Home > Products >
Thermal Grease Paste
>
0.82 C.cm2/W Low Thermal Resistance Thermal Grease 3.0 W/mK Thermal Paste with 1850 V/mm Electrical Insulation for EV OBC Power Module Cooling

0.82 C.cm2/W Low Thermal Resistance Thermal Grease 3.0 W/mK Thermal Paste with 1850 V/mm Electrical Insulation for EV OBC Power Module Cooling

Product Details:
Place of Origin: Guangdong, China
Brand Name: Hanast
Certification: RoHS 2.0, ISO 9001:2015
Model Number: HN300
Detail Information
Place of Origin:
Guangdong, China
Brand Name:
Hanast
Certification:
RoHS 2.0, ISO 9001:2015
Model Number:
HN300
Thermal Conductivity:
2.95 ± 0.1 W/m·K
Thermal Resistance:
0.82 °C·cm²/W At 25 PSI
Breakdown Voltage:
1850 V/mm At 0.20 Mm
Operating Temperature:
-40 To +180 °C
Penetration:
350 ± 20 (1/10 Mm) At 25 °C
Specific Gravity:
2.5 ± 0.08 G/cm³ At 25 °C
Highlight:

High Light

Highlight:

0.82 C.cm2/W Low Thermal Resistance

,

1850 V/mm Insulating EV OBC Grease

,

High Filler Loading 2.5 g/cm3 Paste

Trading Information
Minimum Order Quantity:
1 Kilogram (1 kg / 5 kg plastic drums)
Packaging Details:
1 kg and 5 kg plastic drums with TDS, MSDS and COA inside; export carton and pallet; syringe, cartridge and private label packaging on request
Delivery Time:
3-5 working days for stock drums, 7-15 days for custom formulation and private label orders
Payment Terms:
T/T,L/C
Supply Ability:
50 Tons per Month
Product Description
Product Overview

HN300 is a single-component, non-curing, high thermal conductivity insulating silicone grease. It almost never cures and keeps its paste-like state for extended periods within -40 °C to +180 °C. The compound combines excellent electrical insulation with thermal conductivity, has near-zero free radical content, and resists high and low temperature, water, ozone and weathering.

Its two defining numbers for design engineers are thermal resistance 0.82 °C·cm²/W at 25 PSI and breakdown voltage 1850 V/mm at 0.20 mm. In practice this is the middle grade of the range: enough conductivity for power modules and EV onboard chargers, and still enough dielectric strength to isolate a live device from a grounded heat sink — at a lower filler loading and lower cost than the 4–5 W/m·K metal-filled grades.

Typical buyers are B2B factories and brand owners — factory owners, purchasing managers, R&D engineers, project managers and product managers — in new energy vehicle electronics, power supplies, LED lighting, home appliances, communications and industrial equipment.

0.82 C.cm2/W Low Thermal Resistance Thermal Grease 3.0 W/mK Thermal Paste with 1850 V/mm Electrical Insulation for EV OBC Power Module Cooling
Why Factories and Engineering Teams Choose HN300
  • Thermal resistance 0.82 °C·cm²/W at 25 PSI (ASTM D5470) – the number that actually decides junction temperature in a real assembly, quoted at a defined mounting pressure so you can compare it against your current grade.
  • 2.95 ± 0.1 W/m·K, 3 W/m·K class thermal conductivity – a step above 1 W/m·K general purpose paste for power modules, OBC stages and dense LED arrays.
  • 1850 V/mm dielectric strength at 0.20 mm (IEC 60243) – thermal path plus electrical isolation in one layer, for live devices mounted on a common heat sink.
  • High filler loading, specific gravity 2.5 ± 0.08 g/cm³ – a heavily filled but still workable paste, giving thin bond lines without pumping out.
  • Non-curing, reworkable – never dries or hardens, so modules and heat sinks can be dismounted, repaired and re-seated without re-pasting.
  • -40 °C to +180 °C operating range – covers automotive cabin and under-hood electronics, sealed enclosures, LED fixtures and continuous duty power supplies.
  • Documented high temperature stability – no powdering after 8 days continuous baking at 200 °C and no drying after 5–6 hours at 280 °C on a 0.2 mm film.
  • Low oil separation ≤ 0.3% and low volatility ≤ 0.7% at 200 °C / 24 h – controls pump-out and dry-out on vertical and vibration loaded interfaces.
  • Workability: 350 ± 20 (1/10 mm) penetration – brushing, rolling, screen printing, syringe and cartridge filling, and automatic dispensing lines.
  • Factory-direct engineering support – ISO 9001 quality system, TDS / MSDS / COA with every shipment, custom formulation (conductivity, penetration, colour) and OEM / ODM / private label service.
Technical Data
Property Test Method / Condition Unit Value
Appearance Visual inspection — Grey, glossy, fine paste
Thermal Conductivity ASTM D5470 W/m·K 2.95 ± 0.1 (3.0 W/m·K class)
Thermal Resistance ASTM D5470 @ 25 PSI °C·cm²/W 0.82
Specific Gravity GB/T 13354-1992 / 25 °C g/cm³ 2.5 ± 0.08
Oil Separation (Oil Bleed) SH/T 0324-1992 / 200 °C, 24 h % ≤ 0.3
Volatile Matter SH/T 0337-92 / 200 °C, 24 h % ≤ 0.7
Penetration (Cone Penetration) GB/T 269-2023 / 25 °C 1/10 mm 350 ± 20
High-Temperature Stability 200 °C constant-temperature oven, 0.2 mm film — No powdering after 8 days continuous baking
Temperature Resistance Heating platform, 280 °C, 0.2 mm film — No drying after 5–6 h continuous baking
Breakdown Voltage IEC 60243 / 0.20 mm thickness V/mm 1850
Operating Temperature Range — °C -40 to +180
Compliance — — RoHS 2.0

All values are measured under standard conditions and are for reference only. Actual thermal performance may vary with application conditions, bond line thickness and contact pressure.

Applications — Where HN300 Is Specified
  • New energy vehicle and EV electronics – onboard charger (OBC) power stages, DC-DC converters, BMS heat spreaders, EV charger and charging pile modules, motor controller interfaces, automotive electronics and car refrigerator modules.
  • Power modules and semiconductors – IGBT and MOSFET power modules, transistors, rectifiers, voltage regulators, regulated power supplies and power components.
  • LED and lighting – LED lighting heat dissipation interfaces, street light power modules, driver boards and heat sink interfaces.
  • Server, telecom and microwave – microwave devices, microwave communication and transmission equipment, microwave power supplies, server power supplies and network communication equipment.
  • Home appliance and consumer electronics – home appliance control boards, consumer electronics modules, CPU assemblies, printer heads and power supply modules.
  • Sensors and thermal devices – thermistors, temperature sensors, heating elements and sensor housings.
0.82 C.cm2/W Low Thermal Resistance Thermal Grease 3.0 W/mK Thermal Paste with 1850 V/mm Electrical Insulation for EV OBC Power Module Cooling
Application Instructions
  1. Surface preparation – clean all contact surfaces with a solvent to remove grease, dust and oxidation; ensure surfaces are completely dry.
  2. Application – apply directly by brushing, rolling, automatic dispensing or screen printing.
  3. Spreading – transfer a small amount with a clean razor blade, plastic spatula or clean knife and spread evenly to the required thickness.
  4. Thickness control – the thinner the layer, the better the thermal transfer; excess paste can reduce efficiency. Wipe excess from the edges with a lint-free cloth.
  5. Assembly – assemble the heat sink and heat source immediately after application and torque fasteners to specification to control bond line thickness (BLT).
Packaging, Storage and Shelf Life
Package Size Container Type Notes
1 kg Plastic drum Standard package
5 kg Plastic drum Standard package
Custom sizes — Syringe, cartridge and private label packaging available on request
  • Store in original, tightly sealed containers in a cool, dry, well ventilated area away from direct sunlight; recommended storage temperature below 27 °C.
  • Shelf life: 12 months from date of manufacture when stored unopened and properly sealed.
  • A small amount of silicone oil may separate during storage; this is normal. Stir thoroughly before use and performance is not affected.
  • Transportation: classified as non-dangerous goods (general chemicals). Handle with care to prevent leakage.
  • Industrial / professional use only. Wear nitrile gloves and safety goggles; ensure adequate ventilation and keep containers sealed when not in use.
Quality System and Buyer Support
  • ISO 9001 quality management with in-house testing to ASTM D5470, IEC 60243, GB/T 269-2023, SH/T 0324-1992 and SH/T 0337-92 before every batch release.
  • Documentation pack – TDS, MSDS and COA supplied with each shipment for incoming inspection, customer audits and customs clearance.
  • Custom formulation – conductivity, penetration / viscosity, colour and oil bleed tuned to your drawing or dispense process by our FAE team.
  • OEM / ODM and private label – your brand on the drum, your label on the carton, your language on the documents.
  • Export experience to Southeast Asia – Vietnam, Thailand, Indonesia, Malaysia, the Philippines and Singapore, with export cartons, palletising and shipping documents prepared for factory receiving.
About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

0.82 C.cm2/W Low Thermal Resistance Thermal Grease 3.0 W/mK Thermal Paste with 1850 V/mm Electrical Insulation for EV OBC Power Module Cooling
FAQ — Technical Questions Buyers Ask
Q1: What are the thermal conductivity and thermal resistance of HN300?

HN300 measures 2.95 ± 0.1 W/m·K (3.0 W/m·K class) by ASTM D5470, with a thermal resistance of 0.82 °C·cm²/W at 25 PSI. Thermal resistance at a defined pressure is the value to compare against your current grade, because it already includes the bond line thickness effect.

Q2: Is HN300 electrically insulating enough for a live power module?

HN300 is an insulating grade with a breakdown voltage of 1850 V/mm at 0.20 mm (IEC 60243), so it can provide dielectric isolation between a live device and a grounded heat sink. Confirm the working voltage and required creepage for your design with our engineers before qualification.

Q3: Does the paste dry out, powder or pump out over time?

No. HN300 is non-curing and never hardens. On a 0.2 mm film there is no powdering after 8 days continuous baking at 200 °C and no drying after 5–6 hours at 280 °C. Oil separation is ≤ 0.3% and volatility ≤ 0.7% at 200 °C for 24 h, and the working range is -40 °C to +180 °C.

Q4: Which applications and industries is HN300 used for?

EV onboard chargers (OBC), DC-DC and BMS modules, IGBT and MOSFET power modules, LED lighting and street light drivers, server and microwave communication equipment, home appliance control boards, printer heads, thermistors and temperature sensors.

Q5: What are the MOQ, lead time, sample policy and customization options?

MOQ starts at 1 kilogram in 1 kg or 5 kg plastic drums, with 50 tons per month capacity and 3 to 5 working days delivery for standard drums. Free samples, TDS, MSDS and COA are available for evaluation, and we support custom formulation, OEM, ODM and private label programs for Southeast Asian factories.