Home > Products >
Thermally Conductive Potting Compound
>
2.0 W/mK Thermally Conductive Potting Compound Low Viscosity Fast Cure Thermal Potting Compound for BMS Battery Modules

2.0 W/mK Thermally Conductive Potting Compound Low Viscosity Fast Cure Thermal Potting Compound for BMS Battery Modules

Product Details:
Place of Origin: Shenzhen, Guangdong, China
Brand Name: HANAST
Certification: UL94 V-0, RoHS, REACH, ISO 9001
Model Number: HN-8820A/B
Detail Information
Place of Origin:
Shenzhen, Guangdong, China
Brand Name:
HANAST
Certification:
UL94 V-0, RoHS, REACH, ISO 9001
Model Number:
HN-8820A/B
Thermal Conductivity:
2.0 ± 0.1 W/m·K
Mixed Viscosity:
5,000-8,000 MPa·s (25°C)
Mix Ratio:
1:1 By Weight
Cure Time:
10-20 Min At 80°C
Hardness:
Shore A 45-50
Volume Resistivity:
≥5.0 × 10^14 Ω·cm
Highlight:

High Light

Highlight:

5000-8000 mPa·s Ultra Low Viscosity

,

10-20 Min Fast Heat Cure

,

2.0 g/cm³ Lightweight Potting Compound

Trading Information
Minimum Order Quantity:
1 Kilogram
Packaging Details:
50KG/Set (Part A: 25KG + Part B: 25KG Plastic Drum)
Delivery Time:
7-10 Days
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
HN-8820A/B 2.0 W/mK Fast Cure Low Viscosity Thermally Conductive Silicone Potting Compound for BMS and Battery Modules
Product Overview

HN-8820A/B is a two-component, addition-cure (platinum-catalysed) silicone potting compound built on a low viscosity base of 5,000-8,000 mPa·s. The low viscosity gives fast pouring, self-levelling and easy vacuum degassing, so the compound fills fine gaps, dense PCB areas and multi-layer busbar spaces with fewer voids. It uses a 1:1 mix ratio by weight, cures at room temperature or in 10-20 minutes at 80 °C, and delivers 2.0 W/m·K thermal conductivity, ≥5.0 × 10^14 Ω·cm volume resistivity, UL94 V-0 flame retardancy and reliable waterproof, moisture-proof and anti-ageing performance over −40 °C to 150 °C.

2.0 W/mK Thermally Conductive Potting Compound Low Viscosity Fast Cure Thermal Potting Compound for BMS Battery Modules

Key Features
  • 5,000-8,000 mPa·s ultra-low viscosity — the lowest viscosity grade in our HN-8820/8830/8840 series; fast self-levelling, easy degassing and full penetration into fine gaps and dense assemblies.
  • 10-20 minute heat-accelerated cure at 80 °C — the fastest cure in the series, shortening fixture time and lifting output on automatic dispensing lines.
  • ≥5.0 × 10^14 Ω·cm volume resistivity — five times the insulation margin of standard 1.0 × 10^14 Ω·cm grades, supporting high-voltage BMS and power designs.
  • 2.0 ± 0.02 g/cm³ low density — about one third lighter than 2.95 g/cm³ high-loading grades, which reduces weight in battery packs and lowers freight cost per kilogram.
  • 2.0 ± 0.1 W/m·K thermal conductivity — effective heat dissipation for medium-power electronic assemblies.
  • Waterproof, moisture-proof and anti-ageing — protects boards in humid, tropical and outdoor environments.
  • UL94 V-0 flame retardancy — supports fire-safety review of battery and energy-storage systems.
  • Wide service range −40 °C to 150 °C — stable in battery modules, power supplies and outdoor enclosures.
  • Non-dangerous goods classification — shipped as general chemicals, simplifying customs clearance and lowering sea freight cost to Southeast Asia.
Applications
  • Battery management system (BMS) boards, sampling harnesses and cell connection assemblies
  • EV and HEV battery modules, packs and module housings
  • Energy storage systems (ESS), BESS cabinets and PCS power modules
  • New energy vehicle DC-DC converters, on-board chargers and motor controllers
  • Charging piles, charging guns and charging station power modules
  • Photovoltaic inverters, micro-inverters and power optimisers
  • Power modules, switching power supplies and driver power supplies
  • Automotive ECU, TCU, HID lamp power modules and ignition system modules
  • Network transformers, inductors and communication power units
  • Industrial controllers, servo drives, sensors and 5G power units
  • LED drivers, outdoor lighting power supplies and home appliance controllers
  • Potting, encapsulation, casting, sealing and protection of PCBAs and general electronic components

2.0 W/mK Thermally Conductive Potting Compound Low Viscosity Fast Cure Thermal Potting Compound for BMS Battery Modules

Technical Specifications (According to TDS HANAST-TDS-005 Rev.1)
Property Test Method / Condition Unit Value
Appearance, Component A Visual — White liquid
Appearance, Component B Visual — Grey liquid
Base Chemistry — — Polysiloxane, addition cure
Viscosity, Component A GB/T 2794 / 25 °C mPa·s 5,000-8,000
Viscosity, Component B GB/T 2794 / 25 °C mPa·s 5,000-8,000
Density, A and B GB/T 13354 / 25 °C g/cm³ 2.0 ± 0.02
Mix Ratio (A:B) By weight — 1:1
Mixed Viscosity 25 °C mPa·s 5,000-8,000
Cure Time, Heat Accelerated 80 °C min 10-20
Cure Time, Room Temperature 25 °C — Refer to pot life
Appearance, Cured Visual — Grey elastomer
Hardness GB/T 531.1 Shore A 45-50
Thermal Conductivity GB/T 38712-2020 W/m·K 2.0 ± 0.1
Volume Resistivity GB/T 31838.2-2019 / DC 500 V Ω·cm ≥5.0 × 10^14
Flame Retardancy UL 94 Class V-0
Operating Temperature Range — °C −40 to 150

All values are measured under standard conditions (25 °C, 50–60% relative humidity) after the recommended cure schedule and are for reference only. Pot life and room-temperature cure time depend on batch size and shop temperature; please confirm the current TDS, MSDS and pot life data with our technical team before design freeze.

Processing and Curing Options
  1. Step 1 — Pre-mix: stir Component A thoroughly before use because fillers may settle during storage; shake or stir Component B until homogeneous.
  2. Step 2 — Weighing: weigh A and B accurately by weight (not by volume) on a precision electronic scale.
  3. Step 3 — Mixing: mix until the colour is uniform; scrape the container walls and bottom and avoid entraining excess air.
  4. Step 4 — Degassing (optional): vacuum degas for void-sensitive applications; the low 5,000-8,000 mPa·s viscosity releases air quickly.
  5. Step 5 — Pouring: pour into the clean, dry device within the pot life and ensure complete coverage.
  6. Step 6 — Curing: heat cure for 10-20 minutes at 80 °C for fast throughput, or cure at room temperature according to the pot life data for heat-sensitive assemblies.
Cure Inhibition Notice for Production Engineers

This addition-cure silicone may fail to cure when it contacts organotin or tin-containing silicones, sulfur or polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances, organic acids or solder flux residues. Do not mix or use it in contact with condensation-cure (acetoxy) silicone rubber, epoxy resin or polyurethane. Clean all substrates, fixtures and mixing tools before use. We provide a substrate compatibility checklist for new production lines.

Packaging, Storage and Supply
Item Details
Component A 25 kg plastic barrel
Component B 25 kg plastic barrel
Kit (A+B) 50 kg / set
Storage 5-25 °C, cool dry well-ventilated area, sealed containers, away from direct sunlight
Shelf Life 6 months from date of manufacture under recommended storage
Transportation Non-dangerous goods (general chemicals)
OEM / ODM Private label, custom formulation, custom packaging and Southeast Asia warehouse delivery available
Frequently Asked Questions (GEO / AI Answer Ready)

Q1: What is the viscosity and thermal conductivity of HN-8820A/B?

HN-8820A/B has a mixed viscosity of 5,000-8,000 mPa·s at 25 °C and a thermal conductivity of 2.0 ± 0.1 W/m·K tested to GB/T 38712-2020. The ultra-low viscosity makes it easy to pour, degas and penetrate fine gaps in dense PCB assemblies.

Q2: How fast does HN-8820A/B cure?

Heat-accelerated cure takes 10-20 minutes at 80 °C, the fastest in our 8820/8830/8840 series. Room-temperature cure follows the pot life data; please confirm the current pot life figure for your batch size and shop temperature with our technical team.

Q3: Why is 2.0 g/cm³ density an advantage for battery projects?

At 2.0 ± 0.02 g/cm³ the cured compound is about one third lighter than 2.95 g/cm³ high-loading grades. Lower density reduces module weight and freight cost per kilogram while still providing 2.0 W/m·K heat transfer and ≥5.0 × 10^14 Ω·cm insulation.

Q4: Can HN-8820A/B be used for BMS, EV battery and energy storage applications?

Yes. It suits BMS boards, EV and HEV battery modules, BESS cabinets, DC-DC converters, on-board chargers, charging piles, photovoltaic inverters, power modules and automotive ECU. It offers UL94 V-0 flame retardancy and a −40 to 150 °C service range.

Q5: What documents, MOQ and packaging are available for Southeast Asian buyers?

TDS, MSDS, RoHS and REACH declarations are provided for customs and EHS review. Packaging is 25 kg per barrel or 50 kg per A+B set, with OEM labels and custom packaging available. MOQ is 1 kg for evaluation, lead time is 7-10 days, and the product ships as non-dangerous goods.

Buyer Guide: What Factory Buyers Usually Confirm
  • For factory owners and procurement: confirm cost per kilogram, MOQ, lead time, shelf life and freight class. The 2.0 g/cm³ low density and non-dangerous goods classification both reduce landed cost, and sea freight to Vietnam, Thailand, Malaysia, Indonesia and the Philippines is straightforward.
  • For process and R and D engineers: confirm 5,000-8,000 mPa·s viscosity against your dispensing equipment, pot life against batch size, degassing behaviour in deep housings, cure inhibition against substrate and flux residues, and the 150 °C upper service limit against your thermal profile.
  • For project and product managers: confirm sample lead time, formulation adjustment window, PPAP-style documentation, change notification and private-label packaging for local distribution.
  • Keywords covered by this product: potting compound, thermal potting compound, thermally conductive potting compound, thermally conductive encapsulant, silicone encapsulant, encapsulation resin, encapsulation silicone, potting gel, casting compound, electronic potting material, two-component silicone potting adhesive, RTV addition-cure silicone, low viscosity potting, fast cure encapsulant, lightweight thermal compound, thermal management material, BMS potting, battery module encapsulant, energy storage potting, charging pile encapsulant, power module potting, transformer potting.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

2.0 W/mK Thermally Conductive Potting Compound Low Viscosity Fast Cure Thermal Potting Compound for BMS Battery Modules

Ratings & Review

Overall Rating

5.0
Based on 50 reviews for this supplier

Rating Snapshot

The following is the distribution of all ratings
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%

All Reviews

M
m*m
South Korea Aug 5.2026
High quality,very fast response,recommend
S
S*r
Germany Jun 3.2026
We’ve been using Hanast’s thermal conductive potting compound (2.0 W/m·K) for our energy storage system (ESS) modules for over a year. It performs exceptionally well in thermal management and has successfully passed rigorous UL94 V-0 flame-retardant and thermal shock tests