HN-8830A/B is a two-component, 1:1 addition-cure (platinum-catalysed) silicone potting compound with 3.0 ± 0.1 W/m·K thermal conductivity and UL 94 V-0 flame retardancy. It is formulated for high-power automotive electronics such as bidirectional and unidirectional DC-DC converters and on-board wireless charging modules, where heat, voltage isolation and long-term reliability have to be solved in one encapsulation step. The cured elastomer stays rubber-elastic from −40 °C to +200 °C, cures at room temperature in 4–8 hours or at 80 °C in 30 minutes, and is supplied as a 50 kg A+B kit for Southeast Asian production lines.
3.0 W/mKThermal conductivity
UL 94 V-0Flame retardancy
−40~+200 °CService range
1:1 by weightMix ratio

HN-8830A/B two-component thermally conductive silicone potting compound
What Is HN-8830A/B?
HN-8830A/B is a two-component silicone potting compound and gap-filling encapsulant. Component A is a white liquid polysiloxane with 10500 ± 2000 mPa·s viscosity; Component B is a grey liquid polysiloxane with 9500 ± 2000 mPa·s viscosity. When mixed 1:1 by weight they form an 11000 ± 2000 mPa·s self-levelling liquid that cures into a grey Shore A 35 ± 8 elastomer.
Unlike thermal grease, which is a thin interface layer between two surfaces, a potting compound is poured into the whole housing to encapsulate the PCB, magnetic components and terminals. That means one material simultaneously provides heat transfer, electrical insulation, mechanical support and flame protection — which is exactly what a DC-DC converter or a wireless charging module needs.
Why It Fits NEV DC-DC Converters and On-Board Wireless Charging
- Heat path from component to housing: 3.0 W/m·K transfers losses from MOSFETs, transformers and rectifiers to the aluminium case without an extra gap filler step.
- Electrical insulation at high voltage: volume resistivity ≥ 1.0 × 1014 Ω·cm supports 400 V and 800 V platform isolation distances inside compact housings.
- Flame safety: UL 94 V-0 rated cured elastomer reduces fire propagation risk in the traction-adjacent electronics bay.
- Thermal cycling stability: elastic from −40 °C to +200 °C, so the potting absorbs CTE mismatch between copper, ferrite, PCB and aluminium during charge and discharge cycles.
- Vibration and moisture protection: full encapsulation of windings and solder joints protects against vibration, humidity and condensation typical of tropical Southeast Asian operating conditions.
- Production friendly: 1:1 mix ratio, 60–180 minute pot life at 25 °C, and a 30-minute 80 °C cure that fits existing inline curing ovens.

Component A white liquid and Component B grey liquid before mixing
Before Mixing (Component Properties)
| Property | Test Method / Condition | Unit | Component A | Component B |
| Appearance | Visual | — | White liquid | Grey liquid |
| Base Chemistry | — | — | Polysiloxane | Polysiloxane |
| Viscosity | GB/T 2794 / 25 °C | mPa·s | 10500 ± 2000 | 9500 ± 2000 |
| Density | GB/T 13354 / 25 °C | g/cm³ | 2.95 ± 0.02 | 2.95 ± 0.02 |
After Mixing (A+B)
| Property | Test Method / Condition | Unit | Value |
| Mix Ratio (A:B) | By weight | — | 1:1 |
| Mixed Viscosity | 25 °C | mPa·s | 11000 ± 2000 |
| Mixed Density | 25 °C | g/cm³ | 2.95 ± 0.02 |
| Pot Life / Operating Time | 25 °C, 100 g mix | min | 60–180 |
| Cure Time (Room Temperature) | 25 °C | h | 4–8 |
| Cure Time (Heat Accelerated) | 80 °C | min | 30 |
Cured Properties
| Property | Test Method / Condition | Unit | Value |
| Appearance | Visual | — | Grey elastomer |
| Hardness | GB/T 531.1 | Shore A | 35 ± 8 |
| Thermal Conductivity | GB/T 38712-2020 | W/m·K | 3.0 ± 0.1 |
| Volume Resistivity | GB/T 31838.2-2019 / DC 500 V | Ω·cm | ≥ 1.0 × 1014 |
| Flame Retardancy | UL 94 | Class | V-0 |
| Operating Temperature Range | — | °C | −40 to +200 |
Recommended Curing Schedule
| Cure Option | Condition | Duration | Notes |
| Room-temperature cure | 25 °C | 4–8 h | Full cure at ambient temperature |
| Heat-accelerated cure | 80 °C | 30 min | Fast cure; ensure even heating |
| Two-stage cure (recommended) | Tack-free at RT + 80 °C | 30 min at 80 °C | Best balance of flow and final properties |
Mixing and Potting Procedure
- Pre-mix: stir Component A thoroughly because fillers may settle during storage; shake or stir Component B until homogeneous.
- Weighing: weigh A and B by weight, not by volume, on a precision electronic scale at the 1:1 ratio.
- Mixing: mix until the colour is uniform, scraping the container walls and bottom; avoid whipping in air.
- Degassing (optional): for void-sensitive modules, degas under vacuum before pouring.
- Pouring: pour into the clean, dry housing within the pot life and ensure complete coverage without trapped air.
- Curing: cure per the schedule above and do not move or stress the part during cure.
Cure inhibition warning for engineers
Addition-cure silicones can fail to cure on contact with organotin or tin-containing silicones, sulphur and polysulphide compounds, amines, polyurethane rubber, ammonia, phosphorus compounds, organic acids, and solder flux residues. Do not use it in contact with condensation-cure (acetoxy) silicone, epoxy or polyurethane. Clean substrates and tools, or run a trial cure on the actual housing before mass production.
Packaging and Storage
| Component | Package Size | Container Type |
| Component A | 25 kg | Plastic barrel |
| Component B | 25 kg | Plastic barrel |
| Kit (A+B) | 50 kg / set | — |
- Store sealed at 5–25 °C in a cool, dry, ventilated area, protected from sunlight, moisture and extreme temperature
- Shelf life: 6 months from date of manufacture under recommended storage
- Material past shelf life should be inspected and tested before use; do not use if appearance or viscosity has changed significantly
- Classified as non-dangerous goods for transport

Potting application in automotive power electronics
For Buyers: Supply Terms
| Item | Detail |
| Minimum order quantity | 1 kg for trial orders; 25 kg A + 25 kg B sets for production |
| Price | Negotiable; volume pricing on request |
| Packaging | 25 kg A + 25 kg B plastic barrels, 50 kg per set |
| Lead time | 3–4 working days after order confirmation |
| Documentation | TDS, MSDS and COA provided; RoHS and REACH declarations on request |
| Monthly capacity | 50 tons per month |
| Support | Sample trial, mixing ratio verification and curing schedule tuning for your housing |
Who This Product Is For
Factory owners
One potting step replaces separate gap filler, insulation and flame barriers. 80 °C / 30 min cure fits existing ovens, and 50 kg kits reduce handling and waste.
Procurement teams
Stable 1:1 ratio simplifies stock control, 6-month shelf life with clear storage rules, and Shenzhen port shipping to Vietnam, Thailand, Indonesia, Malaysia and the Philippines.
Technical engineers
Full cured-property data, GB/T and UL test references, plus an explicit cure-inhibition list so prototype runs do not fail on contaminated substrates.
Product managers
Positioned for 400 V and 800 V DC-DC converters and on-board wireless charging modules where V-0 flame rating and −40 to +200 °C elasticity are design requirements.
Potting Compound vs Thermal Grease vs Thermal Pad
| Material | Function | Typical use | Limit |
| Thermal potting compound (HN-8830A/B) | Encapsulates the whole module: heat transfer, insulation, mechanical fixing, V-0 flame protection | DC-DC converters, on-board chargers, wireless charging modules | Requires mixing, weighing and cure time |
| Thermal grease | Thin interface layer between two flat surfaces | CPU, GPU, IGBT baseplate to heat sink | No encapsulation, no flame protection, pump-out risk |
| Thermal pad | Pre-cut gap filler with fixed thickness | Between chassis and PCB, uneven gaps | Needs mechanical pressure, limited conformability |
Frequently Asked Questions
What is the thermal conductivity of HN-8830A/B?3.0 ± 0.1 W/m·K, measured by GB/T 38712-2020 on the cured elastomer.
What is the mix ratio?1:1 by weight, not by volume. A precision scale is required; the mixed viscosity is 11000 ± 2000 mPa·s.
Can it cure at room temperature?Yes. Full cure takes 4–8 hours at 25 °C, or 30 minutes at 80 °C for heat-accelerated production.
How long is the pot life?60–180 minutes for a 100 g mix at 25 °C. Larger batches generate more exotherm and shorten working time.
Is it suitable for automotive DC-DC converters?Yes. It is designed for high-power electronics including NEV DC-DC converters, on-board chargers and wireless charging modules, with UL 94 V-0 rating and −40 to +200 °C elasticity.
Does it provide electrical insulation?Yes. Volume resistivity is ≥ 1.0 × 1014 Ω·cm at DC 500 V, which supports high-voltage isolation inside compact housings.
Why would an addition-cure silicone fail to cure?Cure inhibition comes from tin catalysts, sulphur, amines, polyurethane, ammonia, phosphorus, organic acids and flux residues, or from contact with acetoxy silicone, epoxy or polyurethane. Clean tools and substrates, or trial-cure on the real housing.
What hardness does the cured elastomer have?Shore A 35 ± 8, soft enough to absorb thermal expansion and vibration without stressing solder joints.
What is the minimum order quantity and shelf life?MOQ is 1 kg for trial orders, with 25 kg A + 25 kg B sets for production runs; shelf life is 6 months when stored sealed at 5–25 °C.
Do you supply to Southeast Asia?Yes. We ship from Shenzhen to Vietnam, Thailand, Indonesia, Malaysia and the Philippines, with TDS, MSDS and COA documents and sample trials before volume orders.
Potting trial for your DC-DC converter or wireless charging module?
Send your housing size, component height, target curing schedule and annual volume. We reply with the matched HN-8830A/B pack size, TDS and MSDS within one working day.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews