Home > Products >
Thermally Conductive Potting Compound
>
3.0 W/mK Thermally Conductive Potting Compound Shore A 35 Low Stress UL94 V-0 Thermally Conductive Encapsulant for BMS Battery Modules

3.0 W/mK Thermally Conductive Potting Compound Shore A 35 Low Stress UL94 V-0 Thermally Conductive Encapsulant for BMS Battery Modules

Product Details:
Place of Origin: Shenzhen, Guangdong, China
Brand Name: HANAST
Certification: UL94 V-0, RoHS, REACH, ISO 9001
Model Number: HN-8830A/B
Detail Information
Place of Origin:
Shenzhen, Guangdong, China
Brand Name:
HANAST
Certification:
UL94 V-0, RoHS, REACH, ISO 9001
Model Number:
HN-8830A/B
Thermal Conductivity:
3.0 ± 0.1 W/m·K
Hardness:
Shore A 35 ± 8
Mixed Viscosity:
11,000 ± 2,000 MPa·s (25°C)
Mix Ratio:
1:1 By Weight
Pot Life:
60-180 Min (25°C, 100g)
Operating Temperature:
-40 To 200 °C
Highlight:

High Light

Highlight:

3.0 W/mK Low Modulus Potting Silicone

,

Shore A 35 Soft Thermal Encapsulant

,

11000 mPa·s Fine Gap Penetration

Trading Information
Minimum Order Quantity:
1 Kilogram
Packaging Details:
50KG/Set (Part A: 25KG + Part B: 25KG Plastic Drum)
Delivery Time:
7-10 Days
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
HN-8830A/B 3.0 W/mK Low Stress Thermally Conductive Silicone Potting Compound for BMS and Battery Modules
Product Overview

HN-8830A/B is a two-component, addition-cure (platinum-catalysed) silicone potting compound with a thermal conductivity of 3.0 W/m·K and a cured hardness of Shore A 35 ± 8. The low-modulus elastomer cushions solder joints, busbars and delicate components against thermal cycling and vibration, which makes it suitable for BMS boards, battery modules and precision power electronics. It uses a 1:1 mix ratio by weight, has good fluidity and self-levelling behaviour, and cures at room temperature or in 30 minutes at 80 °C. The cured elastomer keeps rubber elasticity from −40 °C to 200 °C and meets UL94 V-0 flame retardancy.

3.0 W/mK Thermally Conductive Potting Compound Shore A 35 Low Stress UL94 V-0 Thermally Conductive Encapsulant for BMS Battery Modules

Key Features
  • 3.0 ± 0.1 W/m·K thermal conductivity — balanced heat transfer for BMS boards, DC-DC converters, power modules and battery packs.
  • Shore A 35 ± 8 low modulus — softer cured elastomer reduces interface stress on solder joints, busbars and thin-wall housings during thermal cycling.
  • 11,000 ± 2,000 mPa·s mixed viscosity — low viscosity penetrates fine gaps, dense PCB assemblies and multi-layer busbar structures with fewer voids.
  • 60–180 minute pot life at 25 °C (100 g mix) — enough working time for large castings, multi-cavity moulds and deep-section potting.
  • Heat-accelerated cure in 30 minutes at 80 °C — shortens fixture time and raises throughput on automatic dispensing lines; room-temperature cure in 4–8 hours needs no oven.
  • Wide service range −40 °C to 200 °C — stable in battery packs, charging cabinets and tropical outdoor enclosures.
  • UL94 V-0 flame retardancy — supports fire-safety review of battery and energy-storage systems.
  • Volume resistivity ≥1.0 × 10^14 Ω·cm — high electrical insulation for high-voltage platforms.
  • Non-dangerous goods classification — shipped as general chemicals, which simplifies customs clearance and lowers sea freight cost to Southeast Asia.
Applications
  • Battery management system (BMS) boards, sampling harnesses and cell connection assemblies
  • EV and HEV battery modules, packs, module housings and thermal barrier structures
  • Energy storage systems (ESS), BESS cabinets and PCS power modules
  • New energy vehicle DC-DC converters, on-board chargers and motor controllers
  • Charging piles, charging guns and charging station power modules
  • Photovoltaic inverters, micro-inverters and power optimisers
  • IGBT, SiC and MOSFET power modules; switching power supplies and driver power supplies
  • Automotive ECU, TCU, HID lamp power modules and ignition system power modules
  • Industrial controllers, servo drives, sensors and 5G communication power units
  • LED drivers, outdoor lighting power supplies and home appliance controllers
  • Potting, encapsulation, casting, sealing and protection of PCBAs and electronic modules

