| Place of Origin: | Shenzhen, Guangdong, China |
| Brand Name: | Hanast |
| Certification: | RoHS, REACH, UL 94 V-0, MSDS |
| Model Number: | HN-8820A/B |
| Document: | HANAST_TDS_HN-8820 (2.0W_...¼‰.pdf |
HN-8822A/B is a two-component addition-cure (platinum-catalysed) thermally conductive silicone potting compound supplied in a 1:1 mix ratio by weight and bulk-packed for factories that consume potting material by the ton. Its 2.0 ± 0.1 W/m·K thermal conductivity gives an effective heat-transfer path for power supplies, LED drivers, transformers and chargers, while UL 94 V-0 flame retardancy and electrical insulation above 5.0 × 1014 Ω·cm keep the encapsulated unit safe. With 3500–5500 mPa·s viscosity, a 60–90 minute working life and self-levelling flow, it is built for deep-fill, multi-cavity and high-volume pouring on automated or semi-automated lines in tropical climates.
![]()
| Application | Typical Fill Weight per Unit | Approx. Units per 200 kg Drum |
|---|---|---|
| LED driver / LED power supply | 250–700 g | 280–800 pcs |
| Power adapter, charger, SMPS housing | 60–250 g | 800–3,300 pcs |
| Transformer, inductor, magnetic component | 300 g–2.5 kg | 80–650 pcs |
| E-bike / EV on-board charger, BMS module | 1.5–6 kg | 33–130 pcs |
| Solar micro-inverter, PV junction box | 0.5–2 kg | 100–400 pcs |
| Industrial control board, motor controller | 0.8–3 kg | 65–250 pcs |
Material cost per potted unit is stable because density and mix ratio are fixed at 1:1 by weight; the long pot life and low scrap rate protect line yield, and a Shenzhen factory-direct source removes trading-company margins on volume orders of 1–20 tons per month.
Fixed MOQ from 1 kg for trial, 50 kg set kits for pilot runs and 200 kg drums for serial production. Full export documents — MSDS, RoHS, REACH, COA per batch and HS code 3910.00 — ship with every order. FOB Shenzhen, CIF Ho Chi Minh City, Laem Chabang, Port Klang, Tanjung Priok and Manila are all quotable.
Datasheet-level parameters are published below: thermal conductivity, viscosity, pot life, cure schedule, hardness, dielectric strength, volume resistivity, CTE, operating range and cure-inhibition guidance. Custom hardness, viscosity, pot life, colour and thermal filler loading can be tuned on request for a specific housing or dispensing robot.
| Property | Value |
|---|---|
| Category | Silicone Potting Compound (2.0 W/m·K thermally conductive, V-0 flame retardant, addition cure) |
| Model | HN-8822A/B |
| Cure System | Two-component addition cure (platinum-catalysed) |
| Mix Ratio (A : B) | 1 : 1 by weight |
| Appearance (A / B, uncured) | White liquid / Grey liquid |
| Viscosity (25 °C) | 3500–5500 mPa·s |
| Density (25 °C) | 2.0 ± 0.02 g/cm³ |
| Pot Life (25 °C, 100 g) | 60–90 min |
| Cure Time, Heat Accelerated (80 °C) | 15–25 min |
| Cure Time, Room Temperature (25 °C) | 4–6 h (full cure) |
| Cured Appearance | Grey elastomer |
| Hardness | Shore A 45–50 |
| Thermal Conductivity | 2.0 ± 0.1 W/m·K |
| Thermal Expansion (CTE) | ≤ 180 µm/(m·°C) |
| Volume Resistivity | ≥ 5.0 × 1014 Ω·cm |
| Dielectric Strength | ≥ 20 kV/mm |
| Flame Retardancy | UL 94 V-0 |
| Operating Temperature Range | −40 to 150 °C |
| Waterproof / Moisture-proof | Passes 85 °C / 85% RH humidity ageing, IP-sealing after full cure |
| Compliance | RoHS, REACH, MSDS available |
| Shelf Life | 6 months at 5–25 °C in sealed drums |
![]()
As an addition-cure silicone, HN-8822A/B will not cure in contact with organotin (condensation-cure) silicone, sulfur and polysulfide rubber, amines, polyurethane, ammonia, phosphorus compounds, acidic residues and solder flux. Clean housings, jigs and mixing tools with solvent before use and never reuse containers that held tin-cure silicone, epoxy or PU.
![]()
Shenzhen Hanast New Material Co., Ltd. is a source manufacturer of industrial silicone materials, part of the Shenzhen Kanglibang Technology group, operating a 40,000 m² production base in Guangdong with a new Jiangmen plant for capacity expansion. Hanast supplies thermally conductive potting compounds, RTV-2 mould-making silicone and electronic-grade encapsulants to OEM factories across Vietnam, Thailand, Malaysia, Indonesia and the Philippines, with OEM/ODM tuning of hardness, viscosity, pot life and colour for volume programmes.
A: Most driver, adapter and transformer lines consume 200 kg to 2 t per month; EV charger and BMS programmes run 3–10 t per month. We quote drum price tiers from 200 kg upward, so cost per kg drops as monthly volume rises.
A: Yes. The 3500–5500 mPa·s viscosity is pumpable and the 200 kg drum fits standard drum-follower dispensing systems; use a static mixer with a 1:1 by weight metering pump.
A: No. Pot life and cure speed are separate: working life is 60–90 min at 25 °C for large batches, while cure completes in 15–25 min at 80 °C, so fixtures are released quickly.
A: Yes. The cured compound passes 85 °C / 85% RH humidity ageing and is waterproof and moisture-proof, which is why it is used on lines in Vietnam, Thailand, Malaysia and Indonesia.
A: MOQ is 1 kg for a trial and 50 kg for a pilot run, bulk from 200 kg drums at USD 6.8–9.2 per kg FOB Shenzhen depending on volume. Samples ship in 3–5 working days, bulk in 10–18 days.
A: Yes. We tune filler loading from 0.8 to 3.0 W/m·K, hardness from Shore A 20 to 70, pot life from 30 to 120 min and colour on request, with samples supplied for your qualification run.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews