component, addition-cure (platinum catalysed) thermally conductive silicone potting gel with a fast heat cure of 10–20 minutes at 80 °C. It is built for lines where the potting step must not become the bottleneck: mix 1:1 by weight, pour or meter-mix, and demould or move on within the same shift.

Viscosity is low (5,000–8,000 mPa·s for both components and the mix), so the gel penetrates dense windings, stator slots, terminal blocks and narrow cavities and levels out on its own. The cured elastomer is a grey Shore A 45–50 rubber with 2.0 ± 0.1 W/m·K thermal conductivity, volume resistivity ≥ 5.0 × 1014 Ω·cm, UL 94 V-0 flame retardancy and reliable waterproof, moisture proof and anti-ageing performance from -40 °C to +150 °C.

Typical buyers are B2B factories and brand owners — factory owners, purchasing managers, R&D engineers, project managers and product managers — potting motor drives, inverters, servo and pump controllers, battery BMS boards, network transformers and power modules, including high volume lines in Southeast Asia.

Fast Heat Cure 2.0 W/mK UL94 V-0 Thermally Conductive Potting Compound Gel for Motor Drive Inverter Lines

Why Factories and Engineering Teams Choose HN-8820A/B
  • Fast heat cure, 10–20 min at 80 °C – the potting step fits inside a normal production takt time; fixtures and carousels turn around within the shift instead of overnight.
  • Room temperature cure option as well – the same material works on lines without an oven, so one part number covers both production routes.
  • 2.0 ± 0.1 W/m·K thermal conductivity (GB/T 38712-2020) – moves heat out of motor drives, inverters and power stages that were previously potted with non-thermal resin.
  • Low viscosity 5,000–8,000 mPa·s, self-levelling – fills stator slots, windings and narrow housings without voids; fast and complete vacuum degassing.
  • UL 94 V-0 flame retardancy – documentation-ready safety rating for appliance, motor, automotive and battery audits.
  • Waterproof, moisture proof and anti-ageing – protects the assembly in humid, coastal and outdoor cabinets, the condition most Southeast Asian factories ship into.
  • Volume resistivity ≥ 5.0 × 1014 Ω·cm – high insulation resistance for motor winding and high voltage isolation requirements.
  • Shore A 45–50 semi-rigid rubber – mechanically supports windings and heavy components, damps vibration, and still absorbs thermal expansion instead of loading joints like rigid epoxy.
  • Addition cure, no by-products – no corrosive or volatile release, so no corrosion of copper windings, brass terminals or laminations.
  • Volume supply ready – 50 kg sets, 50 tons per month capacity, ISO 9001 quality system, TDS / MSDS / COA per lot, OEM / ODM and private label service.
Technical Data
Before mixing (uncured components)
Property Test Method / Condition Unit Component A Component B
Appearance Visual — White liquid Grey liquid
Base Chemistry — — Polysiloxane Polysiloxane
Viscosity GB/T 2794 / 25 °C mPa·s 5,000–8,000 5,000–8,000
Density GB/T 13354 / 25 °C g/cm³ 2.0 ± 0.02 2.0 ± 0.02
After mixing (A+B)
Property Test Method / Condition Unit Value
Mix Ratio (A:B) By weight — 1:1
Mixed Viscosity 25 °C mPa·s 5,000–8,000
Cure Time (Heat Accelerated) 80 °C min 10–20
Room Temperature Cure 25 °C — Full cure at ambient temperature; working time per batch pot life data
Cured properties
Property Test Method / Condition Unit Value
Appearance Visual — Grey elastomer
Hardness GB/T 531.1 Shore A 45–50
Thermal Conductivity GB/T 38712-2020 W/m·K 2.0 ± 0.1
Volume Resistivity GB/T 31838.2-2019 / DC 500 V Ω·cm ≥ 5.0 × 1014
Flame Retardancy UL 94 Class V-0
Operating Temperature Range — °C -40 to +150
Environmental Resistance — — Waterproof, moisture proof, anti-ageing

All values are measured under standard conditions (25 °C, 50–60% RH) after the recommended cure schedule and are for reference only.

Recommended Curing Schedule
Cure Option Condition Duration Notes
Heat-accelerated cure 80 °C 10–20 min Fast cure for high throughput lines; ensure even heating of the potting mass
Room-temperature cure 25 °C Per batch pot life data Full cure at ambient temperature, no oven required
Applications — Where HN-8820A/B Is Specified
  • Motor drive and industrial control – motor drive and VFD inverter potting, servo and stepper drive modules, pump and fan controllers, soft starters, power stacks and terminal blocks.
  • New energy vehicle and battery BMS – DC-DC converter potting, BMS board and battery module encapsulation, EV charger and charging pile power stages, onboard charger assemblies.
  • Network and communication equipment – network and LAN transformer potting, inductors and filters, communication power supplies, 5G and telecom modules.
  • Power modules and supplies – automotive HID lamp and ignition module power supplies, switching and driver power supplies, IGBT and MOSFET module encapsulation.
  • Home appliance and consumer electronics – home appliance controllers, inverter air conditioner modules, consumer electronics power boards, LED driver boards.
  • Energy storage, photovoltaic and outdoor assemblies – ESS module potting, PV inverter power stages, outdoor lighting drivers, marine and humid environment electronics.

Fast Heat Cure 2.0 W/mK UL94 V-0 Thermally Conductive Potting Compound Gel for Motor Drive Inverter Lines

Mixing and Potting Instructions
  1. Pre-mix – stir Component A thoroughly before use because fillers may settle during storage; shake or stir Component B to ensure homogeneity.
  2. Weighing – accurately weigh A and B by weight, not by volume, on a precision electronic scale at 1:1.
  3. Mixing – mix until the colour is uniform; scrape the container walls and bottom to ensure full dispersion and avoid introducing excessive air.
  4. Degassing (optional) – for void sensitive applications, degas under vacuum; the low viscosity makes degassing fast.
  5. Pouring / potting – pour the mixed compound into the clean, dry device within the pot life; ensure complete coverage without trapped air.
  6. Curing – cure per the schedule above; do not move or stress the part during cure, and allow the potting mass to reach oven temperature evenly when using the 80 °C option.

Cure inhibition warning (important): this addition-cure silicone may fail to cure in contact with organotin or tin-containing silicones, sulfur and polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances and solder flux residues. Clean all substrates and tools free of these contaminants before use, and never mix it in contact with condensation-cure (acetoxy) silicone rubber, epoxy or polyurethane.

Grade selection note: within our potting range, HN-8820A/B is the low viscosity, fast cure grade for dense windings and high throughput lines, HN-8830A/B (3.0 W/m·K, Shore A 35) is the low stress grade for fragile components, and HN-8840A/B (4.0 W/m·K) is the ultra-high conductivity grade for the hottest power assemblies.

Packaging, Storage and Shelf Life
Component Package Size Container Type Notes
Component A 25 kg Plastic barrel —
Component B 25 kg Plastic barrel —
Kit (A+B) 50 kg / set — Standard supply set
  • Store in original, tightly sealed containers in a cool, dry, well ventilated area; recommended storage temperature 5–25 °C.
  • Protect from direct sunlight, moisture and extreme temperatures.
  • Shelf life: 6 months from date of manufacture when stored as recommended. Products past shelf life should be inspected and tested before use.
  • Transportation: classified as non-dangerous goods (general chemicals). Handle with care to prevent leakage.
  • Industrial / professional use only. Wear nitrile gloves, safety goggles and protective clothing; ensure adequate ventilation.
Quality System and Buyer Support
  • ISO 9001 quality management with batch testing to GB/T 38712-2020, GB/T 531.1, GB/T 31838.2-2019 and UL 94 before every lot release.
  • Documentation pack – TDS, MSDS and COA per lot for incoming inspection, customer audits and customs clearance; UL 94 V-0 and RoHS material statements available.
  • Cure profile support – our FAE team helps you validate the 80 °C / 10–20 min profile on your own potting mass, because thick sections heat more slowly than thin ones.
  • Custom formulation – viscosity, hardness (Shore A), colour, pot life and conductivity tuned to your potting process.
  • OEM / ODM and private label – your brand on the barrel, your label on the carton, your language on the documents.
  • Bulk and repeat supply – 50 tons per month capacity and export experience to Vietnam, Thailand, Indonesia, Malaysia, the Philippines and Singapore, with export packing, palletising and shipping documents ready for factory receiving.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

Fast Heat Cure 2.0 W/mK UL94 V-0 Thermally Conductive Potting Compound Gel for Motor Drive Inverter Lines

FAQ — Technical Questions Buyers Ask
Q1: How fast does HN-8820A/B cure, and will it fit my line takt time?

At 80 °C the potting mass cures in 10–20 minutes, so fixtures and carousels can turn around within the shift. Room temperature cure is also possible for lines without an oven. Thick potting sections heat more slowly than thin ones, so validate the profile on your own part before setting the line time.

Q2: Why is a low viscosity potting gel better for motor drive and transformer parts?

At 5,000–8,000 mPa·s the gel penetrates stator slots, dense windings, inductors and narrow cavities, levels out on its own and degasses quickly. Higher filled systems leave voids, and voids cause partial discharge and local hot spots.

Q3: Is HN-8820A/B flame retardant and insulating enough for battery and BMS assemblies?

Yes. It is UL 94 V-0 rated with volume resistivity at least 5.0 × 1014 Ω·cm to GB/T 31838.2-2019 at DC 500 V, with 2.0 ± 0.1 W/m·K thermal conductivity and a -40 °C to +150 °C service range.

Q4: Why did my potting compound not cure, and how do I prevent it?

This is addition-cure (platinum) silicone and is sensitive to inhibitors: organotin or tin-containing silicones, sulfur and polysulfide compounds, amines, polyurethane rubber, ammonia, phosphorus compounds, acids and solder flux residues. Clean substrates and tools thoroughly, do not mix in containers previously used for epoxy, polyurethane or acetoxy silicone, and weigh A and B accurately at 1:1.

Q5: What are the MOQ, packaging, lead time and customization options?

Standard supply is a 50 kg set (Component A 25 kg + Component B 25 kg plastic barrels), minimum order 1 kg equivalent for trials, capacity 50 tons per month and 7–10 days lead time. Free samples, TDS, MSDS and COA are available, and we support custom viscosity, hardness and colour plus OEM, ODM and private label programs for Southeast Asian factories.

Ratings & Review

Overall Rating

5.0
Based on 50 reviews for this supplier

Rating Snapshot

The following is the distribution of all ratings
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%

All Reviews

M
m*m
South Korea Aug 5.2026
High quality,very fast response,recommend
S
S*r
Germany Jun 3.2026
We’ve been using Hanast’s thermal conductive potting compound (2.0 W/m·K) for our energy storage system (ESS) modules for over a year. It performs exceptionally well in thermal management and has successfully passed rigorous UL94 V-0 flame-retardant and thermal shock tests