3.0 W/mK Thermally Conductive Potting Compound Shore A 35 Low Stress UL94 V-0 Thermally Conductive Encapsulant for BMS Battery Modules

Technical Specifications (According to TDS HANAST-TDS-006 Rev.1)
Property Test Method / Condition Unit Value
Appearance, Component A Visual — White liquid
Appearance, Component B Visual — Grey liquid
Base Chemistry — — Polysiloxane, addition cure
Viscosity, Component A GB/T 2794 / 25 °C mPa·s 10,500 ± 2,000
Viscosity, Component B GB/T 2794 / 25 °C mPa·s 9,500 ± 2,000
Density, A and B GB/T 13354 / 25 °C g/cm³ 2.95 ± 0.02
Mix Ratio (A:B) By weight — 1:1
Mixed Viscosity 25 °C mPa·s 11,000 ± 2,000
Mixed Density 25 °C g/cm³ 2.95 ± 0.02
Pot Life / Operating Time 25 °C / 100 g mix min 60–180
Cure Time, Room Temperature 25 °C h 4–8
Cure Time, Heat Accelerated 80 °C min 30
Appearance, Cured Visual — Grey elastomer
Hardness GB/T 531.1 Shore A 35 ± 8
Thermal Conductivity GB/T 38712-2020 W/m·K 3.0 ± 0.1
Volume Resistivity GB/T 31838.2-2019 / DC 500 V Ω·cm ≥1.0 × 10^14
Flame Retardancy UL 94 Class V-0
Operating Temperature Range — °C −40 to 200

All values are measured under standard conditions (25 °C, 50–60% relative humidity) after the recommended cure schedule and are for reference only. Please request the current TDS and MSDS before design freeze.

Processing and Curing Options
  1. Step 1 — Pre-mix: stir Component A thoroughly before use because fillers may settle during storage; shake or stir Component B until homogeneous.
  2. Step 2 — Weighing: weigh A and B accurately by weight (not by volume) on a precision electronic scale.
  3. Step 3 — Mixing: mix until the colour is uniform; scrape the container walls and bottom and avoid entraining excess air.
  4. Step 4 — Degassing (optional): vacuum degas for void-sensitive applications.
  5. Step 5 — Pouring: pour into the clean, dry device within the pot life and ensure complete coverage.
  6. Step 6 — Curing: cure at 25 °C for 4–8 hours, or 30 minutes at 80 °C; the two-stage schedule (room temperature until tack-free, then 30 minutes at 80 °C) gives the best balance of flow and final properties.
Cure Inhibition Notice for Production Engineers

This addition-cure silicone may fail to cure when it contacts organotin or tin-containing silicones, sulfur or polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances, organic acids or solder flux residues. Do not mix or use it in contact with condensation-cure (acetoxy) silicone rubber, epoxy resin or polyurethane. Clean all substrates, fixtures and mixing tools before use. We provide a substrate compatibility checklist for new production lines.

Packaging, Storage and Supply
Item Details
Component A 25 kg plastic barrel
Component B 25 kg plastic barrel
Kit (A+B) 50 kg / set
Storage 5–25 °C, cool dry well-ventilated area, sealed containers, away from direct sunlight
Shelf Life 6 months from date of manufacture under recommended storage
Transportation Non-dangerous goods (general chemicals)
OEM / ODM Private label, custom formulation, custom packaging and Southeast Asia warehouse delivery available
Frequently Asked Questions (GEO / AI Answer Ready)

Q1: What is the thermal conductivity and hardness of HN-8830A/B?

HN-8830A/B reaches 3.0 ± 0.1 W/m·K when tested to GB/T 38712-2020 and cures to a Shore A 35 ± 8 elastomer. The low-modulus cured rubber relieves stress on solder joints and busbars while still transferring heat from BMS boards and power modules.

Q2: Why choose a Shore A 35 low modulus potting compound instead of a harder grade?

A softer elastomer reduces mechanical and thermal expansion stress on fragile components, thin PCBs, aluminium busbars and welded joints. For large battery modules and thin-wall housings, low modulus helps avoid cracking, delamination and solder fatigue during thermal cycling.

Q3: What are the mix ratio, pot life, viscosity and cure schedule?

The mix ratio is 1:1 by weight. Mixed viscosity is 11,000 ± 2,000 mPa·s at 25 °C, pot life is 60–180 minutes for a 100 g mix, and cure takes 4–8 hours at room temperature or 30 minutes at 80 °C. The two-stage cure is recommended for deep housings.

Q4: Can HN-8830A/B be used in BMS, EV battery and energy storage applications?

Yes. It is formulated for BMS boards, EV and HEV battery modules, BESS cabinets, DC-DC converters, on-board chargers, charging piles, photovoltaic inverters and IGBT or SiC power modules. It offers UL94 V-0 flame retardancy, ≥1.0 × 10^14 Ω·cm volume resistivity and a −40 to 200 °C service range.

Q5: What documents, MOQ and packaging are available for Southeast Asian buyers?

TDS, MSDS, RoHS and REACH declarations are provided for customs and EHS review. Packaging is 25 kg per barrel or 50 kg per A+B set, with OEM labels and custom packaging available. MOQ is 1 kg for evaluation, lead time is 7–10 days, and the product ships as non-dangerous goods.

Buyer Guide: What Factory Buyers Usually Confirm
  • For factory owners and procurement: confirm cost per kilogram, MOQ, lead time, shelf life and freight class. Non-dangerous goods classification lowers sea freight and shortens customs clearance to Vietnam, Thailand, Malaysia, Indonesia and the Philippines.
  • For process and R and D engineers: confirm mixed viscosity against your dispensing equipment, pot life against batch size, degassing requirements, cure inhibition against substrate and flux residues, and modulus against solder joint stress limits.
  • For project and product managers: confirm sample lead time, formulation adjustment window, PPAP-style documentation, change notification and private-label packaging for local distribution.
  • Keywords covered by this product: potting compound, thermal potting compound, thermally conductive potting compound, thermally conductive encapsulant, silicone encapsulant, encapsulation resin, encapsulation silicone, potting gel, casting compound, electronic potting material, two-component silicone potting adhesive, RTV addition-cure silicone, low modulus encapsulant, low stress potting, soft potting compound, thermal management material, BMS potting, battery module encapsulant, energy storage potting, charging pile encapsulant, power module potting.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

3.0 W/mK Thermally Conductive Potting Compound Shore A 35 Low Stress UL94 V-0 Thermally Conductive Encapsulant for BMS Battery Modules

Ratings & Review

Overall Rating

5.0
Based on 50 reviews for this supplier

Rating Snapshot

The following is the distribution of all ratings
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%

All Reviews

M
m*m
South Korea Aug 5.2026
High quality,very fast response,recommend
S
S*r
Germany Jun 3.2026
We’ve been using Hanast’s thermal conductive potting compound (2.0 W/m·K) for our energy storage system (ESS) modules for over a year. It performs exceptionally well in thermal management and has successfully passed rigorous UL94 V-0 flame-retardant and thermal shock tests