Home > Products >
Thermally Conductive Potting Compound
>
4.0 W/mK Ultra-High Thermal Conductivity Thermally Conductive Potting Compound UL94 V-0 Flame Retardant 1:1 Mix Ratio Self-Levelling Thermal Potting Silicone for BMS Battery Modules

4.0 W/mK Ultra-High Thermal Conductivity Thermally Conductive Potting Compound UL94 V-0 Flame Retardant 1:1 Mix Ratio Self-Levelling Thermal Potting Silicone for BMS Battery Modules

Product Details:
Place of Origin: Shenzhen, Guangdong, China
Brand Name: Hanast
Certification: UL 94 V-0, RoHS, ISO 9001:2015
Model Number: HN-8840A/B
Detail Information
Place of Origin:
Shenzhen, Guangdong, China
Brand Name:
Hanast
Certification:
UL 94 V-0, RoHS, ISO 9001:2015
Model Number:
HN-8840A/B
Thermal Conductivity:
4.0 ± 0.1 W/m·K
Mix Ratio:
1:1 By Weight
Hardness:
Shore A 45 ± 8
Operating Temperature:
-40 To +200 °C
Volume Resistivity:
≥ 1.0 × 10^14 Ω·cm
Mixed Viscosity:
13,000 ± 2,000 MPa·s At 25 °C
Highlight:

High Light

Highlight:

4.0 W/mK Ultra-High Thermal Potting

,

BMS Battery Module Encapsulation Silicone

,

UL94 V-0 High Filler Potting Compound

Trading Information
Minimum Order Quantity:
1 Kilogram for trial, standard 50 kg set (A 25 kg + B 25 kg)
Packaging Details:
Component A 25 kg plastic barrel + Component B 25 kg plastic barrel in a 50 kg set, with TDS, MSDS and COA inside; export pallet; private label on request
Delivery Time:
7-10 days for standard sets, 15-20 days for custom formulation and private label
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
Product Overview

HN-8840A/B is a two-component, addition-cure (platinum catalysed) silicone potting compound built around an ultra-high 4.0 ± 0.1 W/m·K thermal conductivity. It is the highest conductivity grade in our potting range and is designed for high power electronic components that dissipate serious heat inside an encapsulated volume, where a surface thermal grease alone cannot solve the problem.

It mixes 1:1 by weight, flows and self-levels, and cures at room temperature or with heat acceleration. The cured elastomer is a grey Shore A 45 ± 8 rubber with volume resistivity ≥ 1.0 × 1014 Ω·cm, UL 94 V-0 flame retardancy and a -40 °C to +200 °C service range, so the same encapsulant handles thermal, electrical and mechanical duty at once.

Typical buyers are B2B factories and brand owners — factory owners, purchasing managers, R&D engineers, project managers and product managers — in battery BMS and EV power electronics, switching power supplies, automotive modules and appliance controllers, including high volume lines in Southeast Asia.

4.0 W/mK Ultra-High Thermal Conductivity Thermally Conductive Potting Compound UL94 V-0 Flame Retardant 1:1 Mix Ratio Self-Levelling Thermal Potting Silicone for BMS Battery Modules

Why Factories and Engineering Teams Choose HN-8840A/B
  • 4.0 ± 0.1 W/m·K ultra-high thermal conductivity (GB/T 38712-2020) – potting level heat transfer for high power modules, BMS boards and DC-DC stages where 1–2 W/m·K encapsulants simply cannot keep junction temperature in spec.
  • High filler loading with 2.95 ± 0.02 g/cm³ density – a heavily filled system that still flows, giving real conductivity rather than a thin surface film.
  • UL 94 V-0 flame retardancy – a documentation-ready safety rating for battery pack, appliance and automotive audits.
  • Volume resistivity ≥ 1.0 × 1014 Ω·cm – high insulation resistance for high voltage EV and energy storage assemblies.
  • Shore A 45 ± 8 semi-rigid elastomer – supports heavy components and windings, damps vibration, and still absorbs thermal expansion instead of loading solder joints the way rigid epoxy does.
  • -40 °C to +200 °C service range – covers automotive under-hood, battery pack cycling and continuous duty power conversion.
  • 1:1 mix ratio, pot life 60–180 min, 4–8 h room temperature cure, 30 min at 80 °C – easy manual or meter-mix processing, fast line throughput where an oven is available, and a two-stage cure when the best flow and final properties are needed.
  • Addition cure, no by-products – no corrosive or volatile release, so no fogging on housings and no corrosion of copper, brass or aluminium parts.
  • Volume supply ready – 50 kg sets, 50 tons per month capacity, ISO 9001 quality system, TDS / MSDS / COA per lot, OEM / ODM and private label service.
Technical Data
Before mixing (uncured components)
Property Test Method / Condition Unit Component A Component B
Appearance Visual — White liquid Grey liquid
Base Chemistry — — Polysiloxane Polysiloxane
Viscosity GB/T 2794 / 25 °C mPa·s 13,500 ± 2,000 11,000 ± 2,000
Density GB/T 13354 / 25 °C g/cm³ 2.95 ± 0.02 2.95 ± 0.02
After mixing (A+B)
Property Test Method / Condition Unit Value
Mix Ratio (A:B) By weight — 1:1
Mixed Viscosity 25 °C mPa·s 13,000 ± 2,000
Mixed Density 25 °C g/cm³ 2.95 ± 0.02
Pot Life / Operating Time 25 °C / 100 g mix min 60–180
Cure Time (Room Temperature) 25 °C h 4–8
Cure Time (Heat Accelerated) 80 °C min 30
Cured properties
Property Test Method / Condition Unit Value
Appearance Visual — Grey elastomer
Hardness GB/T 531.1 Shore A 45 ± 8
Thermal Conductivity GB/T 38712-2020 W/m·K 4.0 ± 0.1
Volume Resistivity GB/T 31838.2-2019 / DC 500 V Ω·cm ≥ 1.0 × 1014
Flame Retardancy UL 94 Class V-0
Operating Temperature Range — °C -40 to 200

All values are measured under standard conditions (25 °C, 50–60% RH) after the recommended cure schedule and are for reference only.

Recommended Curing Schedule
Cure Option Condition Duration Notes
Room-temperature cure 25 °C 4–8 h Full cure at ambient temperature
Heat-accelerated cure 80 °C 30 min Fast cure; ensure even heating
Two-stage cure (recommended) RT until tack-free, then 80 °C 30 min at 80 °C Best balance of flow and final properties
Applications — Where HN-8840A/B Is Specified
  • Battery BMS and new energy vehicle – BMS board and battery module encapsulation, battery pack thermal potting, EV DC-DC converters, onboard charger stages, EV charger and charging pile power modules, motor controller housings.
  • High power modules – high power power module and circuit board potting, IGBT and MOSFET module encapsulation, rectifier and thyristor assemblies.
  • Power supplies – switching power supplies, driver power supplies, server and telecom power units, 5G power modules.
  • Automotive electronics – automotive HID lamp power modules, ignition system power modules, sensor and controller housings.
  • Home appliance and consumer electronics – home appliance controllers, inverter air conditioner modules, consumer electronics power boards.
  • Energy storage and photovoltaic – energy storage system (ESS) module potting, PV inverter and solar inverter power stages, high voltage junction boxes.

4.0 W/mK Ultra-High Thermal Conductivity Thermally Conductive Potting Compound UL94 V-0 Flame Retardant 1:1 Mix Ratio Self-Levelling Thermal Potting Silicone for BMS Battery Modules

Mixing and Potting Instructions
  1. Pre-mix – stir Component A thoroughly before use because fillers may settle during storage; shake or stir Component B to ensure homogeneity.
  2. Weighing – accurately weigh A and B by weight, not by volume, on a precision electronic scale at 1:1.
  3. Mixing – mix until the colour is uniform; scrape the container walls and bottom to ensure full dispersion and avoid introducing excessive air.
  4. Degassing (optional) – for void sensitive applications, degas under vacuum to remove air introduced during mixing.
  5. Pouring / potting – pour the mixed compound into the clean, dry device within the pot life; ensure complete coverage without trapped air.
  6. Curing – cure per the schedule above; do not move or stress the part during cure.

Cure inhibition warning (important): this addition-cure silicone may fail to cure in contact with organotin or tin-containing silicones, sulfur and polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances and solder flux residues. Clean all substrates and tools free of these contaminants before use, and never mix it in contact with condensation-cure (acetoxy) silicone rubber, epoxy or polyurethane.

Grade selection note: within our potting range, HN-8820A/B (2.0 W/m·K, 5,000–8,000 mPa·s) is the low viscosity grade for dense windings, HN-8830A/B (3.0 W/m·K, Shore A 35) is the low stress grade for fragile components, and HN-8840A/B is the ultra-high conductivity grade at 4.0 W/m·K for the hottest power assemblies.

Packaging, Storage and Shelf Life
Component Package Size Container Type Notes
Component A 25 kg Plastic barrel —
Component B 25 kg Plastic barrel —
Kit (A+B) 50 kg / set — Standard supply set
  • Store in original, tightly sealed containers in a cool, dry, well ventilated area; recommended storage temperature 5–25 °C.
  • Protect from direct sunlight, moisture and extreme temperatures.
  • Shelf life: 6 months from date of manufacture when stored as recommended. Products past shelf life should be inspected and tested before use.
  • Transportation: classified as non-dangerous goods (general chemicals). Handle with care to prevent leakage.
  • Industrial / professional use only. Wear nitrile gloves, safety goggles and protective clothing; ensure adequate ventilation.
Quality System and Buyer Support
  • ISO 9001 quality management with batch testing to GB/T 38712-2020, GB/T 531.1, GB/T 31838.2-2019 and UL 94 before every lot release.
  • Documentation pack – TDS, MSDS and COA per lot for incoming inspection, customer audits and customs clearance; UL 94 V-0 and RoHS material statements available.
  • Custom formulation – viscosity, hardness (Shore A), pot life, colour and conductivity tuned to your potting process by our FAE team.
  • Process support – guidance on meter-mix equipment, degassing, cure schedule and cure inhibition troubleshooting for new lines.
  • OEM / ODM and private label – your brand on the barrel, your label on the carton, your language on the documents.
  • Bulk and repeat supply – 50 tons per month capacity and export experience to Vietnam, Thailand, Indonesia, Malaysia, the Philippines and Singapore, with export packing, palletising and shipping documents ready for factory receiving.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

4.0 W/mK Ultra-High Thermal Conductivity Thermally Conductive Potting Compound UL94 V-0 Flame Retardant 1:1 Mix Ratio Self-Levelling Thermal Potting Silicone for BMS Battery Modules

FAQ — Technical Questions Buyers Ask
Q1: How does 4.0 W/m·K potting conductivity compare with using thermal grease plus a heat sink?

Thermal grease only works at a contact interface between two solid surfaces. HN-8840A/B fills the whole cavity, so heat leaves the component through a 4.0 ± 0.1 W/m·K volume in every direction, including into the housing and the potting wall. For high power modules, BMS boards and DC-DC stages with internal hot spots, this is the only way to move heat out of the encapsulated volume.

Q2: Is it suitable for high voltage battery and BMS assemblies?

Yes. Volume resistivity is at least 1.0 × 1014 Ω·cm to GB/T 31838.2-2019 at DC 500 V and the material is UL 94 V-0 rated, with a -40 °C to +200 °C service range covering battery pack cycling and under-hood conditions.

Q3: What are the mix ratio, pot life and cure options?

Mix 1:1 by weight. Pot life is 60–180 minutes at 25 °C for a 100 g mix. Cure 4–8 hours at room temperature or 30 minutes at 80 °C; the two-stage cure (room temperature until tack-free, then 80 °C for 30 minutes) gives the best balance of flow and final properties.

Q4: Why did my potting compound not cure, and how do I prevent it?

This is addition-cure (platinum) silicone and is sensitive to inhibitors: organotin or tin-containing silicones, sulfur and polysulfide compounds, amines, polyurethane rubber, ammonia, phosphorus compounds, acids and solder flux residues. Clean substrates and tools thoroughly, do not mix in containers previously used for epoxy, polyurethane or acetoxy silicone, and weigh A and B accurately at 1:1.

Q5: What are the MOQ, packaging, lead time and customization options?

Standard supply is a 50 kg set (Component A 25 kg + Component B 25 kg plastic barrels), minimum order 1 kg equivalent for trials, capacity 50 tons per month and 7–10 days lead time. Free samples, TDS, MSDS and COA are available, and we support custom viscosity, hardness and colour plus OEM, ODM and private label programs for Southeast Asian factories.

Ratings & Review

Overall Rating

5.0
Based on 50 reviews for this supplier

Rating Snapshot

The following is the distribution of all ratings
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%

All Reviews

M
m*m
South Korea Aug 5.2026
High quality,very fast response,recommend
S
S*r
Germany Jun 3.2026
We’ve been using Hanast’s thermal conductive potting compound (2.0 W/m·K) for our energy storage system (ESS) modules for over a year. It performs exceptionally well in thermal management and has successfully passed rigorous UL94 V-0 flame-retardant and thermal shock tests