HN-8820A/B is a two-component, addition-cure silicone potting compound formulated for waterproof, moisture-proof and anti-ageing protection of electronic assemblies. It combines 2.0 W/m·K thermal conductivity, UL94 V-0 flame retardancy, ≥5.0 × 10^14 Ω·cm volume resistivity and a 2.0 g/cm³ low density in a 1:1 mix ratio system. With 5,000-8,000 mPa·s mixed viscosity the compound self-levels and penetrates dense PCB assemblies, then cures at room temperature or in 10-20 minutes at 80 °C. It is designed for LED drivers, PCB encapsulation, power modules and BMS boards operating in −40 °C to 150 °C, including hot and humid Southeast Asian service conditions.
![]()
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance, Component A | Visual | — | White liquid |
| Appearance, Component B | Visual | — | Grey liquid |
| Base Chemistry | — | — | Polysiloxane, addition cure |
| Viscosity, Component A | GB/T 2794 / 25 °C | mPa·s | 5,000-8,000 |
| Viscosity, Component B | GB/T 2794 / 25 °C | mPa·s | 5,000-8,000 |
| Density, A and B | GB/T 13354 / 25 °C | g/cm³ | 2.0 ± 0.02 |
| Mix Ratio (A:B) | By weight | — | 1:1 |
| Mixed Viscosity | 25 °C | mPa·s | 5,000-8,000 |
| Cure Time, Heat Accelerated | 80 °C | min | 10-20 |
| Cure Time, Room Temperature | 25 °C | — | Refer to pot life |
| Appearance, Cured | Visual | — | Grey elastomer |
| Hardness | GB/T 531.1 | Shore A | 45-50 |
| Thermal Conductivity | GB/T 38712-2020 | W/m·K | 2.0 ± 0.1 |
| Volume Resistivity | GB/T 31838.2-2019 / DC 500 V | Ω·cm | ≥5.0 × 10^14 |
| Flame Retardancy | UL 94 | Class | V-0 |
| Operating Temperature Range | — | °C | −40 to 150 |
All values are measured under standard conditions (25 °C, 50–60% relative humidity) after the recommended cure schedule and are for reference only. Pot life and room-temperature cure time depend on batch size and shop temperature; please confirm the current TDS, MSDS and pot life data with our technical team before design freeze. Ingress protection rating depends on housing design, sealing method and process control, and should be validated on your finished assembly.
This addition-cure silicone may fail to cure when it contacts organotin or tin-containing silicones, sulfur or polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances, organic acids or solder flux residues. Do not mix or use it in contact with condensation-cure (acetoxy) silicone rubber, epoxy resin or polyurethane. Clean all substrates, fixtures and mixing tools before use. We provide a substrate compatibility checklist for new production lines.
| Item | Details |
|---|---|
| Component A | 25 kg plastic barrel |
| Component B | 25 kg plastic barrel |
| Kit (A+B) | 50 kg / set |
| Storage | 5-25 °C, cool dry well-ventilated area, sealed containers, away from direct sunlight |
| Shelf Life | 6 months from date of manufacture under recommended storage |
| Transportation | Non-dangerous goods (general chemicals) |
| OEM / ODM | Private label, custom formulation, custom packaging and Southeast Asia warehouse delivery available |
Q1: Is HN-8820A/B waterproof and suitable for humid Southeast Asian climates?
Yes. The cured elastomer is waterproof, moisture-proof and anti-ageing, sealing boards against humidity, condensation, splash and salt-laden air. Final ingress protection depends on housing design, sealing method and process control, so validate the finished assembly. TDS, MSDS, RoHS and REACH documents are available for review.
Q2: What flame retardancy and insulation values does HN-8820A/B provide?
HN-8820A/B meets UL94 V-0 flame retardancy and provides volume resistivity of ≥5.0 × 10^14 Ω·cm at DC 500 V, which is five times the margin of standard 1.0 × 10^14 Ω·cm grades. Thermal conductivity is 2.0 ± 0.1 W/m·K tested to GB/T 38712-2020.
Q3: What are the mix ratio, viscosity and cure time?
Mix ratio is 1:1 by weight. Mixed viscosity is 5,000-8,000 mPa·s at 25 °C, so the compound self-levels and penetrates fine gaps. Heat-accelerated cure takes 10-20 minutes at 80 °C; room-temperature cure follows the pot life data, which we confirm for your batch size and shop temperature.
Q4: Can HN-8820A/B be used for BMS, EV battery and energy storage modules?
Yes. It suits BMS boards, EV and HEV battery modules, BESS cabinets, DC-DC converters, on-board chargers, charging piles, photovoltaic inverters and power modules. The −40 to 150 °C service range, UL94 V-0 rating and high insulation make it suitable for medium-power battery electronics.
Q5: Is batch consistency documented, and what are the MOQ and lead time?
Each lot is tested for viscosity, density, hardness, thermal conductivity and flame retardancy, and a COA is issued with every shipment. MOQ is 1 kg for evaluation, lead time is 7-10 days, supply capacity is 50 tons per month, packaging is 25 kg per barrel or 50 kg per A+B set, and the product ships as non-dangerous goods.
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
![]()
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews