HN-8820A/B is a two-component, addition-cure (platinum catalysed) flame retardant thermally conductive silicone potting compound. It mixes 1:1 by weight, flows and self-levels at a low viscosity of 5,000–8,000 mPa·s, and cures at room temperature or in 10–20 minutes at 80 °C.
Three properties make it the choice for outdoor and safety-regulated assemblies: UL 94 V-0 flame retardancy, 2.0 ± 0.1 W/m·K thermal conductivity, and waterproof, moisture proof and anti-ageing performance from -40 °C to +150 °C. The cured elastomer is a grey Shore A 45–50 rubber with volume resistivity ≥ 5.0 × 1014 Ω·cm, so protection, insulation and heat transfer come from one material instead of a potting resin plus a separate flame barrier.
Typical buyers are B2B factories and brand owners — factory owners, purchasing managers, R&D engineers, project managers and product managers — in outdoor energy storage, solar and EV charging infrastructure, battery BMS, appliance and lighting electronics, including high volume lines in Southeast Asia.
![]()
| Property | Test Method / Condition | Unit | Component A | Component B |
|---|---|---|---|---|
| Appearance | Visual | — | White liquid | Grey liquid |
| Base Chemistry | — | — | Polysiloxane | Polysiloxane |
| Viscosity | GB/T 2794 / 25 °C | mPa·s | 5,000–8,000 | 5,000–8,000 |
| Density | GB/T 13354 / 25 °C | g/cm³ | 2.0 ± 0.02 | 2.0 ± 0.02 |
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Mix Ratio (A:B) | By weight | — | 1:1 |
| Mixed Viscosity | 25 °C | mPa·s | 5,000–8,000 |
| Cure Time (Heat Accelerated) | 80 °C | min | 10–20 |
| Room Temperature Cure | 25 °C | — | Full cure at ambient temperature; working time per batch pot life data |
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance | Visual | — | Grey elastomer |
| Hardness | GB/T 531.1 | Shore A | 45–50 |
| Thermal Conductivity | GB/T 38712-2020 | W/m·K | 2.0 ± 0.1 |
| Volume Resistivity | GB/T 31838.2-2019 / DC 500 V | Ω·cm | ≥ 5.0 × 1014 |
| Flame Retardancy | UL 94 | Class | V-0 |
| Operating Temperature Range | — | °C | -40 to +150 |
| Environmental Resistance | — | — | Waterproof, moisture proof, anti-ageing |
All values are measured under standard conditions (25 °C, 50–60% RH) after the recommended cure schedule and are for reference only.
| Cure Option | Condition | Duration | Notes |
|---|---|---|---|
| Heat-accelerated cure | 80 °C | 10–20 min | Fast cure for high throughput lines; ensure even heating of the potting mass |
| Room-temperature cure | 25 °C | Per batch pot life data | Full cure at ambient temperature, no oven required |
![]()
Cure inhibition warning (important): this addition-cure silicone may fail to cure in contact with organotin or tin-containing silicones, sulfur and polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances and solder flux residues. Clean all substrates and tools free of these contaminants before use, and never mix it in contact with condensation-cure (acetoxy) silicone rubber, epoxy or polyurethane.
Grade selection note: HN-8820A/B is the flame retardant, low viscosity grade for outdoor cabinets and dense windings; HN-8830A/B (3.0 W/m·K, Shore A 35) is the low stress grade for fragile components; HN-8840A/B (4.0 W/m·K) is the ultra-high conductivity grade for the hottest power assemblies.
| Component | Package Size | Container Type | Notes |
|---|---|---|---|
| Component A | 25 kg | Plastic barrel | — |
| Component B | 25 kg | Plastic barrel | — |
| Kit (A+B) | 50 kg / set | — | Standard supply set |
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
![]()
It is rated UL 94 V-0 and supplied with a material statement for your certification file. Combined with the waterproof, moisture proof and anti-ageing performance in the -40 °C to +150 °C range, it suits outdoor ESS cabinets, combiner boxes and EV charging power modules.
Equal parts by weight remove the most common operator error in two-component potting and let the same material run on manual weighing, meter-mix machines and cartridge systems. Batch to batch viscosity stays inside 5,000–8,000 mPa·s, so dispense parameters do not need re-tuning between drums.
2.0 ± 0.1 W/m·K thermal conductivity to GB/T 38712-2020 and volume resistivity of at least 5.0 × 1014 Ω·cm to GB/T 31838.2-2019 at DC 500 V, so heat transfer and high voltage isolation are covered by the same encapsulant.
This is addition-cure (platinum) silicone and is sensitive to inhibitors: organotin or tin-containing silicones, sulfur and polysulfide compounds, amines, polyurethane rubber, ammonia, phosphorus compounds, acids and solder flux residues. Clean substrates and tools thoroughly, do not mix in containers previously used for epoxy, polyurethane or acetoxy silicone, and weigh A and B accurately at 1:1.
Standard supply is a 50 kg set (Component A 25 kg + Component B 25 kg plastic barrels), minimum order 1 kg equivalent for trials, capacity 50 tons per month and 7–10 days lead time. Free samples, TDS, MSDS and COA are available, and we support custom viscosity, hardness and colour plus OEM, ODM and private label programs for Southeast Asian factories.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews