Home > Products >
Thermal Grease Paste
>
4.0 W/mK Ultra-High Thermal Conductive Silicone Grease Non-Curing Thermal Paste for EV Charger IGBT Heat Sink Cooling

4.0 W/mK Ultra-High Thermal Conductive Silicone Grease Non-Curing Thermal Paste for EV Charger IGBT Heat Sink Cooling

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0, REACH, ISO 9001:2015
Model Number: HN400
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0, REACH, ISO 9001:2015
Model Number:
HN400
Thermal Conductivity:
4.0 ± 0.1 W/m·K (ASTM D5470)
Operating Temperature:
-50 To +200 °C
Penetration:
240 ± 20 (1/10 Mm) At 25 °C
Specific Gravity:
2.61 ± 0.08 G/cm³ At 25 °C
Breakdown Voltage:
1100 V/mm At 0.20 Mm
Volatile Matter:
≤ 0.7% At 200 °C / 24 H
Highlight:

High Light

Highlight:

4.0 W/mK Ultra-High Thermal Conductivity

,

ISO 9001 Factory Direct Engineering Support

,

EV Charger Battery Module Cooling Paste

Trading Information
Minimum Order Quantity:
1 Kilogram (1 kg / 5 kg plastic drums)
Packaging Details:
1 kg and 5 kg plastic drums with TDS, MSDS and COA inside; export carton and pallet; syringe, cartridge and private label packaging on request
Delivery Time:
3-5 working days for stock drums, 7-15 days for custom formulation and private label orders
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
Product Overview

HN400 is a single-component, non-curing, ultra-high thermal conductive silicone grease built on low thermal resistance fillers, with a thermal conductivity of 4.0 ± 0.1 W/m·K. The compound has a fine texture and good spreadability, and quickly and effectively reduces the surface temperature of heat generating elements. It works in ambient and heating scenarios from -50 °C to +200 °C, keeps near-zero free radical content, and resists high and low temperature, water, ozone and weathering. Because the compound is non-curing, it never dries or hardens, so heat sinks and modules can be re-seated and repaired without re-pasting.

Typical buyers for this grade are B2B factories and brand owners who need a repeatable thermal interface material (TIM) for volume assembly lines: EV charger and onboard charger (OBC) modules, IGBT and power modules, motor controllers, battery modules, energy storage cabinets, PV inverters, server and telecom power supplies, LED drivers and home appliances.

4.0 W/mK Ultra-High Thermal Conductive Silicone Grease Non-Curing Thermal Paste for EV Charger IGBT Heat Sink Cooling

Why Factories and Engineering Teams Choose HN400
  • 4.0 ± 0.1 W/m·K ultra-high conductivity (ASTM D5470) – a real step up from standard 1.0–2.0 W/m·K paste, for high heat flux dies, IGBT modules and densely packed power stages.
  • Non-curing for the life of the assembly – stays paste-like indefinitely, tolerates rework, re-seating and field repair, and avoids the dry-out failure mode of curing adhesives.
  • -50 °C to +200 °C operating range – covers cold chain start-up, outdoor cabinets and continuous high duty power cycling.
  • Low oil separation ≤ 0.3% and low volatility ≤ 0.7% at 200 °C / 24 h – controls pump-out and dry-out on vertical and vibration loaded interfaces, and keeps the surrounding surfaces clean.
  • Near-zero free radical content, water / ozone / weathering resistant – the silicone matrix resists oxidation and embrittlement in humid, coastal and outdoor installations.
  • 240 ± 20 (1/10 mm) penetration, thixotropic body – holds position on vertical and inverted interfaces without slumping, while still spreading to a thin bond line (BLT).
  • Process ready – brushing, rolling, stencil and screen printing, syringe / cartridge dispensing and fully automatic dispensing lines, with 1 kg and 5 kg drums plus custom packaging.
  • Factory-direct engineering support – ISO 9001 quality system, RoHS 2.0 compliant material, TDS / MSDS / COA supplied with every shipment, plus custom formulation (viscosity, conductivity, colour) and private label service for OEM and ODM projects.
  • Material compatible – non-corrosive to aluminium, copper and nickel heat sinks and substrates, odourless and non-toxic in normal industrial use.

Important engineering note: HN400 has a breakdown voltage of 1100 V/mm at 0.20 mm. It is designed as a thermal interface for non-energised, non-exposed surfaces between heat sources and heat sinks. Do not apply it to exposed live parts such as bare circuit boards or uninsulated conductors. If your design needs a higher dielectric strength, ask our engineers for a higher breakdown voltage grade.

Technical Data
Property Test Method / Condition Unit Value
Appearance Visual inspection — Grey, glossy, fine paste
Thermal Conductivity ASTM D5470 W/m·K 4.0 ± 0.1
Specific Gravity GB/T 13354-1992 / 25 °C g/cm³ 2.61 ± 0.08
Oil Separation (Oil Bleed) SH/T 0324-1992 / 200 °C, 24 h % ≤ 0.3
Volatile Matter SH/T 0337-92 / 200 °C, 24 h % ≤ 0.7
Penetration (Cone Penetration) GB/T 269-2023 / 25 °C 1/10 mm 240 ± 20
Breakdown Voltage IEC 60243 / 0.20 mm thickness V/mm 1100
Operating Temperature Range — °C -50 to +200
Compliance — — RoHS 2.0

All values are measured under standard conditions and are for reference only. Actual thermal performance may vary with application conditions, bond line thickness and contact pressure.

Applications — Where HN400 Is Specified

HN400 is specified by purchasing teams, mechanical engineers, project managers and product managers in the following applications:

  • New energy vehicle (NEV) and EV powertrain – onboard charger (OBC), DC-DC converter, BMS thermal path, motor controller and inverter, EV charger modules, charging pile power stacks, battery module cold plates.
  • Power electronics – IGBT modules, thyristors, power transistors, power modules, voltage regulators, rectifiers and high heat flux power stages.
  • Energy storage and solar – energy storage system (ESS) cabinets, battery packs, PV inverter and solar inverter assemblies.
  • Data center and telecom – server power supplies, data center heat sinks, 5G communication equipment, microwave devices, microwave communication and microwave transmission equipment, microwave power supplies.
  • Consumer and home appliance – home appliance control boards, consumer electronics modules, CPU assemblies, LED lighting and LED driver heat dissipation interfaces.
  • Automotive electronics and general industrial – automotive electronics, car refrigerators, thermistors, temperature sensors, printer heads, sensor housings and general heat sink assembly.

4.0 W/mK Ultra-High Thermal Conductive Silicone Grease Non-Curing Thermal Paste for EV Charger IGBT Heat Sink Cooling

Application Instructions
  1. Surface preparation – clean all contact surfaces with a solvent to remove grease, dust and oxidation; ensure surfaces are completely dry.
  2. Application – apply directly by brushing, rolling, automatic dispensing or screen printing.
  3. Spreading – transfer a small amount with a clean razor blade, plastic spatula or clean knife and spread evenly to the required thickness.
  4. Thickness control – thinner layers transfer heat better; excess paste does not help and can reduce efficiency. Wipe excess from the edges with a lint-free cloth.
  5. Assembly – assemble the heat sink and heat source immediately after application and torque fasteners to spec to control bond line thickness (BLT).
Packaging, Storage and Shelf Life
Package Size Container Type Notes
1 kg Plastic drum Standard package
5 kg Plastic drum Standard package
Custom sizes — Syringe, cartridge and private label packaging available on request
  • Store in original, tightly sealed containers in a cool, dry, well ventilated area away from direct sunlight; recommended storage temperature below 27 °C.
  • Shelf life: 12 months from date of manufacture when stored unopened and properly sealed.
  • A small amount of silicone oil may separate during storage; this is normal. Stir thoroughly before use and performance is not affected.
  • Transportation: classified as non-dangerous goods (general chemicals). Handle with care to prevent leakage.
  • Industrial / professional use only. Wear nitrile gloves and safety goggles; ensure adequate ventilation and keep containers sealed when not in use.
Quality System and Buyer Support
  • ISO 9001 quality management with in-house testing against ASTM D5470, IEC 60243, GB/T 269-2023 and SH/T 0324-1992 / SH/T 0337-92 before every batch release.
  • Documentation pack – TDS, MSDS and COA supplied with each shipment for your incoming inspection and customer audit files.
  • Custom formulation – conductivity, viscosity / penetration, colour and oil bleed can be tuned to your drawing or process window by our FAE team.
  • OEM / ODM and private label – your brand on the drum, your label on the carton, your language on the documents.
  • Export experience to Southeast Asia – Vietnam, Thailand, Indonesia, Malaysia, the Philippines and Singapore, with export cartons, palletising and shipping documents prepared for factory receiving.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

4.0 W/mK Ultra-High Thermal Conductive Silicone Grease Non-Curing Thermal Paste for EV Charger IGBT Heat Sink Cooling

FAQ — Technical Questions Buyers Ask Q1: What is the thermal conductivity of HN400 and which standard is it tested to?

HN400 has a thermal conductivity of 4.0 ± 0.1 W/m·K measured by ASTM D5470. This places it in the 4 W/m·K class, well above the common 1.0–2.0 W/m·K thermal grease grades used for general heat sink assembly.

Q2: Can HN400 be used on live or exposed electrical parts?

No. HN400 has a breakdown voltage of 1100 V/mm at 0.20 mm thickness, so it is specified for non-energised, non-exposed thermal interfaces between a heat source and a heat sink. Do not apply it to exposed live parts such as bare circuit boards or uninsulated conductors. If your design needs higher dielectric strength, ask us for a higher breakdown voltage grade.

Q3: What is the operating temperature range and does the paste dry out?

HN400 works from -50 °C to +200 °C and is non-curing, so it keeps its paste consistency indefinitely instead of hardening. Oil separation is ≤ 0.3% and volatility ≤ 0.7% at 200 °C for 24 h, which controls pump-out and dry-out on vertical and vibration loaded interfaces.

Q4: What is the minimum order quantity, lead time and sample policy for a factory trial?

Standard MOQ starts at 1 kilogram in 1 kg or 5 kg plastic drums. Free samples for evaluation and drawing verification are available, and pilot orders normally ship from stock in 3 to 5 working days. Custom formulations and private label packaging are quoted after the sample is approved.

Q5: Can you match our own specification or develop a custom formulation?

Yes. Our engineering team adjusts conductivity, penetration / viscosity, colour and oil bleed against your drawing or process window, and supplies TDS, MSDS and COA for your incoming inspection. We also support OEM, ODM and private label programs and ship regularly to Southeast Asian factories.