HN-8820A/B is a two-component, addition-cure silicone potting compound designed for motor drives, BMS boards and large-volume encapsulation. It combines a 2.0 W/m·K thermal conductivity, 5,000-8,000 mPa·s low viscosity and a 2.0 g/cm³ low density, so one litre of cavity needs roughly one third less material weight than a 2.95 g/cm³ grade. The 1:1 mix ratio and good flow allow deep-section casting of tall housings and multi-cavity moulds, with curing at room temperature or in 10-20 minutes at 80 °C. The cured elastomer provides UL94 V-0 flame retardancy, ≥5.0 × 10^14 Ω·cm volume resistivity and rubber elasticity from −40 °C to 150 °C, cushioning boards and connections against vibration and thermal cycling.
![]()
![]()
| Property | Test Method / Condition | Unit | Value |
|---|---|---|---|
| Appearance, Component A | Visual | — | White liquid |
| Appearance, Component B | Visual | — | Grey liquid |
| Base Chemistry | — | — | Polysiloxane, addition cure |
| Viscosity, Component A | GB/T 2794 / 25 °C | mPa·s | 5,000-8,000 |
| Viscosity, Component B | GB/T 2794 / 25 °C | mPa·s | 5,000-8,000 |
| Density, A and B | GB/T 13354 / 25 °C | g/cm³ | 2.0 ± 0.02 |
| Mix Ratio (A:B) | By weight | — | 1:1 |
| Mixed Viscosity | 25 °C | mPa·s | 5,000-8,000 |
| Cure Time, Heat Accelerated | 80 °C | min | 10-20 |
| Cure Time, Room Temperature | 25 °C | — | Refer to pot life |
| Appearance, Cured | Visual | — | Grey elastomer |
| Hardness | GB/T 531.1 | Shore A | 45-50 |
| Thermal Conductivity | GB/T 38712-2020 | W/m·K | 2.0 ± 0.1 |
| Volume Resistivity | GB/T 31838.2-2019 / DC 500 V | Ω·cm | ≥5.0 × 10^14 |
| Flame Retardancy | UL 94 | Class | V-0 |
| Operating Temperature Range | — | °C | −40 to 150 |
All values are measured under standard conditions (25 °C, 50–60% relative humidity) after the recommended cure schedule and are for reference only. Pot life and room-temperature cure time depend on batch size and shop temperature; please confirm the current TDS, MSDS and pot life data with our technical team before design freeze.
This addition-cure silicone may fail to cure when it contacts organotin or tin-containing silicones, sulfur or polysulfide compounds, amines, polyurethane rubber, ammonia-containing items, phosphorus compounds, acidic substances, organic acids or solder flux residues. Do not mix or use it in contact with condensation-cure (acetoxy) silicone rubber, epoxy resin or polyurethane. Clean all substrates, fixtures and mixing tools before use. We provide a substrate compatibility checklist for new production lines.
| Item | Details |
|---|---|
| Component A | 25 kg plastic barrel |
| Component B | 25 kg plastic barrel |
| Kit (A+B) | 50 kg / set |
| Storage | 5-25 °C, cool dry well-ventilated area, sealed containers, away from direct sunlight |
| Shelf Life | 6 months from date of manufacture under recommended storage |
| Transportation | Non-dangerous goods (general chemicals) |
| OEM / ODM | Private label, custom formulation, custom packaging and Southeast Asia warehouse delivery available |
Q1: How much material does HN-8820A/B save per litre of cavity?
The mixed density is 2.0 ± 0.02 g/cm³, so one litre of cavity needs about 2.0 kg of compound, compared with about 2.95 kg for a 2.95 g/cm³ high-loading grade. That is roughly one third less material weight per litre, which reduces material consumption, module weight and freight cost.
Q2: Is HN-8820A/B suitable for motor drives and BMS boards?
Yes. The cured rubber elastomer cushions PCBs, busbars and connections against vibration, shock and thermal cycling, while 2.0 W/m·K thermal conductivity and ≥5.0 × 10^14 Ω·cm volume resistivity handle heat and insulation requirements. It also meets UL94 V-0 and operates from −40 to 150 °C.
Q3: Can it fill deep housings and large volumes?
The 5,000-8,000 mPa·s mixed viscosity lets the compound flow into tall housings, narrow channels and multi-cavity moulds before gelation. Vacuum degassing is recommended for deep sections, and venting should be planned so air can escape from the bottom of the cavity.
Q4: What are the mix ratio and cure time?
Mix ratio is 1:1 by weight. Heat-accelerated cure takes 10-20 minutes at 80 °C; room-temperature cure follows the pot life data, which we confirm for your batch size and shop temperature. Hardness after cure is Shore A 45-50.
Q5: What documents, MOQ and packaging are available for Southeast Asian buyers?
TDS, MSDS, RoHS and REACH declarations are provided for customs and EHS review. Packaging is 25 kg per barrel or 50 kg per A+B set, with OEM labels and custom packaging available. MOQ is 1 kg for evaluation, lead time is 7-10 days, supply capacity is 50 tons per month, and the product ships as non-dangerous goods.
Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.
We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.
![]()
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews