HN-8840A/B is a two-component, addition-cure (platinum-catalysed) silicone potting compound with an ultra-high thermal conductivity of 4.0 W/m·K. It is formulated for high-power electronic assemblies that require both efficient heat dissipation and long-term dielectric protection. The compound uses a 1:1 mix ratio by weight, shows good fluidity and self-levelling behaviour in deep housings, and can be cured at room temperature or accelerated at 80 °C in 30 minutes. The cured elastomer remains rubber-elastic from −40 °C to 200 °C and meets UL94 V-0 flame retardancy.
![]()
![]()
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance, Component A | Visual | — | White liquid |
| Appearance, Component B | Visual | — | Grey liquid |
| Base Chemistry | — | — | Polysiloxane, addition cure |
| Viscosity, Component A | GB/T 2794 / 25 °C | mPa·s | 13,500 ± 2,000 |
| Viscosity, Component B | GB/T 2794 / 25 °C | mPa·s | 11,000 ± 2,000 |
| Density, A and B | GB/T 13354 / 25 °C | g/cm³ | 2.95 ± 0.02 |
| Mix Ratio (A:B) | By weight | — | 1:1 |
| Mixed Viscosity | 25 °C | mPa·s | 13,000 ± 2,000 |
| Mixed Density | 25 °C | g/cm³ | 2.95 ± 0.02 |
| Pot Life / Operating Time | 25 °C / 100 g mix | min | 60–180 |
| Cure Time, Room Temperature | 25 °C | h | 4–8 |
| Cure Time, Heat Accelerated | 80 °C | min | 30 |
| Appearance, Cured | Visual | — | Grey elastomer |
| Hardness | GB/T 531.1 | Shore A | 45 ± 8 |
| Thermal Conductivity | GB/T 38712-2020 | W/m·K | 4.0 ± 0.1 |
| Volume Resistivity | GB/T 31838.2-2019 / DC 500 V | Ω·cm | ≥1.0 × 1014 |
| Flame Retardancy | UL 94 | Class | V-0 |
| Operating Temperature Range | — | °C | −40 to 200 |
All values are measured under standard conditions (25 °C, 50–60% RH) after the recommended cure schedule and are for reference only. Please request the current TDS and MSDS before design freeze.
This addition-cure silicone may fail to cure when it contacts organotin or tin-containing silicones, sulfur or polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances, organic acids or solder flux residues. Do not mix or use it in contact with condensation-cure (acetoxy) silicone rubber, epoxy resin or polyurethane. Clean all substrates, fixtures and mixing tools before use. We provide a substrate compatibility checklist for new production lines.
| Item | Details |
|---|---|
| Component A | 25 kg plastic barrel |
| Component B | 25 kg plastic barrel |
| Kit (A+B) | 50 kg / set |
| Storage | 5–25 °C, cool dry well-ventilated area, sealed containers, away from direct sunlight |
| Shelf Life | 6 months from date of manufacture under recommended storage |
| Transportation | Non-dangerous goods (general chemicals) |
| OEM / ODM | Private label, custom formulation, custom packaging and SEA warehouse delivery available |
Q1: What is the thermal conductivity of HN-8840A/B?
HN-8840A/B achieves 4.0 ± 0.1 W/m·K when tested to GB/T 38712-2020 after the recommended cure. This is one of the highest values in our silicone potting range and suits BMS boards, power modules and battery packs with concentrated heat loads.
Q2: What is the mix ratio, pot life and cure time?
The mix ratio is 1:1 by weight. Pot life is 60–180 minutes at 25 °C for a 100 g mix. Cure takes 4–8 hours at 25 °C or 30 minutes at 80 °C. Mixed viscosity is 13,000 ± 2,000 mPa·s and cured hardness is Shore A 45 ± 8.
Q3: Can it be used for BMS, EV battery modules and energy storage systems?
Yes. HN-8840A/B is designed for BMS boards, EV and HEV battery modules, BESS energy storage cabinets, DC-DC converters, on-board chargers, charging piles and photovoltaic inverters. It provides UL94 V-0 flame retardancy, ≥1.0 × 1014 Ω·cm volume resistivity and a −40 to 200 °C service range.
Q4: Which cure option is better for mass production?
For high-volume lines, the 80 °C / 30 minute heat-accelerated cure reduces fixture time and increases throughput. For low-volume or heat-sensitive assemblies, room-temperature cure in 4–8 hours avoids oven investment. The two-stage schedule is recommended for deep housings.
Q5: What documents, packaging and MOQ are available for Southeast Asian buyers?
TDS, MSDS, RoHS and REACH declarations are provided for customs and EHS review. Standard packaging is 25 kg per barrel or 50 kg per A+B set, with OEM labels and custom packaging available. MOQ is 1 kg for evaluation, lead time is 7–10 days, and the product ships as non-dangerous goods.
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
![]()
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews